A range of porous carbon-based monolithic (PCM) rods with flow-through pore sizes of 1, 2, 5 and 10 mum, were produced using a silica particle template method. The rods were characterised using SEM and energy-dispersive X-ray spectroscopy, BET surface area and porous structure analysis, dilatometry and thermal gravimetry. SEM evaluation of the carbon monolithic structures revealed an interconnected rigid bimodal porous structure and energy-dispersive X-ray spectroscopy analysis verified the quantitative removal of the embedded silica beads. The specific surface areas of the 1, 2, 5 and 10 mum rods were 178, 154, 84 and 125 m(2)/g after pyrolysis and silica removal, respectively. Shrinkage of the monolithic rods during pyrolysis is proportional to the particle size of the silica used and ranged from 9 to 12%. Mercury porosimetry showed a narrow distribution of pore sizes, with an average of approximately 700 nm for the 1 mum carbon monolith. The suitability of bare and surface oxidised PCM rods for the use as a stationary phase for reversed and normal phase LC was explored. The additional modification of PCM rods with gold micro-particles followed by 6-mercaptohexanoic acid was performed and ion-exchange properties were evaluated.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/jssc.200900845 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Improved solar still productivity using PCM and nano- PCM composites integerated energy storage.
Sci Rep
July 2024
Department of Mechanical Engineering, Wollo University, Dessie, Ethiopia.
The study investigates the impact of Phase Change Material (PCM) and nano Phase Change Materials (NPCM) on solar still performance. PCM and a blend of NPCM are placed within 12 copper tubes submerged in 1 mm of water to enhance productivity. Thermal performance is assessed across four major scenarios with a fixed water level of 1 mm in the basin.
View Article and Find Full Text PDFControlling chemical functionalization and achieving stable electrode-molecule interfaces for high-performance electrochemical energy storage applications remain challenging tasks. Herein, we present a simple, controllable, scalable, and versatile electrochemical modification approach of graphite rods (GRs) extracted from low-cost Eveready cells that were covalently modified with anthracene oligomers. The anthracene oligomers with a total layer thickness of ∼24 nm on the GR electrode yield a remarkable specific capacitance of ∼670 F g with good galvanostatic charge-discharge cycling stability (10 000) recorded in 1 M HSO electrolyte.
View Article and Find Full Text PDFImprovement of heat transfer within phase change materials using V-shaped rods.
Heliyon
April 2024
Control and Systems Engineering Department, University of Technology, Baghdad, 10066, Iraq.
This study numerically investigated the improvement of heat transmission to phase change material (PCM) paraffin wax in a triangular cell with and without fins. The enthalpy-porosity combination was quantitatively evaluated using the ANSYS/FLUENT 20 program. Materials with the phase shifts of paraffin wax were used in this study (RT42).
View Article and Find Full Text PDFTruly-optimized PWR lattice for innovative soluble-boron-free small modular reactor.
Sci Rep
June 2021
Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea.
A novel re-optimization of fuel assembly and new innovative burnable absorber (BA) concepts are investigated in this paper to pursue a high-performance soluble-boron-free (SBF) small modular reactor (SMR), named autonomous transportable on-demand reactor module (ATOM). A truly optimized PWR (TOP) lattice concept has been introduced to maximize the neutron economy while enhancing the inherent safety of an SBF pressurized water reactor. For an SBF SMR design, the 3-D centrally-shielded BA (CSBA) design is utilized and another innovative 3-D BA called disk-type BA (DiBA) is proposed in this study.
View Article and Find Full Text PDFAPSD up to 100 kHz dataset measured in the IPEN/MB-01 research reactor facility.
Data Brief
December 2020
Nuclear Engineering Center, Nuclear and Energy Research Institute (IPEN), 2242 Prof. Lineu Prestes Avenue, 05508-000, Cidade Universitária, São Paulo, SP, Brazil.
The data presented in this work are from the very accurate reactor noise measurements performed in the IPEN/MB-01 research reactor facility. The quantity inferred from the measured data was the Auto Power Spectral Density (APSD) with the frequency range extended up to 100 kHz. The core configuration considered a short version of the IPEN/MB-01 core, consisted of a 26 × 24 rectangular array of fuel rods with control banks totally withdrawn.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!