A novel configuration for single-mode all-fiber optic, liquid crystal based intensity modulation is suggested. The electrodes have the form of two thin indium tin oxide films, one of which is directly deposited on top of the polished face of the optical fiber. Intensity modulation using nematic and ferroelectric liquid crystal is demonstrated showing that the device offers the potential for low loss (<0.5 dB), high modulation depth (>20 dB), and moderate drive voltages for frequencies up to several megahertz at 633-nm wavelength.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/AO.30.000328 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Development of a novel high-frequency reciprocal structure fiber optical pulsed current sensor.
Rev Sci Instrum
January 2025
Department of Plasma Physics and Fusion Engineering, University of Science and Technology of China, Hefei 230026, China.
A novel all-fiber optic current sensor (FOCS) is designed specifically for the measurement of large transient currents based on the Faraday effect. A reciprocal symmetric structure is incorporated into the optical sensing loop, and the current dependent phase demodulation is achieved by using a passive optical fiber coupler and the homodyne detection scheme. This design offers several advantages, including structural simplicity, high voltage insulation, low noise, high linearity, and excellent frequency response, and is highly suitable for use in any system of high-voltage, high-power, and high-frequency in nature.
View Article and Find Full Text PDFWe propose and demonstrate an ultra-wide tunable mode-locked all-fiber laser based on nonlinear amplifying loop mirror (NALM) with the output of cylindrical vector beams (CVBs). The tuning range covers from 1029 nm to 1098 nm through the intracavity nonlinear polarization evolution (NPE) filter effect. The switchable CVBs between radially and azimuthally polarized beams with mode purity above 90% are generated by incorporating a broadband few-mode long-period fiber grating (LPFG).
View Article and Find Full Text PDFHollow-core optical fiber (HCF) gas cells are an attractive option for many applications including metrology and non-linear optics due to the enhanced gas-light interaction length in a compact and lightweight format. Here, we report the first demonstration and characterization of a selectively pressurized, hermetically sealed hollow-core fiber-based gas cell, where the core is filled with a higher gas pressure than the cladding to enhance the optical performance. This differential gas pressure creates a gas-induced differential refractive index (GDRI) that is shown to enable significant modification of the HCF's optical performance.
View Article and Find Full Text PDFThe flat-top beams have significant potential for applications in micromachining and biomedicine, due to their unique intensity distribution. Therefore, spatiotemporal flat-top beams, which are all flat-top in both spatial and time domains, may significantly advance its development. Here, we demonstrate the generation of a spatiotemporal flat-top beam using an all-fiber mode-locked laser.
View Article and Find Full Text PDFAll-Fiber Micro-Ring Resonator Based p-Si/n-ITO Heterojunction Electro-Optic Modulator.
Materials (Basel)
January 2025
State Key Laboratory of Radio Frequency Heterogeneous Integration, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology, Institute for Advanced Study in Nuclear Energy & Safety, Interdisciplinary Center of High Magnetic Field Physics of Shenzhen University, College of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen 518060, China.
With the rapid advancement of information technology, the data demands in transmission rates, processing speed, and storage capacity have been increasing significantly. However, silicon electro-optic modulators, characterized by their weak electro-optic effect, struggle to balance modulation efficiency and bandwidth. To overcome this limitation, we propose an electro-optic modulator based on an all-fiber micro-ring resonator and a p-Si/n-ITO heterojunction, achieving high modulation efficiency and large bandwidth.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!