This study determined the effect of bleaching agents on the fracture toughness of composite materials. Four nanofilled resin composites were evaluated: Filtek Supreme Plus, Tetric EvoCeram, Premise and Esthet-X. Four concentrations of bleaching agents were tested: Opalescence PF 10%, 20%, 35% and 45%. Fifty specimens of each composite conforming to ASTM guidelines for the single edge notch bar-shaped specimen were fabricated in a metal mold. The specimens were stored in artificial saliva at 37 degrees C for a minimum of 24 hours prior to exposing them to the bleaching agents. Ten specimens of each material were used as controls. Forty specimens of each brand were evenly divided into four groups for bleaching agent application (n = 10). The resin composites were bleached on both sides for 14 days. The specimens were then subjected to a three-point bending test with a crosshead speed of 0.2 mm per second. The fracture toughness (K(Ic)) was calculated. The control group K(Ic) value of Esthet-X was significantly higher than that of the other composites in the controlled groups. Bleaching agents significantly improved the fracture toughness values of Filtek Supreme Plus. The application of bleaching agents did not significantly change the fracture toughness values of the other nanofilled resin composites tested.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.2341/08-120-L | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Gingival Soft Tissue Integrative Zirconia Abutments with High Fracture Toughness and Low-Temperature Degradation Resistance.
Biomater Res
January 2025
Hospital of Stomatology, Sun Yat-Sen University, Guangzhou 510055, China.
Low fracture toughness, low-temperature degradation (LTD) susceptibility, and inadequate soft tissue integration greatly limit the application of zirconia ceramic abutment. Integrating the "surface" of hard all-ceramic materials into the gingival soft tissue and simultaneously promoting the "inner" LTD resistance and fracture toughness is challenging. Composite ceramics are effective in improving the comprehensive properties of materials.
View Article and Find Full Text PDFFracture resistances of heat-treated nickel-titanium files used for minimally invasive instrumentation.
BMC Oral Health
January 2025
Department of Conservative Dentistry, School of Dentistry, Dental Research Institute, Dental and Life Science Institute, Pusan National University, Yangsan, Korea.
Background: This study compared the torsional resistance, bending stiffness, and cyclic fatigue resistances of different heat-treated NiTi files for minimally invasive instrumentation.
Methods: TruNatomy (TN) and EndoRoad (ER) file systems were compared with ProTaper Gold (PG). Torsional load, distortion angle, and bending stiffness were assessed using a custom device AEndoS, and toughness was calculated using the torsional data.
Robust Mechanically Interlocked Network Ionogels.
Angew Chem Int Ed Engl
January 2025
Shanghai Jiao Tong University, School of Chemistry and Chemical Engineering, 800 Dongchuan Road, 200240, Shanghai, CHINA.
Ionogels have attracted considerable attention as versatile materials due to their unique ionic conductivity and thermal stability. However, relatively weak mechanical performance of many existing ionogels has hindered their broader application. Herein, we develop robust, tough, and impact-resistant mechanically interlocked network ionogels (IGMINs) by incorporating ion liquids with mechanical bonds that can dissipate energy while maintain structural stability.
View Article and Find Full Text PDFHigh-Modulus Homochiral Torsional Oxide Ceramic Artificial Muscles.
Adv Mater
January 2025
College of Textiles, Donghua University, Shanghai, 201620, China.
Fiber-based artificial muscles are soft actuators used to mimic the movement of human muscles. However, using high modulus oxide ceramics to fabricate artificial muscles with high energy and power is a challenge as they are prone to brittle fracture during torsion. Here, a ceramic metallization strategy is reported that solves the problem of low torsion and low ductility of alumina (AlO) ceramics by chemical plating a thin copper layer on alumina filaments.
View Article and Find Full Text PDFNanocomposites of Epoxy with FeO Featuring Dynamic Disulfide Bonds: Fracture Toughness, Reprocessing, and Functional Properties.
Langmuir
January 2025
College of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
Nanocomposites of epoxy with FeO featuring dynamic disulfide bonds were fabricated. To facilitate the dispersion of FeO nanoparticles, we synthesized poly(ε-caprolactone)-grafted FeO nanoparticles, which were then incorporated into epoxy to generate robust interfacial interactions between epoxy and the inorganic nanoparticles. Through this approach, a fine dispersion of the inorganic nanoparticles in the epoxy matrix was successfully obtained.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!