We study in detail here the application of transparent, conductive carbon single-wall nanotube (SWNT) networks as electrodes in flexible organic light-emitting diodes (FOLEDs). Overall comparisons of these networks to the commonly used electrodes poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and indium tin oxide (ITO) are made, and SWNT networks are shown to have excellent optical and superior mechanical properties. The effects of protruding nanotubes, rough surface morphology, and SWNT network-adjacent layer dewetting are shown to be problematic, and approaches for addressing these issues are identified. The mechanical properties of SWNT networks and ITO are compared, and SWNT networks are shown to exhibit more durable sheet conductance under bending, which leads to bendable FOLEDs. We demonstrated FOLEDs with SWNT network anodes that exhibit outstanding light output and meet display requirements. SWNT-based FOLEDs show comparable lifetime performances to ITO-based devices. The promise and the remaining challenges for implementing SWNT networks in organic light-emitting diodes are discussed.

Download full-text PDF

Source
http://dx.doi.org/10.1088/0957-4484/21/15/155202DOI Listing

Publication Analysis

Top Keywords

swnt networks
20
organic light-emitting
12
light-emitting diodes
12
flexible organic
8
mechanical properties
8
swnt
7
networks
6
diodes transparent
4
transparent carbon
4
carbon nanotube
4

Similar Publications

Article Synopsis
  • - This paper discusses a new biosensor platform using single-walled carbon nanotubes (sc-SWNTs) to detect amyloid-β (Aβ) by measuring changes in electrical resistance.
  • - The researchers created a high-purity sc-SWNT ink through a special method, and the sensor showed a significant increase in resistance with higher Aβ1-42 concentrations.
  • - The optimized sensor demonstrated a 29% sensitivity for detecting Aβ at very low concentrations (10 pM) and can be adapted to measure other substances by changing the bioreceptors used.
View Article and Find Full Text PDF

Mechanoluminescent/Electric Dual-Mode Sensors Enabled by Trace Carbon Nanotubes.

Small

December 2024

Henan Key Laboratory of Diamond Optoelectronic Materials and Devices, Key Laboratory of Material Physics, Ministry of Education, School of Physics, Zhengzhou University, Zhengzhou, 450052, China.

Mechanoluminescence (ML)-based sensors are emerging as promising wearable devices, attracting attention for their self-powered visualization of mechanical stimuli. However, challenges such as weak brightness, high activation threshold, and intermittent signal output have hindered their development. Here, a mechanoluminescent/electric dual-mode strain sensor is presented that offers enhanced ML sensing and reliable electrical sensing simultaneously.

View Article and Find Full Text PDF

Investigation on Junction Contacts of Semiconducting Carbon Nanotube Networks Using Conductive Atomic Force Microscopy.

ACS Appl Mater Interfaces

September 2024

State Key Laboratory for Silicon and Advanced Semiconductor Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou, Zhejiang 310027, China.

Semiconductor single-walled carbon nanotube (s-SWNT) networks have gained prominence in electronic devices due to their cost-effectiveness, relatively production-naturality, and satisfactory performance. Configuration, density, and resistance of SWNT-SWNT junctions are considered crucial factors influencing the overall conductivity of s-SWNT networks. In this study, we present a method for inferring the lower bounds of the SWNT-SWNT junction resistance in s-SWNT networks based on conductive atomic force microscopy TUNA images.

View Article and Find Full Text PDF

Single walled carbon nanotubes covalently functionalized by a ruthenium complex for photocatalytic oxidations.

J Colloid Interface Sci

September 2024

Organic Chemistry Department, Universidad Autónoma de Madrid, 28049 Madrid, Spain; Institute for Advanced Research in Chemical Sciences (IAdChem), Universidad Autónoma de Madrid, 28049 Madrid, Spain; Center for Innovation in Advanced Chemistry (ORFEO-CINQA), Universidad Autónoma de Madrid, Madrid 28049, Spain. Electronic address:

The covalent bonding of a ruthenium bipyridine complex derivative with the aromatic network of single walled carbon nanotubes (SWNT) through a stepwise protocol is presented, thus yielding the sample SWNT-Ru. To do that, an-amino decorated phenanthroline is bonded to the nanotube by means of the diazonium chemistry protocol, providing anchoring points for discrete organometallic units as depicted by the solid characterization techniques employed. The hybrid material, able to emit upon excitation, is active in the visible light-driven photocatalytic oxidation of organic sulfides to sulfoxides.

View Article and Find Full Text PDF

Microbial infections represent a significant health risk, often leading to severe complications and, in some cases, even fatalities. As a result, there is an urgent need to explore innovative drug delivery systems and alternative therapeutic techniques. The photothermal therapy has emerged as a promising antibacterial approach and is the focus of this study.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!