Purpose: To investigate the influence of different x-ray radiation doses on the bond strength of adhesive restorations to dentin using different bonding strategies.
Materials And Methods: Flat dentin surfaces on human molars were obtained and cylinder-shaped specimens for the microshear bond test were built up with a composite (Z250, 3M ESPE), using three adhesive systems: a two-step etch-and-rinse (Single Bond 2--SB2, 3M ESPE), a two-step self-etching (Clearfil SE Bond--CSE, Kuraray), or a single-step self-etching (Adper Prompt--ADP, 3M ESPE). The specimens were assigned to 4 groups (n = 10), according to the x-ray dose: 0 (control), 5, 35, or 70 Gy. Radiation was directed to the surface of the resin cylinders. Microshear testing was conducted after 24 h, and the failure modes classified under magnification (200X). Data were submitted to two-way ANOVA and Holm-Sidak's test (p < or = 0.05). A nonlinear regression analysis was carried out with bond strength as dependent variable.
Results: Bond strength results were dose and material dependent. SB2: control > 5 = 35 > 70; CSE: control = 5 > 35 = 70; ADP: control = 5 = 35 = 70. Generally, SB2 > CSE > ADP. The nonlinear regression plots showed that in general, an increase in radiation dose may predict a decrease in bond strength (R2 > or = 0.905). Failure modes were dependent on the bonding system, generally with no significant influence of radiation.
Conclusion: X-ray radiation might present a dose-dependent detrimental effect on the bond strength of resin composite restorations to dentin.
Download full-text PDF |
Source |
---|
BMC Oral Health
January 2025
Conservative Dentistry Department, Faculty of Oral and Dental Medicine, Future University, Cairo, Egypt.
Background: This study aimed to assess the influence of different pretreatment protocols and antioxidants application on the shear bond strength (SBS) of universal adhesive to sound (SoD) and caries-induced dentin (CID).
Methods: One hundred and twenty posterior teeth had their occlusal enamel removed, then the specimens were divided into two main groups according to dentin substrates; SoD and CID, three subgroups according to pretreatments protocols control (no pretreatment), NaOCl-treated, and Er, Cr:YSGG-treated and two divisions according to antioxidant application (with and without sodium ascorbate (SA) application). All-Bond Universal (ABU) universal adhesives was applied in self-etch (SE) mode then resin composite discs were built.
Environ Sci Technol
January 2025
State Key Laboratory of Environmental Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Guiyang 550081, PR China.
Cadmium (Cd) isotopes have recently emerged as novel tracers of Cd sources and geochemical processes. Widespread clay minerals play a key role in Cd migration due to their strong adsorption capacity, but the mechanism of Cd isotope fractionation during adsorption onto clay minerals is poorly understood. Here, we experimentally investigated the adsorption mechanisms of Cd on montmorillonite (2:1) and kaolinite (1:1) by using extended X-ray absorption fine structure (EXAFS) spectroscopy.
View Article and Find Full Text PDFSci Rep
January 2025
State Key Laboratory of Structure Analysis, Optimization and CAE Software for Industrial Equipment, Department of Engineering Mechanics, Dalian University of Technology, Dalian, 116024, China.
The biocompatible autonomous self-healing hydrogels have great potential in biomedical applications. However, the fairly weak tensile strength of the hydrogels seriously hinders their application. Here, we introduced chitosan (CS) into the polyvinyl alcohol (PVA)-tannic acid (TA) hydrogel and investigated the effects of the CS content, as CS can not only form reversible H bonds with PVA and TA but also form reversible electrostatic interactions with TA.
View Article and Find Full Text PDFNat Commun
January 2025
Key Laboratory of Automobile Materials, Ministry of Education, Department of Materials Science and Engineering, Jilin University, 130022, Changchun, China.
Correlating the bond strength with the macro strength of metals is crucial for understanding mechanical properties and designing multi-principal-element alloys (MPEAs). Motivated by the role of grain boundaries in the strength of metals, we introduce a predictive model to determine the grain-boundary energies and strength of metals from the cohesive energy and atomic radius. This scheme originates from the d-band characteristics and broken-bond spirit of tight-binding models, and demonstrates that the repulsive/attractive effects play different roles in the variation of bond strength for different metals.
View Article and Find Full Text PDFJ Dent
January 2025
DDS, MS, PhD, Department of Dentistry, Federal University of Rio Grande do Norte, Natal, Brazil. Electronic address:
Objective: To evaluate the influence of different cleaning methods, surface treatments, and aging on the repair bond strength to a CAD/CAM glass-ceramic.
Materials And Methods: Forty-eight lithium disilicate CAD/CAM ceramic blocks were fabricated, sintered, and embedded in acrylic resin. After contamination with human saliva, they were divided according to the factors "Cleaning method" (Control-water/air spray, Air-particle abrasion with AlO, Ivoclean cleaning paste), "Surface treatment" (5% Hydrofluoric acid-HF + Silane, Monobond Etch & Prime-MEP), and "Aging" (thermocycling, no thermocycling).
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!