Background: Because of better comfort, air conditioning systems are a common feature in automobiles these days. However, its impact on the number of particles and microorganisms inside the vehicle--and by this its impact on the risk of an allergic reaction--is yet unknown.

Methods: Over a time period of 30 months, the quality of air was investigated in three different types of cars (VW Passat, VW Polo FSI, Seat Alhambra) that were all equipped with a automatic air conditioning system. Operation modes using fresh air from outside the car as well as circulating air from inside the car were examined. The total number of microorganisms and the number of mold spores were measured by impaction in a high flow air sampler. Particles of 0.5 to 5.0 microm diameter were counted by a laser particle counter device.

Results: Overall 32 occasions of sampling were performed. The concentration of microorganisms outside the cars was always higher than it was inside the cars. Few minutes after starting the air conditioning system the total number of microorganisms was reduced by 81.7%, the number of mold spores was reduced by 83.3%, and the number of particles was reduced by 87.8%. There were no significant differences neither between the types of cars nor between the types of operation mode of the air conditioning system (fresh air vs. circulating air). All parameters that were looked for in this study improved during utilization of the car's air conditioning system.

Conclusions: We believe that the risk of an allergic reaction will be reduced during use also. Nevertheless, we recommend regular maintenance of the system and replacement of older filters after defined changing intervals.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC2890006PMC
http://dx.doi.org/10.1186/1471-2334-10-146DOI Listing

Publication Analysis

Top Keywords

air conditioning
24
air
13
conditioning system
12
quality air
8
conditioning systems
8
number particles
8
risk allergic
8
types cars
8
fresh air
8
circulating air
8

Similar Publications

Objective: To verify the association between different types of ambient ventilation in Central Sterile Supply Department (CSSD), fractional exhaled nitric oxide (FeNO) values, and respiratory symptoms of workers .

Methods: CSSD workers from five hospitals were evaluated in three different ventilation systems: negative air pressure, air conditioning, and natural ventilation. The prevalence of respiratory symptoms was evaluated by The European Community Respiratory Health Survey.

View Article and Find Full Text PDF

The increasing demand for energy in cooling systems due to global warming presents a significant challenge. Conventional air-conditioning methods exacerbate climate change by contributing to heightened carbon emissions. Glass facades, renowned in modern architecture for their versatility and aesthetic appeal, inadvertently trap solar radiation, resulting in heat buildup and the greenhouse effect.

View Article and Find Full Text PDF

Objective: To evaluate the influence of different cleaning methods, surface treatments, and aging on the repair bond strength to a CAD/CAM glass-ceramic.

Materials And Methods: Forty-eight lithium disilicate CAD/CAM ceramic blocks were fabricated, sintered, and embedded in acrylic resin. After contamination with human saliva, they were divided according to the factors "Cleaning method" (Control-water/air spray, Air-particle abrasion with AlO, Ivoclean cleaning paste), "Surface treatment" (5% Hydrofluoric acid-HF + Silane, Monobond Etch & Prime-MEP), and "Aging" (thermocycling, no thermocycling).

View Article and Find Full Text PDF

High-Pressure Refrigerant Gas Injection Injury to the Hand.

J Am Acad Orthop Surg Glob Res Rev

January 2025

From the Department of Orthopaedics and Sports Medicine, Mercy Health St. Vincent Medical Center, Toledo, OH (Dr. Simmons); the Department of Orthopedic Surgery, University Hospitals Cleveland Medical Center, Cleveland, OH (Dr. Vesselle); the Department of Orthopaedic Surgery, MetroHealth Medical Center, Cleveland, OH (Dr. Yildirim, Dr. Bafus); the Town Center Orthopaedics, Reston, VA (Dr. Yildirim); and the Louis Stokes Cleveland VA Medical Center, Cleveland, OH (Dr. Bafus).

High-pressure injection injuries, although rare, are commonly discussed orthopaedic surgical emergencies. In many cases, high-pressure injection injuries can have detrimental effects on the patient. However, there are rare instances where surgical intervention may be more harmful than helpful.

View Article and Find Full Text PDF

This paper provides a detailed analysis of the operation of representative forging tools (in the context of using various surface engineering techniques) used in the process of the hot forging of nickel-chromium steel elements. The influence of the microstructure and hardness of the material on the durability of the tools is also discussed, which is important for understanding the mechanisms of their wear. The research showed that the standard tools used in the process (only after nitriding) as a reference point worked for the shortest period, making an average of about 1400 forgings.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!