Experiments were carried out to evaluate the batch adsorption of COD from petroleum refinery wastewater on a locally prepared date-pit activated carbon (DP-AC), and its adsorption effectiveness was compared to that of commercially available BDH activated carbon (BDH-AC). Adsorption equilibrium and kinetic data were determined for both adsorbents and fitted to several adsorption isotherm and kinetics models, respectively. The Langmuir monolayer isotherm fitted well the equilibrium data of COD on both adsorbents; whereas, the kinetics data were best fitted by the pseudo-second order model. Modeling of the controlling mechanisms indicated that both intrinsic kinetics and mass transfer contributed to controlling the adsorption process. Mass transfer seemed to be the dominant mechanism at low COD content, while intrinsic kinetics dominates at high concentrations. In general, the adsorption effectiveness of locally prepared DP-AC was proven to be comparable to that of BDH-AC. Therefore, DP-AC can be utilized as an effective and less expensive adsorbent for the reduction of COD in refinery wastewater.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.jhazmat.2009.09.002 | DOI Listing |
BMC Microbiol
January 2025
Unidad de Manipulación Genética, Facultad de Ciencias Biológicas, Departamento de Microbiología e Inmunología, Universidad Autónoma de Nuevo León, Monterrey, Nuevo León, México.
Background: Plastic pollution is a significant environmental problem caused by its high resistance to degradation. One potential solution is polyhydroxybutyrate (PHB), a microbial biodegradable polymer. Mexico has great uncovered microbial diversity with high potential for biotechnological applications.
View Article and Find Full Text PDFEnviron Sci Pollut Res Int
January 2025
Department of Chemical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran, 15875-4413, Iran.
This study presents a novel, eco-friendly method for removing methyldiethanolamine (MDEA) from wastewater, addressing its environmental impact and elevated chemical oxygen demand (COD) from gas refineries. We employed two wetland plants, Phragmites australis and Typha latifolia, utilizing a hydroponics approach to assess MDEA removal efficiency. Wastewater samples from the Ilam gas refinery in Iran were tested at varying initial concentrations (50 to 1600 ppm) over three consecutive 7-day periods, with a 1-day rest interval.
View Article and Find Full Text PDFWater Res
December 2024
Instituto de Energías Renovables, Universidad Nacional Autónoma de México (IER-UNAM). Priv. Xochicalco S/N, Col. Centro, Temixco, Morelos, 62580, Mexico.
The Electro-Fenton process (EF) has been conventionally applied to efficiently degrade refractory and/or toxic pollutants. However, in this work, EF was used as a reverse engineering tool to selectively synthesize highly value-added products (oxalic or oxamic acid) through the degradation of the model pollutant acetaminophen, a widely used analgesic and antipyretic drug. It was found that the production of either oxalic or oxamic acid is dictated by the applied current density.
View Article and Find Full Text PDFJ Environ Manage
January 2025
Environmental Engineering Group, Department of Civil Engineering, Indian Institute of Technology Roorkee, Roorkee, Uttarakhand, 247667, India.
Simultaneous biological nutrient removal (SBNR) using an anaerobic-anoxic-oxic phase is the key feature of advanced wastewater treatment plants (WWTPs). Removing ammonia, total nitrogen, and phosphorus concurrently with organic matter and suspended solids from wastewater is essential to meeting stringent effluent discharge standards via SBNR in WWTPs. More insight into the mechanisms of SBNR, i.
View Article and Find Full Text PDFHeliyon
December 2024
Department of Medical Nanotechnology, School of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran, Iran.
This study aimed to assess nano-pumice (NP) from pumice mining waste as a local, cost-effective anode catalyst in microbial fuel cells (MFCs) for treating edible vegetable oil refinery wastewater (EVORW) and generating bioenergy. Pumice mining waste was converted into nano in three stages: crushing up to ≤3 cm, reducing the size of the previous step particles to 150 μm and converting the previous step particles to <100 nm. Nano-pumice prepared was coated on the carbon cloth (CC) to increase anode surface area of MFC.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!