A hybrid AlGaInAs-silicon evanescent waveguide photodetector.

Opt Express

University of California, Santa Barbara, Department of Electrical and Computer Engineering, Santa Barbara, CA 93106, USA.

Published: May 2007

We report a waveguide photodetector utilizing a hybrid waveguide structure consisting of AlGaInAs quantum wells bonded to a silicon waveguide. The light in the hybrid waveguide is absorbed by the AlGaInAs quantum wells under reverse bias. The photodetector has a fiber coupled responsivity of 0.31 A/W with an internal quantum efficiency of 90 % over the 1.5 mum wavelength range. This photodetector structure can be integrated with silicon evanescent lasers for power monitors or integrated with silicon evanescent amplifiers for preamplified receivers.

Download full-text PDF

Source
http://dx.doi.org/10.1364/oe.15.006044DOI Listing

Publication Analysis

Top Keywords

waveguide photodetector
8
hybrid waveguide
8
algainas quantum
8
quantum wells
8
integrated silicon
8
silicon evanescent
8
waveguide
5
hybrid algainas-silicon
4
algainas-silicon evanescent
4
evanescent waveguide
4

Similar Publications

MoTe Photodetector for Integrated Lithium Niobate Photonics.

Nanomaterials (Basel)

January 2025

State Key Laboratory of High Field Laser Physics and CAS Center for Excellence in Ultra-Intense Laser Science, Shanghai Institute of Optics and Fine Mechanics (SIOM), Chinese Academy of Sciences (CAS), Shanghai 201800, China.

The integration of a photodetector that converts optical signals into electrical signals is essential for scalable integrated lithium niobate photonics. Two-dimensional materials provide a potential high-efficiency on-chip detection capability. Here, we demonstrate an efficient on-chip photodetector based on a few layers of MoTe on a thin film lithium niobate waveguide and integrate it with a microresonator operating in an optical telecommunication band.

View Article and Find Full Text PDF

This study reports the experimental demonstration of the first waveguide-integrated SiGe modulator using a PIN diode operating in a wide spectral range of the mid-infrared region. At the wavelength of 10 µm, an extinction ratio up to 10 dB is obtained in injection regime and 3.2 dB in depletion regime.

View Article and Find Full Text PDF

This work presents two circuit-based solutions to enhance the power handling capabilities of waveguide-integrated uni-travelling carrier photodetectors (WG-UTC-PDs). Compared to a baseline WG-UTC-PD, these solutions achieve a fivefold increase in photocurrent before thermal breakdown. First, dual-injection improves the optical power distribution within a baseline WG-UTC-PD, raising the photocurrent threshold before thermal breakdown.

View Article and Find Full Text PDF
Article Synopsis
  • The study introduces a method to improve near-infrared (NIR) sensitivity and response speed in surface-normal photodetectors by using surface plasmon (SP) modes coupled with waveguide (WG) modes.
  • The absorption efficiency in a 300 nm thick InGaAs layer was increased to 51.4% at 1550 nm by optimizing the interaction between SP and WG modes, while a thinner absorption layer led to faster response times.
  • This technique also facilitates polarization selectivity, enabling more efficient multiplexing of signal channels, which could enhance data capacity in future optical communication systems.
View Article and Find Full Text PDF

A high-speed infrared tellurium photodetector on a silicon nitride platform.

Nanoscale

December 2024

Department of Electronic Engineering, The Chinese University of Hong Kong, Shatin, New Territories, Hong Kong SAR, People's Republic of China.

The hybrid integration of two-dimensional (2D) materials on various photonic integration platforms has attracted widespread research interest because of the new functionalities enabled by the 2D materials for applications in photodetection, optical modulation and nonlinear optical signal processing. Tellurium is known to have high mobility, and quasi-2D tellurium is stable in air and has a small bandgap that may make it suitable for platform-independent scalable integration of high-performance photodetectors in the infrared band. In this work, we propose and implement a new structure for integrating tellurium with silicon nitride (SiN) waveguides, adding photodetector capability to an otherwise passive waveguide platform.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!