[Calcium carbonate precipitation in UASB reactors with different substrates].

Two lab scale upflow anaerobic sludge bed (UASB) reactors were operated at an organic loading rate of COD 9 kg x (m3 x d)(-1) to treat two kinds of calcium containing wastewaters, one of which took acetic acid as substrate and for the other, glucose and soluble starch were the substrate. Both the wastewaters contained 800 mg x L(-1) Ca+. Precipitation of calcium carbonate in the reactors was observed. The results showed that the kind of substrate had great influence on calcium carbonate precipitation. In the reactor treating acetic acid containing wastewater, a maximum calcium precipitation rate of 65% was achieved and an average rate of about 25% was then maintained. In contrast, the calcium precipitation rate for the glucose and soluble starch containing wastewater was only about 7.5%. It was also found that substantial precipitation only occurred 30 days after the reactor were operated for both of the wastewaters. After 180 days of operation, the ash content of the sludge in the reactors increased from about 10% to 70% for the acetic acid containing wastewater and 30% for the other. However, the increase of ash content had no negative influence on the COD removal efficiency, which was kept at about 90% throughout the experimental period. By the SEM it was inferred that the different substrates caused the differences of the granular sludge microstructure, leading to the diversity of calcium carbonate precipitation in the two reactors.