A 24 W liquid-cooled CW 3 microm fiber laser with a multimode-core Er-doped ZBLAN fiber has been developed. The output power of 24 W and an optical-to-optical efficiency of 14.5% (with respect to incident pump power) were obtained with 975 nm diode pumping. Efficient cooling was implemented by a combination of fluid cooling over the entire length of the fiber and conductive cooling at both end faces of the fiber. Consequently, stable high-power operation was demonstrated. To our knowledge, this is the highest output power obtained by a 3 microm fiber laser. Furthermore, the high power can be further scaled up, since the output power in the present work is limited only by the available pump power.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OL.34.003062 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Introduction: Laser ablation using a 980-nm wavelength diode laser, which is a new-generation laser, for recurrent bladder cancer is known to have a lower incidence of complications and recurrence than conventional transurethral resection of bladder tumor surgery. This is the first study to report the use of 980-nm diode laser ablation for recurrent non-muscle-invasive bladder cancer in Japan.
Case Presentation: A 73-year-old man underwent transurethral laser ablation for the treatment of recurrent non-muscle-invasive bladder cancer.
High-speed FSO-5G wireless communication system with enhanced loss compensation using high-power EDFA.
Sci Rep
January 2025
Institute of Electro-Optical Engineering, National Taipei University of Technology, Taipei, 10608, Taiwan.
In this paper, we demonstrated a novel bidirectional high-speed transmission system integrating a free-space optical (FSO) communication with a 5G wireless link, utilizing a high-power erbium-doped fibre amplifier (EDFA) for enhanced loss compensation. The system supports downlink rates of 1-Gb/s/4.5-GHz and 10-Gb/s at 24-GHz and 39-GHz, and an uplink rate of 10-Gb/s/28-GHz.
View Article and Find Full Text PDFAll-electrical recursive generation and time-domain mode division multiplexing of Hermite-Gaussian pulses for optical, THz and RF links.
Sci Rep
January 2025
THz-Photonics Group, Institut für Hochfrequenztechnik, Technische Universität Braunschweig, 38106, Braunschweig, Germany.
Space division multiplexing (SDM) with Hermite Gaussian (HG) modes, for instance, can significantly boost the transmission link capacity. However, SDM is not suitable in existing single mode fiber networks, and in long-distance wireless, microwave, THz or optical links, the far-field beam distribution may present a problem. Recently it has been demonstrated, that time domain HG modes can be employed to enhance the link capacity.
View Article and Find Full Text PDFEstrogen-regulated lateral septal kisspeptin neurons abundantly project to GnRH neurons and the hypothalamic supramammillary nucleus.
J Neurosci
January 2025
Laboratory of Reproductive Neurobiology, Hun-Ren Institute of Experimental Medicine, Budapest, 1083 Hungary;
While hypothalamic kisspeptin (KP) neurons play well-established roles in the estrogen-dependent regulation of reproduction, little is known about extrahypothalamic KP-producing (KP) neurons of the lateral septum. As established previously, expression in this region is low and regulated by estrogen receptor- and GABA receptor-dependent mechanisms. Our present experiments on knock-in mice revealed that transgene expression in the LS begins at P33-36 in females and P40-45 in males and is stimulated by estrogen receptor signaling.
View Article and Find Full Text PDFMeasurement and characterization of internal delamination defects in CFRP based on line laser thermography frequency domain analysis.
Rev Sci Instrum
January 2025
School of Electrical and Electronic Engineering, The University of Manchester, Manchester M13 9PL, United Kingdom.
Carbon fiber reinforced polymers (CFRPs) are widely used in fields such as aviation and aerospace. However, subtle defects can significantly impact the material's service life, making defect detection a critical priority. In this paper, delamination defects in CFRP are detected using line laser infrared thermography, and a defect characterization algorithm that combines differential thermography with a frequency-domain filter is proposed.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!