AI Article Synopsis
Article Abstract
This study proposes the use of carbon nanotubes (CNTs) as reinforcement to enhance the mechanical properties of a polylactide-caprolactone copolymer (PLC) matrix. Biological interaction of PLC-CNT composites with human osteoblast cells is also investigated. Addition of 2 wt % CNT shows very uniform dispersion in the copolymer matrix, whereas 5 wt % CNT shows severe agglomeration and high porosity. PLC-2 wt % CNT composite shows an improvement in the mechanical properties with an increase in the elastic modulus by 100% and tensile strength by 160%, without any adverse effect on the ductility up to 240% elongation. An in vitro biocompatibility study on the composites shows an increase in the viability of human osteoblast cells compared to the PLC matrix, which is attributed to the combined effect of CNT content and surface roughness of the composite films.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/am900423q | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Carbon nanotube reinforced polylactide-caprolactone copolymer: mechanical strengthening and interaction with human osteoblasts in vitro.
ACS Appl Mater Interfaces
November 2009
Mechanical and Materials Engineering, Biological Sciences, and Biomedical Engineering, Florida International University, Miami, Florida 33174, USA.
This study proposes the use of carbon nanotubes (CNTs) as reinforcement to enhance the mechanical properties of a polylactide-caprolactone copolymer (PLC) matrix. Biological interaction of PLC-CNT composites with human osteoblast cells is also investigated. Addition of 2 wt % CNT shows very uniform dispersion in the copolymer matrix, whereas 5 wt % CNT shows severe agglomeration and high porosity.
View Article and Find Full Text PDFTailored drug release from biodegradable stent coatings based on hybrid polyurethanes.
J Control Release
August 2009
Department of Macromolecular Science and Engineering, Case Western Reserve University, Cleveland, OH 44106, United States.
Highly adjustable and precisely controllable drug release from a biodegradable stent coating was achieved using a unique family of nanostructured hybrid polyurethanes. These polyurethanes are polyhedral oligosilsesquioxane thermoplastic polyurethanes (POSS TPUs) featuring alternating multiblock structures formed by nanostructured hard segments of POSS and biodegradable soft segments of a polylactide/caprolactone copolymer (P(DLLA-co-CL)) incorporating polyethylene glycol (PEG) covalently. POSS aggregated to form crystals serving as physical crosslinks on the nanometer scale, while the soft segments were designed carefully to modulate the drug release rate from the POSS TPU stent coatings in PBS buffer solution, with 90% of the drug releasing from within half a day to about 90 days.
View Article and Find Full Text PDFCellular reactions to polylactide-based sponge and collagen gel in subcutaneous tissue.
J Oral Rehabil
January 2003
Department of Dental Materials Science and Technology, Iwate Medical University School of Dentistry, Iwate, Japan.
Polylactide copolymer and collagen are now used as bio-absorbable scaffold materials for restoration of lost oral tissues. Polylactide caprolactone (PLCL) sponge and collagen gel were examined for their cellular reactions when implanted in 8-week-old Sprague-Dawley (SD) rats' subcutaneous tissues for up to 8 weeks. The PLCL sponges were slowly absorbed by a mild chronic inflammation process in which multinucleated giant cells covered and slowly captivated the sponge surfaces without thick encapsulation.
View Article and Find Full Text PDFHighly permeable polylactide-caprolactone nerve guides enhance peripheral nerve regeneration through long gaps.
Biomaterials
August 1999
Department of Cell Biology and Physiology, Universitat Autònoma de Barcelona, Bellaterra, Spain.
We compared regeneration and functional reinnervation after sciatic nerve resection and tubulization repair with bioresorbable guides of poly(L-lactide-co-epsilon-caprolactone) (PLC) and permanent guides of polysulfone (POS) with different degrees of permeability, leaving a 6 mm gap in different groups of mice. Functional reinnervation was assessed to determine recovery of motor, sensory and sweating functions in the hindpaw during four months postoperation. Highly permeable PLC guides allowed for faster and higher levels of reinnervation for the four functions tested than impermeable or low-permeable PLC guides, while semipermeable 30 and 100 kDa POS tubes yielded very low levels of reinnervation.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!