Purpose: to present a patient in whom, during LASIK with the IntraLase femtosecond laser (Abbott Medical Optics), unintended epithelial (instead of anterior stromal) flaps were created in both eyes.
Methods: a 28-year-old man underwent bilateral LASIK using the IntraLase femtosecond laser programmed to create 100-microm flaps. Flap creation was performed uneventfully in both eyes but flap thickness was thinner than attempted. The flaps were easily torn during flap lift because they appeared to consist of epithelium only. Therefore, the procedure was immediately converted to photorefractive keratectomy with the use of mitomycin C.
Results: re-epithelialization occurred 3 days after the procedure in both eyes. Three months after treatment, uncorrected distance visual acuity was 20/25 in the right eye and 20/20 in the left eye with no signs of corneal haze on slit-lamp examination.
Conclusions: despite the advantages of the IntraLase femtosecond laser in the creation of a LASIK flap, complications in terms of flap thickness may occur.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.3928/1081597X-20100525-03 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Evaluation of corneal incision in femtosecond laser-assisted phacoemulsification.
Clinics (Sao Paulo)
January 2025
Horta Institute, Rio de Janeiro, Brazil.
Purpose: This study aimed to evaluate the accuracy and quality of healing of main corneal incisions in femtosecond laser procedures in cataract surgery.
Methods: It was a prospective, non-randomized, investigator-masked study. A total of 37 eyes of 37 patients with indication for cataract surgery were separated into two groups in this prospective, nonrandomized study: Femto group, with incisions automated by femtosecond laser (18 eyes), and Phaco group, with incisions made using a keratome (19 eyes).
Flexible Vibration Sensors with Omnidirectional Sensing Enabled by Femtosecond Laser-Assisted Fabrication.
Polymers (Basel)
January 2025
State Key Laboratory of Precision Manufacturing for Extreme Service Performance, College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China.
Vibration sensors are integral to a multitude of engineering applications, yet the development of low-cost, easily assembled devices remains a formidable challenge. This study presents a highly sensitive flexible vibration sensor, based on the piezoresistive effect, tailored for the detection of high-dynamic-range vibrations and accelerations. The sensor's design incorporates a polylactic acid (PLA) housing with cavities and spherical recesses, a polydimethylsiloxane (PDMS) membrane, and electrodes that are positioned above.
View Article and Find Full Text PDFRadiation-Induced Wavelength Shifts in Fiber Bragg Gratings Exposed to Gamma Rays and Neutrons in a Nuclear Reactor.
Sensors (Basel)
January 2025
Soreq NRC, Yavne 81800, Israel.
Fiber Bragg gratings (FBGs) inscribed by UV light and different femtosecond laser techniques (phase mask, point-by-point, and plane-by-plane) were exposed-in several irradiation cycles-to accumulated high doses of gamma rays (up to 124 MGy) and neutron fluence (8.7 × 10/cm) in a research-grade nuclear reactor. The FBG peak wavelengths were measured continuously in order to monitor radiation-induced shifts.
View Article and Find Full Text PDFTuning Electrical Conductivity and Ultrafast Optical Nonlinearity of Reduced-GO Films Ablated by Femtosecond Laser Direct Writing.
Molecules
January 2025
Information Materials and Intelligent Sensing Laboratory of Anhui Province, Anhui University, Hefei 230601, China.
Carbon-based nanomaterials with excellent electrical and optical properties are highly sought after for a plethora of hybrid applications, ranging from advanced sustainable energy storage devices to opto-electronic components. In this contribution, we examine in detail the dependence of electrical conductivity and the ultrafast optical nonlinearity of graphene oxide (GO) films on their degrees of reduction, as well as the link between the two properties. The GO films were first synthesized through the vacuum filtration method and then reduced partially and controllably by way of femtosecond laser direct writing with varying power doses.
View Article and Find Full Text PDFSimulation and Experimental Study of the Single-Pulse Femtosecond Laser Ablation Morphology of GaN Films.
Micromachines (Basel)
January 2025
School of Physics and Optoelectronic Engineering, Beijing University of Technology, Beijing 100124, China.
Gallium nitride (GaN) exhibits distinctive physical and chemical properties that render it indispensable in a multitude of electronic and optoelectronic devices. Given that GaN is a typical hard and brittle material that is difficult to machine, femtosecond laser technology provides an effective and convenient tool for processing such materials. However, GaN undergoes complex physical and chemical changes during high-power ablation, which poses a challenge to high-precision processing with controllable geometry.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!