To estimate the influence of gravel mesh (fine and coarse) and vegetation (Phragmites and Arundo) on the efficiency of a reed bed, a pilot plant was included after the wastewater treatment plant of a cosmetic industry treatment system according to a 22 factorial experimental design. The maximum biochemical oxygen demand (BOD5), chemical oxygen demand (COD) and total phosphorous (TP) reduction was observed in the reactor, where Phragmites and fine gravel were used. In the reactor with Phragmites and coarse gravel, the maximum total Kjeldahl nitrogen (TKN) and total suspended solids (TSS) reduction was observed. The maximum total solids reduction was measured in the reed bed, which was filled with Arundo and coarse gravel. Conclusively, the treatment of a cosmetic industry's wastewater by reed beds as a tertiary treatment method is quite effective.

Download full-text PDF

Source
http://dx.doi.org/10.1080/10934520902928669DOI Listing

Publication Analysis

Top Keywords

gravel mesh
8
tertiary treatment
8
reed bed
8
oxygen demand
8
reduction observed
8
reactor phragmites
8
coarse gravel
8
maximum total
8
gravel
5
treatment
5

Similar Publications

[Identification of Soil Heavy Metal Sources Around a Copper-silver Mining Area in Ningxia Based on GIS].

Huan Jing Ke Xue

November 2022

Huai'an National New & High-Tech Industry Development Zone, Huai'an 223300, China.

Article Synopsis
  • The study focused on the Yaoxianzi ditch in western China's arid region, collecting 194 topsoil samples to analyze heavy metal contamination.
  • Heavy metals like Ni, Cu, and Pb were assessed using ICP-MS, revealing that Hg, Ag, Cd, and Pb levels exceeded background values by significant margins, indicating human impact.
  • The pollution sources were identified as mining (32%) and industrial activities (40.3%), with contaminated areas primarily located near mining sites and certain agricultural regions.
View Article and Find Full Text PDF

Olive oil extraction produces a great volume of olive mill wastewater (OMW), which is considered a serious ecological challenge. In this study, we have designed and tested a trickling filter consisting of seven different layers of natural material, including (coarse gravel, fine gravel, lime (Ca (OH)), sand (SiO), carbon char, sponge/mesh), to treat OMW. The filter process involved physical separation, filtration, coagulation and adsorption with the removal of COD (69.

View Article and Find Full Text PDF

Scanning electron microscopy (SEM) has been frequently used for size and shape measurements of particles. SEM images offer two-dimensional (2D) information about a particle's lateral dimensions. Unfortunately, information about the particle's three-dimensional (3D) size and shape remains unavailable.

View Article and Find Full Text PDF

Passive personal air sampling of dust in a working environment-A pilot study.

J Occup Environ Hyg

October 2019

Occupational and Environmental Medicine, Department of Public Health and Clinical Medicine, Umeå University, Umeå , Sweden.

Article Synopsis
  • The study evaluated the University of North Carolina passive aerosol sampler for measuring airborne particles in an open-pit mine, comparing it with a respirable cyclone filter.
  • Microscopic analysis revealed the particles collected were mineral in origin, mostly shaped like gravel, with a particle size peak at about 3 µm, consistent with previous findings from the same location.
  • However, the UNC sampler significantly overestimated particle mass concentrations (about 30 times higher) compared to the respirable cyclone, suggesting the need for improvements in its design and positioning.
View Article and Find Full Text PDF

Contaminants removal and bacterial activity enhancement along the flow path of constructed wetland microbial fuel cells.

Sci Total Environ

February 2019

GEMMA - Environmental Engineering and Microbiology Research Group, Department of Civil and Environmental Engineering, Universitat Politècnica de Catalunya·BarcelonaTech, c/ Jordi Girona 1-3, Building D1, E-08034 Barcelona, Spain. Electronic address:

Microbial fuel cells implemented in constructed wetlands (CW-MFCs), albeit a relatively new technology still under study, have shown to improve treatment efficiency of urban wastewater. So far the vast majority of CW-MFC systems investigated were designed as lab-scale systems working under rather unrealistic hydraulic conditions using synthetic wastewater. The main objective of this work was to quantify CW-MFCs performance operated under different conditions in a more realistic setup using meso-scale systems with horizontal flow fed with real urban wastewater.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!