Oxygen mass transfer in a human tissue-engineered trachea.

Biomaterials

Institute on Membrane Technology, National Research Council of Italy, ITM-CNR, c/o University of Calabria, Via P. Bucci cubo 17/C, I-87030 Rende (CS), Italy.

Published: July 2010

On June 2008, the first human tissue-engineered trachea replacement was performed using decellularized (de-antigenised) cadaveric donor trachea, seeded with recipient epithelial cells on the internal surface of the graft and mesenchymal stem-cell-derived chondrocytes on the external. During the follow-up, cytological analysis at 4 postoperative days showed a migration of the stem-cells derived chondrocytes from the outer to the inner surface of the first 2 cm of the graft length. With the aim to rationalize these clinical findings, and under the hypothesis that cellular migration is driven by the oxygen gradients developing from the external part of the construct (exposed to O(2) deficiency) towards the better oxygenated epithelial region, an accurate computational model of oxygen transport in the trachea engineered construct was developed and solved using finite element method (FEM). Results confirm that critical limitation to oxygen transport prevalently occurs from proximal to middle section, within the first 2.8 cm of longitudinal length, in good agreement with experimental observation. In the proximal section, recognized as the most critical part of the engineered construct, the severe O(2) mass transfer limitation causes a drastic reduction of the diffusive flux within a distance of 650 microm. At cell density of 1 x 10(7)cells/cm(3), the 30% c.a of the total section area is under oxygen deficiency (O(2) partial pressure below the critical threshold of 38 mmHg). Along the whole tracheal construct, the Thiele modulus ranges within 2.3 and 3.7 in the external chondrocyte compartment, confirming thus the importance of the mass transfer limitation to oxygen diffusion rate. In general, the efficiency of the O(2) transport reduces considerably in the region close to proximal section.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.biomaterials.2010.03.013DOI Listing

Publication Analysis

Top Keywords

mass transfer
12
human tissue-engineered
8
tissue-engineered trachea
8
surface graft
8
oxygen transport
8
engineered construct
8
limitation oxygen
8
transfer limitation
8
oxygen
6
oxygen mass
4

Similar Publications

Mass transfer governs the overall catalytic performance of heterogeneous catalysts considerably; however, this fundamental research has often been ignored. Here, macroporous SiO-supported Pt nanoparticle (Pt/SiO-M) and mesoporous SiO-supported Pt nanoparticle (Pt/SiO-m) catalysts were specifically fabricated by a facile thermal reduction step to engineer the resultant Pt nanoparticles showing similar physiochemical properties while possessing completely different porous microstructures exclusively originating from SiO supports. On this basis, a platform to explore the crucial mass transfer difference affecting catalytic activity is then established by systematically practicing industry-important benzene oxidation measurements.

View Article and Find Full Text PDF

A Schiff-base-modified Cu nanocluster with redox dual-catalytic sites and fluorescence sensing for the degradation and detection of atrazine.

Mater Horiz

January 2025

State Key Laboratory of Digital Medical Engineering, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, P. R. China.

Atrazine is a widely used and heavily contaminating pesticide. In this work, we designed and synthesized a versatile catalyst for the degradation and fluorescent detection of atrazine. This catalyst consists of Cu clusters modified by a Schiff base.

View Article and Find Full Text PDF

Weak H-Bond Interface Environment for Stable Aqueous Zinc Batteries.

ACS Nano

January 2025

School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore 639798, Singapore.

Hydrogen evolution reaction and Zn dendrite growth, originating from high water activity and the adverse competition between the electrochemical kinetics and mass transfer, are the main constraints for the commercial applications of the aqueous zinc-based batteries. Herein, a weak H-bond interface with a suspension electrolyte is developed by adding TiO nanoparticles into the electrolytes. Owing to the strong polarity of Ti-O bonds in TiO, abundant hydroxyl functional groups are formed between the TiO active surface and aqueous environment, which can produce a weak H-bond interface by disrupting the initial H-bond networks between the water molecules, thereby accelerating the mass transfer of Zn and reducing the water activity.

View Article and Find Full Text PDF

Microbial Fuel Cells (MFCs) are innovative environmental engineering systems that harness the metabolic activities of microbial communities to convert chemical energy in waste into electrical energy. However, MFC performance optimization remains challenging due to limited understanding of microbial metabolic mechanisms, particularly with complex substrates under realistic environmental conditions. This study investigated the effects of substrate complexity (acetate vs.

View Article and Find Full Text PDF

Coplanar Dimeric Acceptors with Bathochromic Absorption and Torsion-Free Backbones through Precise Fluorination Enabling Efficient Organic Photovoltaics with 18.63% Efficiency.

Adv Sci (Weinh)

January 2025

Guangdong-Hong Kong Joint Laboratory for Carbon Neutrality, Jiangmen Laboratory of Carbon Science and Technology, Jiangmen, Guangdong, 529199, P. R. China.

Giant dimeric acceptors (GDAs), a sub-type of acceptor materials for organic solar cells (OSCs), have garnered much attention due to the synergistic advantages of their monomeric and polymeric acceptors, forming a well-defined molecular structure with a giant molecular weight for high efficiency and stability. In this study, for the first time, two new GDAs, DYF-V and DY2F-V are designed and synthesized for OSC operation, by connecting one vinylene linker with the mono-/di-fluorinated end group on two Y-series monomers, respectively. After fluorination, both DYF-V and DY2F-V exhibit bathochromic absorption and denser packing modes due to the stronger intramolecular charge transfer effect and torsion-free backbones.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!