We present both numerical and experimental studies of an all-fiber device based on the integration of metallic electrodes into photonic crystal fibers (PCF). The device operation consists on applying electrical current to the electrodes which, by Joule effect, expand and squeeze the PCF microstructure in a preferential direction, altering both phase and group birefringence. We investigate the effect of integrating electrodes into the fiber and the dependence of the device sensitivity on the electrode configuration and composition.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OE.18.002842 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Enhanced Acoustoelectric Energy Harvesting with TiCT MXene in an All-Fiber Nanogenerator.
ACS Appl Mater Interfaces
January 2025
Institute for Frontier Materials, Deakin University, Waurn Ponds, Victoria 3216, Australia.
Materials and devices that harvest acoustic energy can enable autonomous powering of microdevices and wireless sensors. However, traditional acoustic energy harvesters rely on brittle piezoceramics, which have restricted their use in wearable electronic devices. To address these limitations, this study involves the fabrication of acoustic harvesters using electrospinning of the piezoelectric polymer PVDF-TrFE onto fabric-based electrodes.
View Article and Find Full Text PDFBio-inspired e-skin with integrated antifouling and comfortable wearing for self-powered motion monitoring and ultra-long-range human-machine interaction.
J Colloid Interface Sci
February 2025
Key Laboratory of Bionic Engineering (Ministry of Education), College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin 130022, China. Electronic address:
Electronic skin (e-skin) inspired by the sensory function of the skin demonstrates broad application prospects in health, medicine, and human-machine interaction. Herein, we developed a self-powered all-fiber bio-inspired e-skin (AFBI E-skin) that integrated functions of antifouling, antibacterial, biocompatibility and breathability. AFBI E-skin was composed of three layers of electrospun nanofibrous films.
View Article and Find Full Text PDFElectrospun fiber patches for inflammatory skin diseases - Correlating in vitro drug release with ex vivo permeation.
Biomater Adv
January 2025
Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark. Electronic address:
In this proof-of-concept study, we aimed to develop an anti-inflammatory patch that in contrast to the semi-solid standard therapy is dry and non-greasy, and only needs to be changed once a day due to continuous release of the active ingredient over 24 h. While fiber materials for the treatment of inflammatory skin diseases have been reported in the literature, the majority of studies focuses solely on material characterization including in vitro release studies; however, there is a lack of ex vivo permeation studies as well as comparison with standard therapy. However, such experiments are crucial to deduct the potential efficacy of the drug delivery system, as skin absorption of the drug may be the rate-limiting step and not the drug release.
View Article and Find Full Text PDFPhotoacoustic (PA) remote sensing (PARS) microscopy represents a significant advancement by eliminating the need for traditional acoustic coupling media in PA microscopy (PAM), thereby broadening its potential applications. However, current PARS microscopy setups predominantly rely on free-space optical components, which can be cumbersome to implement and limit the scope of imaging applications. In this study, we develop an all-fiber miniature non-contact PA probe based on PARS microscopy, utilizing a 532-nm excitation wavelength, and showcase its effectiveness in in vivo vascular imaging.
View Article and Find Full Text PDFIsotropically Polarized Bipiezoelectric Polyacrylonitrile-Poly(vinylidene Fluoride) Advanced Triboelectric Nanogenerator for Operation in High-Humidity Environments.
ACS Appl Mater Interfaces
October 2024
School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China.
Conventional hybrid piezo-triboelectric nanogenerators (PTNGs) have potential applications as energy supply devices for microelectronic devices, but their low power density and unstable performance under high-humidity conditions are challenges that need to be solved. Here, we report a novel flexible hybrid bifiezo-triboelectric nanogenerator (Bi-PTNG) based on isotropic polarization design of piezoelectric PVDF and PAN nanofiber membranes, which greatly improves power density of devices and performances in high-humidity conditions. The performance enhancement mechanism of the Bi-PTNG was investigated by model analysis, experimental measurements, and simulations.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!