The growth behaviors and contact resistances of vertically aligned carbon nanotubes (CNTs) and carbon nanofibers (CNFs) grown on different underlayer metals are investigated. The average diameter, diameter distribution, density, growth rate and contact resistance exhibit strong correlation with the choice of catalyst/underlayer combination. These observations are analyzed in terms of interactions between the catalyst and the underlayer metal. The CNT via test structure has been designed and fabricated to make current-voltage measurements on single CNTs using a nanomanipulator under scanning electron microscopy (SEM) imaging. By analyzing the dependence of measured resistance on CNT diameter, the CNT-metal contact resistance can be extracted. The contact resistances between as-grown CNTs and different underlayer metals are determined. Relationships between contact resistances and various combinations of catalysts and underlayer metals are investigated.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1088/0957-4484/21/4/045201 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Multicolored Bifacial Perovskite Solar Cells through Top Electrode Engineering.
ACS Appl Mater Interfaces
January 2025
Department of Microelectronic Science and Engineering, Ningbo University, Ningbo 315000, China.
Power generation and architectural beauty are equally important for designing efficient and esthetically appealing bifacial perovskite solar cells (PSCs). In this work, efficient and multicolored p-i-n-structured PSCs are achieved by taking advantage of a dielectric/metal/dielectric (DMD)-type (MoO/Ni/Ag/MoO) transparent counter electrode. The MoO/Ni underlayer effectively promotes the formation of a continuous and conductive ultrathin Ag transparent film, especially the 1 nm Ni seed layer adjusts the interface energy level between perovskite/MoO and Ag, resulting in Ohmic contact of the electrode to promote charge extraction and collection.
View Article and Find Full Text PDFControl of Two Solid Electrolyte Interphases at the Negative Electrode of an Anode-Free All Solid-State Battery based on Argyrodite Electrolyte.
Adv Mater
January 2025
Materials Science and Engineering Program, Walker Department of Mechanical Engineering and Texas Materials Institute, The University of Texas at Austin, Austin, TX, 78712, USA.
Anode-free all solid-state batteries (AF-ASSBs) employ "empty" current collector with three active interfaces that determine electrochemical stability; lithium metal - Solid electrolyte (SE) interphase (SEI-1), lithium - current collector interface, and collector - SE interphase (SEI-2). Argyrodite LiPSCl (LPSCl) solid electrolyte (SE) displays SEI-2 containing copper sulfides, formed even at open circuit. Bilayer of 140 nm magnesium/30 nm tungsten (Mg/W-Cu) controls the three interfaces and allows for state-of-the-art electrochemical performance in half-cells and fullcells.
View Article and Find Full Text PDFDual back interface engineering optimized charge carrier dynamics in Sb(S,Se) photocathodes for efficient solar hydrogen production.
Chem Sci
December 2024
Shenzhen Key Laboratory of Advanced Thin Films and Applications, Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province, State Key Laboratory of Radio Frequency Heterogeneous Integration, College of Physics and Optoelectronic Engineering, Shenzhen University Shenzhen 518060 China
Antimony sulfoselenide (Sb(S,Se)) is a promising sunlight absorber material for solar energy conversion in photovoltaic (PV) cells and photoelectrochemical (PEC) photoelectrodes due to its excellent photoelectric properties. However, the obtained thin-film and back contact properties significantly influence the PEC performance of photocathodes, causing severe bulk recombination, carrier transport loss, and deteriorating half-cell solar-to-hydrogen (HC-STH) efficiency. This study introduces an intriguing dual back interface engineering strategy for Sb(S,Se) photocathodes by incorporating an intermediate MoO layer and a secondary carrier transport channel of Au to strengthen charge carrier dynamics.
View Article and Find Full Text PDFSuppressed Nonreciprocal Second-Harmonic Generation of Antiferromagnet MnPSe in the MnPSe/Graphene Heterostructure Due to Interfacial Magnon-Plasmon Coupling.
Nano Lett
November 2024
High Magnetic Field Laboratory, HFIPS, Chinese Academy of Sciences, Hefei 230031, P. R. China.
Interfacial coupling is one of the keys to manipulating magnetic/nonmagnetic two-dimensional (2D) heterostructures for novel functionalities. The MnPSe/graphene heterostructure is a prospective platform for quantum information and metrology. However, how graphene affects MnPSe through interfacial coupling is still poorly understood.
View Article and Find Full Text PDFGlutathione-Coated Gold Nanoparticles Enabling Bifunctional Therapy at the Buried Interface for Efficient and UV-Resistant Perovskite Solar Cells.
ACS Appl Mater Interfaces
August 2024
School of Materials Science and Engineering, China University of Petroleum (East China), Qingdao 266580, P. R. China.
Very recently, the poor contact between the perovskite and carrier selective layer has been regarded as a critical issue for improving the performance and stability of perovskite solar cells (PSCs). In this study, the buried interface of regularly structured PSCs has been targeted. Glutathione-coated gold nanoparticles (GSH-AuNPs) are used as double-sided passivating agents to improve the quality of the perovskite films.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!