Photolytic removal and mineralisation of 2-halogenated pyridines.

Water Res

Chemical Engineering, IPSE, School of Process Environmental and Materials Engineering, University of Leeds, Leeds LS2 9JT, UK.

Published: September 2009

The photolytic destruction and mineralisation of 2-halogenated pyridines (2-HalPYs) was studied in a range of conditions by means of ultraviolet irradiation at 254 nm. In all cases pseudo-first order kinetics satisfactorily describe the degradation process. Key decomposition products were identified and primary reaction pathways are proposed. 2-HalPYs were rapidly dehalogenated with a subsequent sharp pH drop. Complete Total Organic Carbon (TOC) removal was achieved. Their photolytic removal rate is not affected by pH or aeration. The fastest TOC removal was observed in 2-fluoropyridine (2-FPY) photolysis. 2-Hydroxypyridine (2-HPY) was identified as the primary intermediate formed by destruction of 2-chloropyridine (2-CPY), 2-bromopyridine (2-BPY) and 2-iodopyridine (2-IPY). 2-HPY is further destructed to form Dewar pyridinone. 2-FPY only marginally reacted to form 2-HPY. Instead, its major intermediate product is Dewar pyridinone. 2-IPY results in a, most likely aliphatic, photostable product, the production of which appears to increase at low pH and high 2-HPY concentration.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.watres.2009.06.018DOI Listing

Publication Analysis

Top Keywords

photolytic removal
8
mineralisation 2-halogenated
8
2-halogenated pyridines
8
identified primary
8
toc removal
8
dewar pyridinone
8
removal mineralisation
4
pyridines photolytic
4
photolytic destruction
4
destruction mineralisation
4

Similar Publications

Polyaniline-ZnTi-LDH heterostructure with d-π coupling for enhanced photocatalysis of pollutant removal.

J Colloid Interface Sci

January 2025

School of Chemistry and Chemical Engineering, Central South University, Changsha 410083, Hunan, China. Electronic address:

Heterointerface engineering is an effective strategy to design and construct high-performance photocatalysts. Herein, polyaniline (PANI) nanoparticles and ZnTi layered double hydroxide (ZnTi-LDH) nanosheets were integrated to form organic-inorganic heterostructure (PANI/LDH) via d-π electronic coupling using in-situ polymerization for photocatalytic oxidation/reduction towards tetracycline (TC) and Cr(VI). The photocatalytic activity was closely related to feed amount of aniline (Ani) in the polymerization process, which the abundant PANI nanoparticles were evenly distributed on the surface of ZnTi-LDH nanosheets at the proper Ani feed amount, and thus reinforced d-π electronic coupling at the organic-inorganic interfaces more efficiently.

View Article and Find Full Text PDF

Overlooked Generation of Reactive Oxidative Species from Water and Dioxygen by Far UV Light.

Environ Sci Technol

December 2024

Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology, School of Environmental Science and Engineering, Sun Yat-Sen University, Guangzhou 510275, P. R. China.

Article Synopsis
  • Far UV light at 222 nm is becoming popular for water purification through UV irradiation and advanced oxidation processes (AOPs), mainly removing pollutants via direct photolysis.
  • The study highlights the role of reactive oxidative species (ROS) generated from dioxygen and water under UV radiation, with hydroxyl radical (HO) identified as the key player in degrading organic micropollutants.
  • The research shows that UV treatment is more effective in removing 18 micropollutants than traditional UV/HO AOP methods, while also being more energy-efficient, proposing a new approach to UV-based water purification.
View Article and Find Full Text PDF

Multistep Removal System of Gaseous Toluene: Adsorption, Electrochemical, and Photolytic Treatments.

Chempluschem

December 2024

Centro de Investigación y Desarrollo Tecnológico en Electroquímica, S. C. (CIDETEQ)., Parque Tecnológico Querétaro s/n, San Fandila, 76730, Pedro Escobedo, Querétaro, México.

A large amount of atmospheric emissions result from various anthropogenic activities worldwide. Given the complexity of volatile organic compounds (VOCs) and their different adsorption capacities, redox potentials, and photolytic properties, an air purification system for the removal of VOCs that combines multiple physical processes was proposed in this study using toluene as an example. These processes include, in the first step, an adsorption treatment (AT) with activated carbon (AC), where toluene adsorption results from the insertion of aromatic rings (nonpolar groups) between the graphitic carbon planes, as demonstrated by the Raman spectroscopy; in the second step, electrochemical treatment (ECT) using TiO|Ti||SS-304 electrodes applying an electric field to accelerate the oxidation of toluene through the production of free radicals (⋅OH), hydroperoxyl radicals and benzyl groups, followed by the rupture of aromatic rings to generate aliphatic compounds and the consequent mineralization to CO, CO, and HO; in the third step, photolytic treatment (PT) with a 254-nm UV lamp for toluene degradation is used, which is influenced by the addition of radicals, such as ⋅OH or ⋅O , to transform toluene into either benzene or phenol.

View Article and Find Full Text PDF

Gamma-irradiated copper-based metal organic framework nanocomposites for photocatalytic degradation of water pollutants and disinfection of some pathogenic bacteria and fungi.

BMC Microbiol

November 2024

Chemistry of Natural and Microbial Products Department, Pharmaceutical and Drug Industries Research Institute, National Research Centre, 33 El Buhouth St, Dokki, 12622, Giza, Egypt.

Background: Although there are many uses for metal-organic framework (MOF) based nanocomposites, research shows that these materials have received a lot of interest in the field of water treatment, namely in the photodegradation of water contaminants, and disinfection of some pathogenic bacteria and fungi. This is brought on by excessive water pollution, a lack of available water, low-quality drinking water, and the emergence of persistent micro-pollutants in water bodies. Photocatalytic methods may be used to remove most water contaminants, and pathogenic microbes, and MOF is an excellent modifying and supporting material for photocatalytic degradation.

View Article and Find Full Text PDF

Roles of direct and indirect photodegradation in the photochemical fates of three 3rd generation fluoroquinolones.

J Hazard Mater

December 2024

School of Energy and Environment and State Key Laboratory of Marine Pollution, City University of Hong Kong, Hong Kong. Electronic address:

Article Synopsis
  • Fluoroquinolones (FQs), specifically moxifloxacin (MOX), gatifloxacin (GAT), and sparfloxacin (SPAR), are common antibiotics found in water, but their breakdown and potential toxicity are not fully understood.
  • *The study examined how these FQs degrade when exposed to light, finding that their degradation rates vary with pH levels and their chemical forms, with MOX showing the fastest breakdown.
  • *The breakdown products of these antibiotics may be ecotoxic, indicating that while photodegradation helps remove FQs from water, it could also generate harmful substances for aquatic life.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!