AI Article Synopsis
Article Abstract
Polymerization contraction of composite resin luting materials is known to produce high stresses in the interfaces being cemented that are described as perpendicular to them. This study describes the effect of shearing strains of curing luting materials on microtensile bond strength (microTBS) of interfaces. A flat surface of labial dentin of bovine incisors was exposed and teeth randomly assigned to A (n = 12) or B (n = 6) groups. Adoro rectangular (2 x 3 x 11 mm) restorative composite resin blocks were cemented (Excite DSC + Variolink II) completely (group A) or partially (group B, only on extremes and center) occupying luting space. After visible light curing, stick compound bars were sectioned perpendicular to interface and submitted to tension until detachment. microTBS decreased from the center to the extremes in group A (Spearman tests p < 0.0008) and not in group B, where microTBS was higher in extremes than in correspondent locations in group A and equivalent to that in group A in the central location. Weibull's analysis showed that m modulus and characteristic stresses also decreased from the center to periphery of restorations in group A. Mechanical resistance of bonded interface of a luting material and dentin decreases peripherally, and this reduction is caused by polymerization contraction.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1007/s00784-009-0284-2 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A comparative study of human amniotic membrane, tilapia skin collagen, and Centella asiatica derived gel to treat burn wound in rat model.
Cell Tissue Bank
January 2025
Institute of Tissue Banking and Biomaterial Research, Atomic Energy Research Establishment (AERE), Savar, Dhaka, 1349, Bangladesh.
In the quest for an ideal wound healing material, human amniotic membrane (AM), tilapia skin collagen (TSC), and Centella asiatica (CA) have been studied separately for their healing potential. In this study, we formulated AM, TSC, and CA gel and studied their competency and wound healing efficacy in vivo. Gel was formulated using AM, TSC, CA, Carbopol 934, acrylic acid, glycerine, and triethanolamine and physicochemical properties e.
View Article and Find Full Text PDFExploiting photopolymerization to modulate liquid crystalline network actuation.
Soft Matter
January 2025
LENS (European Laboratory for Non-Linear Spectroscopy) Via Nello Carrara 1, 50019 Sesto Fiorentino (FI), Italy.
Liquid Crystalline Networks (LCNs) are widely investigated to develop actuators, from soft robots to artificial muscles. Indeed, they can produce forces and movements in response to a plethora of external stimuli, showing kinetics up to the millisecond time-scale. One of the most explored preparation technique involves the photopolymerization of an aligned layer of reactive mesogens.
View Article and Find Full Text PDFTubulin Acetylation Enhances Microtubule Stability in Trabecular Meshwork Cells Under Mechanical Stress.
Invest Ophthalmol Vis Sci
January 2025
Department of Ophthalmology, Duke Eye Center, Duke University, Durham, North Carolina, United States.
Purpose: To study the roles of tubulin acetylation and cyclic mechanical stretch (CMS) in trabecular meshwork (TM) cells and their impact on outflow pathway physiology and pathology.
Methods: Primary TM cell cultures were subjected to CMS (8% elongation, 24 hours), and acetylated α-tubulin at lysine 40 (Ac-TUBA4) was assessed by western blotting and immunofluorescence. Enzymes regulating tubulin acetylation were identified via siRNA-mediated knockdowns of ATAT1, HDAC6, and SIRT2.
PEDOT/Polypyrrole Core-Sheath Fibers for Use as Conducting Polymer Artificial Muscles.
ACS Appl Mater Interfaces
January 2025
Sensor and Actuator Systems, Department of Physics, Chemistry and Biology (IFM), Linköping University, Linköping SE-581 83, Sweden.
Electropolymerized polypyrrole (PPy) is considered as one of the promising polymers for use in ionic-electroactive or conducting polymer (CP) actuators. Its electromechanical properties surpass those of other prominent CPs such as poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT/PSS) or polyaniline. However, freestanding and linear contracting actuator fibers made solely of electropolymerized PPy are not available yet.
View Article and Find Full Text PDFTransducing chemical energy through catalysis by an artificial molecular motor.
Nature
January 2025
Department of Chemistry, University of Manchester, Manchester, UK.
Cells display a range of mechanical activities generated by motor proteins powered through catalysis. This raises the fundamental question of how the acceleration of a chemical reaction can enable the energy released from that reaction to be transduced (and, consequently, work to be done) by a molecular catalyst. Here we demonstrate the molecular-level transduction of chemical energy to mechanical force in the form of the powered contraction and powered re-expansion of a cross-linked polymer gel driven by the directional rotation of artificial catalysis-driven molecular motors.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!