Cryopreservation is now a common practice in the fields of aquaculture, conservation and biomedicine. One approach for maintaining the genetic diversity of both nuclear genome and mitochondrial DNA is cryopreservation of the blastomere. This study sets out to determine an optimum cryopreservation protocol for blastomeres isolated from 50% epiboly zebrafish embryos. Freezing was performed in 0.25 ml straws in a programmable freezer. The optimum slow cooling protocol is identified as 5 degree C per min, from 22 to -6 degree C, holding for 15 min, 0.3 degree C per min from -6 to -40 degree C, 2 degree C per min from -40 to -80 degree C, cells were held for 10 min at -80 degree C before plunging into the liquid nitrogen. Thawing was performed in a water bath at 28 degrees C for 15 s followed by four step-wise removal of the cryoprotectant. Blastomeres had the highest survival level (70.2 +/- 3.2%) when a mixture of 1.5 M dimethyl sulfoxide (DMSO) and 0.1 M sucrose were used as cryoprotectants. This was higher than that achieved with either of the sugar alternatives, trehalose (60.6 +/- 3.1%) or glucose (43.1 +/- 4.9%). In the present study, cryopreservation of 50 percent epiboly zebrafish blastomeres was studied for the first time using controlled slow cooling method.
Download full-text PDF |
Source |
---|
Inorg Chem
January 2025
Department of Applied Chemistry, Faculty of Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan.
-site cation ordering in double perovskites is crucially important for their physical properties. In this study, polycrystalline samples of Zr-based double perovskite NaLaZrO were synthesized via high-temperature solid-state reactions, and the influence of the heating temperature and cooling rate on their crystal structures was investigated using synchrotron X-ray diffractometry and optical second harmonic generation. The samples prepared at 1200 °C, followed by slow cooling to room temperature, crystallize in a polar 2 structure, exhibiting partial -site cation ordering, with Na- and La-rich -site layers alternately stacked along the axis.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
Department of Grain Science and Industry, Kansas State University, Manhattan, KS 66506, USA. Electronic address:
Starch spherulite is a unique form of resistant starch characterized by a spherical structure with crystalline lamellae that are radially oriented and may find applications in delivery of nutrients and bioactives to the lower gastrointestinal tract. Formation of starch spherulites generally requires heating to a high temperature followed by quenching and long crystallization time. The objectives of this study were to gain a deeper understanding of the factors influencing spherulite formation from pea starch (PS) and high-amylose maize starch (HAMS) and investigate if spherulites could be formed by a slow cooling rate and determine the crystalline structure and morphology of the spherulites formed.
View Article and Find Full Text PDFJ Phys Chem B
January 2025
Research Center for Advanced Science and Technology, The University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8904, Japan.
As a liquid is supercooled toward the glass transition point, its dynamics slow significantly, provided that crystallization is avoided. With increased supercooling, the particle dynamics become more spatially heterogeneous, a phenomenon known as dynamic heterogeneity. Since its discovery, this characteristic of metastable supercooled liquids has garnered considerable attention in glass science.
View Article and Find Full Text PDFJ Conserv Dent Endod
November 2024
Department of Metallurgical and Materials Engineering, National Institute of Technology, Srinagar, Jammu and Kashmir, India.
Objective: The present study aimed to evaluate the phase transformation behavior and elemental analysis of thermomechanical-treated nickel-titanium (NiTi) rotary instruments, TruNatomy (Dentsply Sirona), HyFlex CM (coltene, Whaledent), and Neoendo Flex (Orikam healthcare India), using differential scanning calorimetry (DSC), X-ray diffraction (XRD), and energy dispersive X-ray spectrometry.
Materials And Methods: A total of 18 NiTi rotary instruments, TruNatomy, Hyflex CM, Neoendo Flex, taper. 04, size 25 (except TruNatomy, size 26) were selected and were divided into three groups ( = 6).
Materials (Basel)
December 2024
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China.
In this study, molecular dynamics (MD) simulations were employed to compare the effects of different solidification conditions on the solidification behaviour, stress distribution, and degree of crystallization of iron. The results indicate significant differences in nucleation and microstructural evolution between the two solidification methods. In the homogeneous temperature field, the solidification of iron is characterized by instantaneous nucleation.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!