Statement Of The Problem: Light-curing of resin-based composites (RBCs) is associated with temperature increase in the pulp chamber, which may have a detrimental effect on the vital pulp.
Purpose: The purpose of the study was to evaluate temperature changes of silorane-, ormocer-, and dimethacrylate-based RBCs at the bottom surface of the RBC and in the pulp chamber roof dentin (PCRD) during curing.
Materials And Methods: In part A, temperatures were measured for Filtek LS (3M ESPE, St. Paul, MN, USA), Admira (Voco GmbH, Cuxhaven, Germany), and Herculite XRV (Kerr Corp., Orange, CA, USA) with a high-power light-emitting diode (LED) unit by placing thermocouples in contact with the bottom surface of the material in standardized acrylic molds. In part B, temperature changes in PCRD were measured in extracted molars during light-curing of adhesives and RBCs in 2-mm-deep cavities with a remaining dentin thickness (RDT) of 1 mm.
Results: Filtek LS showed a different temperature curve compared with Admira and Herculite XRV. Significantly higher temperatures were recorded for Filtek LS (p < 0.001) than for Admira and Herculite XRV in acrylic molds. Temperature rises recorded in PCRD for adhesives and RBCs were between 4.1 and 6.4 degrees C. No significant differences in PCRD temperatures were found between the three groups during adhesive curing and RBC curing (p > 0.05).
Conclusions: Filtek LS showed a different heat-generation pattern from and significantly higher temperatures than Admira and Herculite XRV when the materials were tested in acrylic molds. Similar temperatures were recorded in the PCRD during curing of adhesives and RBCs.
Clinical Significance: Although a substantial temperature rise in the bulk material occurred during light-curing of the three resin-based composites, a remaining dentin thickness of 1 mm caused a significant reduction in pulp chamber roof dentin temperatures. Temperatures measured in the pulp chamber roof dentin corresponding to the zone occupied by the postmitotic odontoblast layer were not statistically different for the three types of resin-based composites.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1111/j.1708-8240.2009.00244.x | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Prevalence and morphology of middle mesial canals in mandibular first molars and their relationship with anatomical aspects of the mesial root: a CBCT analysis.
BMC Oral Health
January 2025
Department of Endodontics, Shaanxi Provincial People's Hospital, Xi'an, China.
Background: This study aims to investigate the prevalence and morphology of middle mesial canal (MMC) in mandibular first molar (M1M) among a Northwestern Chinese population, and to analyze their relationship with anatomical aspects of the mesial root.
Methods: Cone beam computed tomography (CBCT) was utilized to evaluate 898 M1Ms and assess the incidence and morphology of MMC. The following parameters for M1M with or without MMC were obtained: the vertical distance between the first appearance of MMC and canal orifices (D), the distance between mesiobuccal (MB) and mesiolingual (ML) canals (D1), the buccolingual width(L1) and mesiodistal width (L2) of mesial roots, and the flatness degree(L1/L2) of mesial roots.
Evaluation of the efficiency of smear layer removal during endodontic treatment using scanning electron microscopy: an in vitro study.
BMC Oral Health
January 2025
Department of Dental Science, Damascus University, Damascus, Syria.
Background: The smear layer formed during root canal instrumentation negatively affects root canal irrigation activity, which in turn can affect the treatment prognosis of endodontic treatment.
Aim: The aim of this study is to compare the efficiency of smear layer and debris removal in root canals using different irrigation protocols using scanning electron microscopy (SEM).
Materials And Methods: The quality of smear layer removal throughout the root canal was assessed in 30 intact extracted teeth divided into 3 groups according to the irrigation protocol: Group 1: 3% sodium hypochlorite (NaOCL) alternately with 17% ethylenediaminetetraacetic acetate (EDTA) was used.
Effect of pulp-chamber lateral wall thickness and number on fracture resistance in endocrown-restored molars: An in vitro study.
J Dent Sci
January 2025
Department of Cariology and Endodontology, Peking University School and Hospital of Stomatology, Beijing, China.
Background/purpose: It remains unclear how the thickness and number of pulp-chamber lateral walls (PCLWs) affects fracture resistance in endocrown-restored teeth.
Materials And Methods: 64 mandibular molars were collected and randomly divided into eight groups (n = 8). In group C (control group), the teeth were untreated.
Mouse Model of Lipopolysaccharide (LPS)-Induced Pulpitis.
Bio Protoc
January 2025
Department of Stomatology, Peking Union Medical College Hospital, Beijing, China.
Pulpitis is an important and prevalent disease within the oral cavity. Thus, animal models are necessary tools for basic research focused on pulpitis. Researchers worldwide often use dogs and miniature pigs to construct animal models of pulpitis.
View Article and Find Full Text PDFEvaluation of tooth-specific optical properties for the development of a non-invasive pulp diagnostic system using Transmitted-light plethysmography: An in vitro study.
Arch Oral Biol
January 2025
Department of Pediatric Dentistry/Dentistry for Persons with Special Needs, Division of Oral Restitution, Graduate School, Institute of Science Tokyo, Japan.
Objectives: Transmitted-light plethysmography (TLP) is an objective and non-invasive pulp diagnosis method that has already been validated for applications for incisors. However, there is a demand for TLP use in the molars, it has not yet been established for this application. This study investigated the optimal light source wavelengths for TLP in premolars, to establish a pulp diagnosis system based on measuring pulpal blood flow.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!