A novel aerated treatment pond for enhanced biodegradation of groundwater contaminants was tested under field conditions. Coconut fibre and polypropylene textiles were used to encourage the development of contaminant-degrading biofilms. Groundwater contaminants targeted for removal were benzene, methyl tert-butyl ether (MTBE) and ammonium. Here, we present data from the first 14 months of operation and compare contaminant removal rates, volatilization losses, and biofilm development in one pond equipped with coconut fibre to another pond with polypropylene textiles. Oxygen concentrations were constantly monitored and adjusted by automated aeration modules. A natural transition from anoxic to oxic zones was simulated to minimize the volatilization rate of volatile organic contaminants. Both ponds showed constant reductions in benzene concentrations from 20 mg/L at the inflow to about 1 microg/L at the outflow of the system. A dynamic air chamber (DAC) measurement revealed that only 1% of benzene loss was due to volatilization, and suggests that benzene loss was predominantly due to aerobic mineralization. MTBE concentration was reduced from around 4 mg/L at the inflow to 3.4-2.4 mg/L in the system effluent during the first 8 months of operation, and was further reduced to 1.2 mg/L during the subsequent 6 months of operation. Ammonium concentrations decreased only slightly from around 59 mg/L at the inflow to 56 mg/L in the outflow, indicating no significant nitrification during the first 14 months of continuous operation. Confocal laser scanning microscopy (CLSM) demonstrated that microorganisms rapidly colonized both the coconut fibre and polypropylene textiles. Microbial community structure analysis performed using denaturing gradient gel electrophoresis (DGGE) revealed little similarity between patterns from water and textile samples. Coconut textiles were shown to be more effective than polypropylene fibre textiles for promoting the recruitment and development of MTBE-degrading biofilms. Biofilms of both textiles contained high numbers of benzene metabolizing bacteria suggesting that these materials provide favourable growth conditions for benzene degrading microorganisms.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.watres.2009.12.002DOI Listing

Publication Analysis

Top Keywords

coconut fibre
12
polypropylene textiles
12
months operation
12
mg/l inflow
12
aerated treatment
8
treatment pond
8
mtbe ammonium
8
groundwater contaminants
8
fibre polypropylene
8
benzene loss
8

Similar Publications

Precise prediction of adsorption in a multicomponent system is vital for successful design of dye-contaminated industrial wastewater treatment processes. The present work looks for the reason behind the failure of the competitive Langmuir model (CLM) to describe adsorption in such systems, while the Langmuir model (LM) successfully describes the process for a single dye solution. With that end, derivations of LM and CLM have been revisited, and a criterion for the universality of active sites has been defined.

View Article and Find Full Text PDF

The present research incorporates five AI methods to enhance and forecast the characteristics of building envelopes. In this study, Response Surface Methodology (RSM), Support Vector Machine (SVM), Gradient Boosting (GB), Artificial Neural Networks (ANN), and Random Forest (RF) machine learning method for optimization and predicting the mechanical properties of natural fiber addition incorporated with construction and demolition waste (CDW) as replacement of Fine Aggregate in Paver blocks. In this study, factors considered were cement content, natural fine aggregate, CDW, and coconut fibre, while the resulting measure was the machinal properties of the paver blocks.

View Article and Find Full Text PDF
Article Synopsis
  • Prolamins found in wheat, barley, and rye are linked to health issues like celiac disease and wheat allergies, pushing the need for gluten-free alternatives like rice flour, though its products are not as high-tech.
  • Adding low-fat desiccated coconut flour and xanthan gum to rice flour significantly improves the quality and properties of gluten-free cakes, impacting viscosity, moisture, and texture.
  • The study successfully optimized a gluten-free cake recipe, achieving improved sensory qualities (taste, texture, etc.) through careful ratios of rice flour, coconut flour, and xanthan gum, validated by strong statistical models.
View Article and Find Full Text PDF

Coconut endosperm residue is a rich dietary fiber resource; however, its hydration properties are poor. To enhance the functionality and applications of coconut endosperm residue dietary fiber (CERDF) in the food industry, ultrasound, cellulase, and hemicellulase hydrolysis combined with carboxymethylation or phosphate crosslinking have been used. The impact of the modified CERDFs on egg white protein gel (EWPG) was also studied.

View Article and Find Full Text PDF

The use of environmentally friendly materials for industrial applications has increased tremendously in the past decades due to environmental concerns associated with using synthetic materials. The present comparative investigation studied the properties of raw and chemically-treated coconut shell biomass for possible polymeric composite applications. The coconut shell biomass was treated with alkali (NaOH), bleaching and combined NaOH-bleaching solutions and investigated the surface morphology, chemical transformations, and thermal stability.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!