Background: Among the numerous osteotomies for correction of hallux valgus, the modified chevron is known for its good intrinsic stability and the scarf for its large corrective potential. An intermediate design, the reversed-L osteotomy, has been developed to combine these competing biomechanical objectives. The purpose of this in vitro study was to compare the structural and local biomechanical performance of these three designs.
Methods: Stiffness, cortical bone strains (a factor relevant to bone remodeling), strength and failure mode of the scarf, modified chevron and reversed-L osteotomies were measured on human specimens in two different loading configurations.
Findings: The scarf osteotomy caused significant changes in stiffness and cortical bone strains with the proximal apex being at the origin of bone failure. The chevron and reversed-L had a generally comparable response to the intact bone. The chevron specimens failed by pivoting of the distal fragment, and the reversed-L by pivoting or fracture.
Interpretation: This is the first study to investigate the cortical bone strain changes induced by these invasive osteotomies. Alterations from the intact bone response could be directly related to the design of the osteotomy. Notably, the critical weakening proximal apex of the scarf is avoided in the reversed-L, leading to results comparable to the chevron. This study provides support in favor of the intermediate design of the reversed-L as an effective compromise between the competing biomechanical objectives of corrective potential and mechanical stability.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.clinbiomech.2010.05.002 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Exploration of the dynamics of otic capsule and intracochlear pressure: Numerical insights with experimental validation.
J Acoust Soc Am
January 2025
Department of Otorhinolaryngology, Head and Neck Surgery, University Hospital Zurich, University of Zurich, Zurich, Switzerland.
The otic capsule and surrounding temporal bone exhibit complex 3D motion influenced by frequency and location of the bone conduction stimulus. The resultant correlation with the intracochlear pressure is not sufficiently understood, thus is the focus of this study, both experimentally and numerically. Experiments were conducted on six temporal bones from three cadaver heads, with BC hearing aid stimulation applied at the mastoid and classical BAHA locations across 0.
View Article and Find Full Text PDFImplant stability quotient and osteogenic process in dental implant sites prepared using piezoelectric technique: A study in minipigs.
J Prosthodont
January 2025
Department of Clinical and Biological Sciences, University of Turin, Turin, Italy.
Purpose: Few studies have explored the bone response in dental implant sites prepared using a piezoelectric device, indicating moderate effectiveness in enhancing secondary stability and osteogenesis. This study seeks to expand our understanding of the changes in biological, clinical, and radiographic parameters, during the initial phases of osseointegration in sites prepared with piezoelectric surgery.
Materials And Methods: Two implant sites were prepared in the tibia of four minipigs.
Diagnostic approach for the rare anterior variant of mandibular bone depression often misdiagnosed as tumorous lesions.
J Dent Sci
January 2025
Department of Oral and Maxillofacial Radiology, Yonsei University College of Dentistry, Seoul, Republic of Korea.
Background/purpose: This study analyzed the clinical and imaging features of lingual mandibular bone depression (LMBD) in the anterior mandible, aiming to prevent misdiagnosis and unnecessary surgical procedures.
Materials And Methods: The patients who visited a university dental hospital for painless radiolucency in the anterior mandible from January 2010 to December 2022 were retrospectively reviewed. Twelve cases of LMBD in the anterior mandible that are confirmed by biopsy or long-term follow-up were identified.
Using optimization approach to design dental implant in three types of bone quality - A finite element analysis.
J Dent Sci
January 2025
Department of Physical Therapy and Assistive Technology, National Yang Ming Chiao Tung University, Taipei, Taiwan.
Background/purpose: The use of finite element (FE) analysis in implant biomechanics offers many advantages over other approaches in simulating the complexity of clinical situations. The aim of this study was to perform an optimization analysis of dental implants with different thread designs in three types of bone quality.
Materials And Methods: The three-dimensional FE model of a mandibular bone block with a screw-shaped dental implant and superstructure was simulated.
Evaluation of cortical bone thickness at the nasomaxillary and zygomaticomaxillary buttresses using cone-beam computed tomography imaging for Le Fort I osteotomy.
J Dent Sci
January 2025
School of Dentistry, China Medical University, Taichung, Taiwan.
Background/purpose: Studies have indicated that 50%-55% of the population have malocclusion, and approximately 5%-10% require orthognathic surgery to correct this condition. Optimal placement of plates and screws significantly affects the success rate of the surgery and postoperative stability. This study evaluates the cortical thickness of the maxillary bone in the nasomaxillary and zygomaticomaxillary buttress regions in Taiwanese patients based on cone-beam computed tomography (CBCT) images.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!