The adsorption of Cr(III) by two different coal varieties from Lakhra and Thar coalfields (Pakistan) have been studied in batch mode. The effect of adsorbent dose, pH, contact time and agitation speed on the adsorption of Cr(III) by both the coals were investigated. Adsorption equilibrium was achieved in 40-50 min. The Langmuir, Freundlich and Temkin adsorption isotherms were used to elucidate the observed sorption phenomena. The maximum Cr(III) removal was 2.61 mg of Cr(III) per gram of LC (Lakhra coal) and 2.55 mg of Cr(III) per gram of TC (Thar coal) as evaluated from Langmuir isotherm. The heat of sorption was in the range 3.75-3.87 kJ/mol as evaluated from Temkin isotherm. Best results were obtained at pH>5. It is proposed that low rank coals of Pakistan can be used for removal of toxic metals like Cr(III) from industrial effluents/waste waters.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jhazmat.2009.06.076DOI Listing

Publication Analysis

Top Keywords

adsorption criii
8
criii gram
8
criii
6
removal chromium
4
chromium iii
4
coal
4
iii coal
4
coal adsorbent
4
adsorption
4
adsorbent adsorption
4

Similar Publications

Environmental concerns are driving the development of eco-friendly and effective methods for contaminant monitoring and remediation. In this study, a lanthanide porphyrin-based MOF with dual fluorescence sensing and photocatalytic properties was synthesized and applied for the detection and combined removal of Cr(VI) and ciprofloxacin (CIP). Using different excitation wavelengths, the material exhibited selective detection of Cr(VI) via fluorescence quenching and CIP through fluorescence enhancement.

View Article and Find Full Text PDF

The wastewater from various industries contaminated with heavy metals poses significant environmental challenges. Biosorption has emerged as a widely used method for removing heavy metals from industrial wastewater. Pseudomonas atacamensis M7D1 is known to produce polysaccharides, but the potential of its polysaccharides as an adsorbent for heavy metal removal still needs to be explored.

View Article and Find Full Text PDF

There is limited research on the influence of environmental variables on the interactions of biodegradable microplastics with chromium. This study reports the results of adsorption experiments with Cr and poly(lactic acid) (PLA) in synthetic aqueous solutions. It addresses the influence of the initial oxidation state, Cr(III) or Cr(VI), the effects of UV irradiation and the presence of organic matter.

View Article and Find Full Text PDF

Understanding the geochemical mechanisms governing hexavalent chromium (Cr(VI)) in groundwater is essential for mitigating health risks. However, the processes driving Cr(VI) accumulation and migration in loess regions remain insufficiently understood. This study investigated the occurrence, release, and migration mechanisms of Cr(VI) across different groundwater environmental units (GEUs) in the south-central Loess Plateau, China.

View Article and Find Full Text PDF
Article Synopsis
  • Industrial wastewater contains toxic metals, and in this study, citric acid-modified MOF-808 was developed for effectively removing Cr(III) and Cr(III)-EDTA.
  • MOF-808-CA demonstrated strong adsorption capabilities with specific adsorptions of 40.46 mg/g for Cr(III) and 17.03 mg/g for Cr(III)-EDTA at pH 4.0.
  • The adsorption mechanisms involved both electrostatic interactions and surface complexation for Cr(III), while hydrogen bonding and complexation played key roles for Cr(III)-EDTA, highlighting MOF-808-CA's potential in treating contaminated wastewater.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!