Objectives: Adhesive luting of indirect restorations can be carried out employing dual- or light-curing materials. This in vitro study evaluated the degree of conversion (DC) of the materials employed in this procedure, seeking how the combination of time and power of curing applied during polymerisation, as well as the temperature of the light-curing composite, influenced the DC.
Materials And Methods: One hundred and eighty onlays of different thicknesses (2 mm, 3 mm, 4 mm) were luted with three different composites: two dual-curing cements (Variolink II and Calibra) and a light-curing composite (Venus). The same halogen lamp was used with three different modalities selected to provide a constant quantity of energy. The time/power combinations tested were 400 mW/cm(2) for 120 s, 800 mW/cm(2) for 60s and 1200 mW/cm(2) for 40 s. The light-curing composite was employed at room temperature and after preheating at 54 degrees C. Each sample was examined in three positions using the Micro-Raman Dilor HR LabRam spectrometer to evaluate the polymer conversion degree. The data were analysed using analysis of variance and the Student-Newman-Keuls test (p=0.05).
Results: The dual-curing materials showed average conversion percentages close to 64%, although onlays thickness clearly influence the degree of conversion, the light-curing composite showed satisfactory results only when onlays thickness was thin, however preheating significantly improved the performance of the light-curing composite under onlays of great thickness.
Conclusions: Optimal luting of indirect restorations is clearly dependent from light source power, irradiation time and dual-cure luting cement or light-curing composite chosen. It should be calibrated for each material to acquire high DCs. Preheating of light-curing only composites allows for the materials to reach optimal conversion degrees.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jdent.2009.04.001 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
[Photopolymerizable compositions for bone tissue regeneration].
Stomatologiia (Mosk)
January 2025
Central Research Institute of Dentistry and Maxillofacial Surgery, Moscow, Russia.
The review considers methods of manufacturing photopolymerizable compositions for bone tissue repair, as well as polymers and photoinitiators used for this purpose. Their physical and biological properties are described. Examples of light-curing compositions used in biomedicine and tissue engineering are given.
View Article and Find Full Text PDFOptical Adhesives and Screen Sealants for Foldable Displays: Analysis, Progress and Trends.
ACS Appl Mater Interfaces
January 2025
School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150000, China.
The realm of flexible display devices, particularly centered around folding screen smartphones, is undergoing rapid advancements. As integral components, optical adhesives and screen sealants for these devices play pivotal roles in determining their overall performance. This paper provides a comprehensive overview of the evolution of display technology and display screens, delving into the critical function of optical adhesives within this framework.
View Article and Find Full Text PDFEffect of Indenter Load on Vickers Microhardness and Indentation Depth of One Resin Composite.
Materials (Basel)
December 2024
Department Dental Clinical Sciences, Dalhousie University, 5981 University Avenue, Halifax, NS B3H 4R2, Canada.
The load and size of the indentation may affect the hardness value. This study investigated the effect of the indentation size on the microhardness of one resin-based composite (RBC). Metal molds 4 mm deep and 12 mm in diameter were filled with Tetric EvoCeram Bulk Fill (Ivoclar) and light-cured for 10 s using a broad-spectrum LED curing light.
View Article and Find Full Text PDFLight-curing of restorative composite through milled and 3D-printed full-contour zirconia for adhesive luting.
Dent Mater
January 2025
KU Leuven, Department of Oral Health Sciences, BIOMAT & UZ Leuven, Dentistry, Kapucijnenvoer 7, 3000 Leuven, Belgium. Electronic address:
Objectives: To evaluate the effect of different zirconia compositions and manufacturing processes on the light irradiance (LI), to measure the degree of conversion (DC) of solely light-curing restorative composite underneath these zirconia grades and to evaluate the respective zirconia microstructures.
Methods: Six dental zirconia grades (GC HT, GC UHT [GC]; Katana HT, Katana UTML [Kuraray Noritake]; Lava Esthetic, Lava Plus [3 M Oral Care]) were cut and sintered per manufacturer instructions. One 3D-printed zirconia grade (XJet [XJET]) was prepared according to previous research.
Effect of Glass Fiber Reinforcement on Marginal Microleakage in Class II Composite Restorations: An In Vitro Pilot Study.
Dent J (Basel)
December 2024
Department of Teeth and Dental Arches Morphology, George Emil Palade University of Medicine, Pharmacy, Science and Technology of Targu Mures, 540139 Targu Mures, Romania.
Polymerization shrinkage of composite resins affects the marginal closure of direct dental restorations. It is responsible for developing secondary caries and indirectly affects the survival rate of restorations. This study aims to investigate the null hypothesis, which states that there are no significant differences in the marginal microleakage of Class II restorations when examined in vitro using different dental adhesives, whether the restoration material used is a composite with glass fiber reinforcement or not.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!