Matched spectral filter based on reflection holograms for analyte identification.

Appl Opt

Department of Electrical Engineering, University of California at Santa Cruz, Santa Cruz, California 95064, USA.

Published: December 2009

A matched spectral filter set that provides automatic preliminary analyte identification is proposed and analyzed. Each matched spectral filter in the set containing the multiple spectral peaks corresponding to the Raman spectrum of a substance is capable of collecting the specified spectrum into the detector simultaneously. The filter set is implemented by multiplexed volume holographic reflection gratings. The fabrication of a matched spectral filter in an Fe:LiNbO(3) crystal is demonstrated to match the Raman spectrum of the sample Rhodamine 6G (R6G). An interference alignment method is proposed and used in the fabrication to ensure that the multiplexed gratings are in the same direction at a high angular accuracy of 0.0025 degrees . Diffused recording beams are used to control the bandwidth of the spectral peaks. The reflection spectrum of the filter is characterized using a modified Raman spectrometer. The result of the filter's reflection spectrum matches that of the sample R6G. A library of such matched spectral filters will facilitate a fast detection with a higher sensitivity and provide a capability for preliminary molecule identification.

Download full-text PDF

Source
http://dx.doi.org/10.1364/AO.48.006973DOI Listing

Publication Analysis

Top Keywords

matched spectral
20
spectral filter
16
filter set
12
analyte identification
8
spectral peaks
8
raman spectrum
8
reflection spectrum
8
filter
6
spectral
6
matched
5

Similar Publications

Wave mixing (WM) techniques are crucial for applications such as supercontinuum generation, frequency conversion, and high-dimensional quantum encoding. However, their efficiency is often limited by complex phase-matching requirements, and current insights into phase-matching mechanisms for high-order WM remain limited. To address this, compact optical path configurations with high-peak-power, synchronous, multicolor ultrafast laser sources are needed to enhance high-order wave-mixing efficiency.

View Article and Find Full Text PDF

Large energy single-frequency nanosecond (ns) near-infrared light source is an essential device in the field of the remote chemical analysis based on the laser-induced breakdown spectroscopy (LIBS). In this paper, a large energy single-frequency ns 824 nm light source with high repetition rate is presented, which is generated from a seed-injection locked optical parametric oscillator (OPO). By optimizing the spot radius of the pump laser and the mode-matching between the pump laser and signal light, the optical parametric generation (OPG) process is effectively eliminated.

View Article and Find Full Text PDF

A 2.6-fold spectral broadening of mid-infrared femtosecond µJ-level pulses has been achieved using an unfolded multi-pass configuration of germanium plates and zinc selenide lenses. This method maintains a throughput higher than 60% while preserving the spatial quality and the temporal duration of the input beam.

View Article and Find Full Text PDF

Previously we reported color matches measured in young adults using a newly developed multi-wavelength LED-based visual trichromator with which we estimated their individual L-, M- and S-cone spectral sensitivities. Here, we extend those measurements to include 70 additional observers aged between 8 to 80 years. As in our previous work, a series of color matching measurements were made to a reference white.

View Article and Find Full Text PDF

Recently, the dissipative soliton (DS) generation in the positive fourth-order-dispersion (FOD) fiber laser has been theoretically predicted, namely dissipative pure-quartic soliton (DPQS), featuring a higher energy-scaling ability compared to conventional DS dominated by positive group velocity dispersion. Here, we discover that the formation of spectral sidebands is always accompanying by the stabilized DPQS in the fiber laser, which is different from the conventional DS. Due to the combination of positive FOD and self-phase modulation, low- and high-frequency components are distributed at the leading and trailing edges of the pulse, forming the pedestals that propagate with it.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!