In clinics, the minimally invasive freezing therapy, commonly known as cryosurgery, has been increasingly used for the controlled destruction of tumor tissue. However, there are still many bottlenecks to impede the success of a cryosurgery. One of the most critical factors has been that insufficient or inappropriate freezing will not completely destroy the target tumor tissues, which as a result may lead to tumor regenesis and thus failure of treatment. In addition, the surrounding healthy tissues may suffer from serious freeze injury due to unavoidable release of a large amount of cold from the freezing probe. To resolve these challenges, we recently proposed a new strategy, termed as nano-cryosurgery, to improve freezing efficiency of the conventional cryosurgical procedure. The basic principle of this protocol is to deliver functional suspension of nanoparticles with favorable physical and/or chemical properties into the target tissues, which then serve as adjuvant or drug carrier either to maximize the freezing heat transfer process, regulate freezing scale, modify ice-ball formation orientation or prevent the surrounding healthy tissues from being frozen. In addition, introduction of nanoparticles during cryosurgery could also help better image the edge of a tumor as well as the margin of the iceball. The new therapy raised many critical fundamental as well as practical issues for solving. This review is dedicated to present a comprehensive review on multiscale fundamental phase change heat transfer issues thus involved. Attentions would span from micro-scale heat transfer in cellular scale to tissue level. Some related thermal physical effects of nanoparticles on the freezing process such as ice nucleation enhancement, water transport during freezing of a single cell will be discussed. Cryosurgical thermal management of using nanoparticles to modify thermal properties of the tissue-particle components, regulate the growth orientation and strength of an ice ball, enable a conformal tumor destruction in tissues with or without large blood vessels, etc. will be illustrated. Meanwhile, the fundamental issue for the transport of nanoparticle and its assisted drug delivery will be summarized. Theoretical modeling as well as experimental approaches for studying the micro/nano-scale heat transfer throughout the tissue or cell domain during nano-cryosurgery will be suggested. Some potential applications and possible challenges when nanotechnology meets cryosurgery will be outlined. The nano-cryosurgery is expected to help expand the boundary of the emerging frontier of nano-biomedical engineering.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1166/jnn.2009.1264 | DOI Listing |
Polymers (Basel)
January 2025
Department of Physics, Washington State University, Pullman, WA 99163, USA.
This work aims to determine the mechanism of the photomechanical response of poly(Methyl methacrylate) polymer doped with the photo-isomerizable dye Disperse Red 1 using the non-isomerizable dye Disperse Orange 11 as a control to isolate photoisomerization. Samples are free-standing thin films with thickness that is small compared with the optical skin depth to assure uniform illumination and photomechanical response throughout their volume, which differentiates these studies from most others. Polarization-dependent measurements of the photomechanical stress response are used to deconvolute the contributions of angular hole burning, molecular reorientation and photothermal heating.
View Article and Find Full Text PDFPolymers (Basel)
January 2025
Faculty of Mechanics, University Politehnica of Timisoara, Piata Victoriei 2, 300006 Timisoara, Romania.
This study investigated silicone composites with distributed boron nitride platelets and carbon microfibers that are oriented electrically. The process involved homogenizing and dispersing nano/microparticles in the liquid polymer, aligning the particles with DC and AC electric fields, and curing the composite with IR radiation to trap particles within chains. This innovative concept utilized two fields to align particles, improving the even distribution of carbon microfibers among BN in the chains.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
Institute of Electric Power Engineering, Czestochowa University of Technology, Armii Krajowej 17, 42-200 Czestochowa, Poland.
During the heat treatment of round steel bars, a heated charge in the form of a cylindrically formed bundle is placed in a furnace. This type of charge is a porous granular medium in which a complex heat flow occurs during heating. The following heat transfer mechanisms occur simultaneously in this medium: conduction in bars, conduction within the gas, thermal radiation between the surfaces of the bars, and contact conduction across the joints between the adjacent bars.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China.
C-UHTC is an ideal aerospace material because of its exceptional properties, but its machinability is facing great challenges. Electrical discharge machining (EDM) offers a potential solution, but its removal mechanism remains unclear, lacking reliable prediction tools to guide the actual production. This paper deeply explores the EDM removal mechanism of C-ZrB-SiC through single-pulse experiments, high-speed camera observations, and thermal-fluid coupling simulations, revealing key processes like heat transfer, phase transformation, molten pool dynamics, crater formation, and reinforcing phase effects.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
Department of Industrial Engineering, University of Salerno, 84084 Fisciano, SA, Italy.
This paper presents a comprehensive numerical investigation to simulate heat transfer and residual stress formation of Ti-6Al-4V alloy during the Laser Powder Bed Fusion process, using a finite element model (FEM). The FEM was developed with a focus on the effects of key process parameters, including laser scanning velocity, laser power, hatch space, and scanning pattern in single-layer scanning. The model was validated against experimental data, demonstrating good agreement in terms of temperature profiles and melt pool dimensions.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!