We have generated 1-20-GHz microwave pulses by illuminating an Fe-compensated InP wafer with 50-ps optical pulses at normal incidence. The process of the generation of microwave radiation was monitored and analyzed directly through a 40-GHz sampling oscilloscope with precision. The saturation properties, the waveform evolution, and the optical coupling efficiency of the gigahertz photoconducting antenna are discussed. The flexibility, compactness, and high-resolution features offered by this technique merit new applications for radar communication as well as for other microwave detecting devices.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/ol.20.001544 | DOI Listing |
Sensors (Basel)
November 2024
Department of Biomedical Engineering, Stony Brook University, Stony Brook, NY 11794, USA.
Recent advancements in novel fiber-coupled and portable terahertz (THz) spectroscopic imaging technology have accelerated applications in nondestructive testing (NDT). Although the polarization information of THz waves can play a critical role in material characterization, there are few demonstrations of polarization-resolved THz imaging as an NDT modality due to the deficiency of such polarimetric imaging devices. In this paper, we have inspected industrial carbon fiber composites using a portable and handheld imaging scanner in which the THz polarizations of two orthogonal channels are simultaneously captured by two photoconductive antennas.
View Article and Find Full Text PDFIn this paper, we report a three-dimensional synthetic aperture imaging method with pulsed terahertz waves realized by a terahertz time-domain spectrometer. In contrast to synthetic aperture imaging systems operating at microwave or millimeter-wave frequencies where the frequency of the transmitter is scanned in the frequency domain, in our imaging system, all the frequency components are contained in a single terahertz pulse that can be generated and detected by photoconductive antennas. The image algorithm was analyzed theoretically and confirmed numerically using the finite-difference time-domain method.
View Article and Find Full Text PDFEmitters based on photoconductive materials excited by ultrafast lasers are well-established and popular devices for THz generation. However, so far, these emitters - both photoconductive antennas and large area emitters - were mostly explored using driving lasers with moderate average powers (either fiber lasers with up to hundreds of milliwatts or Ti:Sapphire systems up to few watts). In this paper, we explore the use of high-power, MHz repetition rate Ytterbium (Yb) based oscillator for THz emission using a microstructured large-area photoconductive emitter, consist of semi-insulating GaAs with a 10 × 10 mm active area.
View Article and Find Full Text PDFACS Appl Mater Interfaces
October 2024
Department of Physics, Capital Normal University, Beijing 100048, China.
Advanced biosensors must exhibit high sensitivity, reliability, and convenience, making them suitable for detecting trace samples in biological or medical applications. Currently, biometric identification is the predominant method in clinical practice, but it is complex and time-consuming. In this study, we propose an optical metasurface utilizing the Fano resonance effect, which exhibits a sharp resonance with a transmittance of 32% at 0.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!