Mercury speciation, controls on methylmercury (MeHg) production, and bed sediment-pore water partitioning of total Hg (THg) and MeHg were examined in bed sediment from eight geochemically diverse streams where atmospheric deposition was the predominant Hg input. Across all streams, sediment THg concentrations were best described as a combined function of sediment percent fines (%fines; particles < 63 microm) and organic content. MeHg concentrations were best described as a combined function of organic content and the activity of the Hg(II)-methylating microbial community and were comparable to MeHg concentrations in streams with Hg inputs from industrial and mining sources. Whole sediment tin-reducible inorganic reactive Hg (Hg(II)R) was used as a proxy measure for the Hg(II) pool available for microbial methylation. In conjunction with radiotracer-derived rate constants of 203Hg(II) methylation, Hg(II)R was used to calculate MeHg production potential rates and to explain the spatial variability in MeHg concentration. The %Hg(II)R (of THg) was low (2.1 +/- 5.7%) and was inversely related to both microbial sulfate reduction rates and sediment total reduced sulfur concentration. While sediment THg concentrations were higher in urban streams, %MeHg and %Hg(II)R were higher in nonurban streams. Sediment pore water distribution coefficients (log Kd's) for both THg and MeHg were inversely related to the log-transformed ratio of pore water dissolved organic carbon (DOC) to bed sediment %fines. The stream with the highest drainage basin wetland density also had the highest pore water DOC concentration and the lowest log Kd's for both THg and MeHg. No significant relationship existed between overlying water MeHg concentrations and those in bed sediment or pore water, suggesting upstream sources of MeHg production may be more important than local streambed production as a driver of water column MeHg concentration in drainage basins that receive Hg inputs primarily from atmospheric sources.

Download full-text PDF

Source
http://dx.doi.org/10.1021/es802698vDOI Listing

Publication Analysis

Top Keywords

pore water
16
mehg production
12
thg mehg
12
bed sediment
12
mehg concentrations
12
mehg
11
sediment
9
production bed
8
bed sediment-pore
8
water
8

Similar Publications

A fundamental study has been conducted on the effective utilization of rice husk ash (RHA) in concrete. RHA is an agricultural byproduct characterized by silicon dioxide as its main component, with a content of 90% or more and a porous structure that absorbs water during mixing, thereby reducing fluidity. The quality of RHA varies depending on the calcination environment; however, the effect is not consistent.

View Article and Find Full Text PDF

Soil reinforcement is one of the techniques used to enhance the engineer characteristics of the soil. Various techniques can be employed to stabilise problematic soils, such as soft clay. These include the utilisation of portland cement, lime, fly ash, ground freezing, jet grouting, prefabricated vertical drains, and thermal approaches.

View Article and Find Full Text PDF

Lignin-based ternary composite hydrogel for slow-release of fertilizer and soil water retention.

Int J Biol Macromol

January 2025

School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006, China. Electronic address:

Slow-release hydrogel can effectively improve nutrient content of soil and reduce evaporation rate of the water. However, petroleum-based hydrogels will cause secondary pollution to soil. Herein, the nitrogen content of aminated lignin reached 7 % by Mannish reaction with microwave heating, and the influence of microwave heating on the aminated process of lignin was investigated.

View Article and Find Full Text PDF

A novel fabrication of graphitic carbon nitride/chitosan composite modified with thiosemicarbazide for the effective static and dynamic adsorption of Pb from aqueous media.

Int J Biol Macromol

January 2025

Department of Physical Sciences, Chemistry Division, College of Science, Jazan University, P.O. Box. 114, Jazan 45142, Kingdom of Saudi Arabia. Electronic address:

In this work, graphitic carbon nitride (g-CN) prepared by thermal treatment, graphitic carbon nitride/chitosan (GCS), and graphitic carbon nitride/chitosan embedded thiosemicarbazide (TGCS) were developed as an effective solid adsorbent. The fabricated adsorbents were characterized by nitrogen adsorption, ATR-FTIR, TGA, XRD, ζ potential, SEM, and TEM, where TGCS composite had a higher surface area (536.79 m/g), total pore volume (0.

View Article and Find Full Text PDF

Despite the significant benefits of aquatic passive sampling (low detection limits and time-weighted average concentrations), the use of passive samplers is impeded by uncertainties, particularly concerning the accuracy of sampling rates. This study employed a systematic evaluation approach based on the combination of meta-analysis and quantitative structure-property relationships (QSPR) models to address these issues. A comprehensive meta-analysis based on extensive data from 298 studies on the Polar Organic Chemical Integrative Sampler (POCIS) identified essential configuration parameters, including the receiving phase (type, mass) and the diffusion-limiting membrane (type, thickness, pore size), as key factors influencing uptake kinetic parameters.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!