Aim of the study was substantiation in experiments on rabbit ramus mandibulae of the method of mesenchymal stem cells (MSC) on the carrier from titanium and gold alloy for reparative osteogenesis enforcement. There was shown stimulating action of the MSC implantation in the bone wound upon reparative osteogenesis at the terms from 1 to 4 months. It was concluded that implants from titanium and gold alloy may be used as carrier for MSC for bone tissue reparative regeneration stimulation.
Download full-text PDF |
Source |
|---|
Publication Analysis
Top Keywords
Similar Publications
Osseointegration of 3D-Printable Polyetheretherketone-Magnesium Phosphate Bioactive Composites for Craniofacial and Orthopedic Implants.
ACS Biomater Sci Eng
January 2025
Department of Mechanical Engineering, Cleveland State University, Cleveland, Ohio 44115, United States.
Polyetheretherketone (PEEK) is a high-performance polymer material for developing varying orthopedic, spine, cranial, maxillofacial, and dental implants. Despite their commendable mechanical properties and biocompatibility, the major limitation of PEEK implants is their low affinity to osseointegrate with the neighboring bone. Over the last two decades, several efforts have been made to incorporate bioactive components such as bioceramic particles in PEEK to enhance its osseointegration capacity.
View Article and Find Full Text PDFBiomaterial Surface-Mediated Macrophages Exert Immunomodulatory Roles by Exosomal CCL2-Induced Membrane Integrin β1 Trafficking in Recipient Cells.
Adv Sci (Weinh)
January 2025
Shanxi Key Laboratory of Biomedical Metal Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan, 030024, China.
The interaction between biomaterials and immune system is a critical area of research, especially in tissue engineering and regenerative medicine. A fascinating and less explored aspect involves the immunomodulatory behaviors of macrophage (MΦ)-derived exosomes induced by biomaterial surfaces. Herein, untreated surface, nanostructured surface, and type I collagen (Col-I)-decorated nanostructured surface of titanium implants are chosen to culture MΦs, followed by extraction of MΦ-derived exosomes and investigation of their immunomodulatory functions and mechanisms.
View Article and Find Full Text PDFA dual-mode colorimetric/photothermal lateral flow biosensor based on Au/TiCT for HIV-DNA detection.
Anal Chim Acta
February 2025
Ministry of Education Key Laboratory for the Synthesis and Application of Organic Functional Molecules, Hubei Key Laboratory for Precision Synthesis of Small Molecule Pharmaceuticals, College of Chemistry and Chemical Engineering, Hubei University, Wuhan, 430062, PR China; Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), Nankai University, Tianjin, 300071, PR China. Electronic address:
Background: Traditional lateral flow biosensors (LFBs), which utilize colorimetric signals as output, possess the virtues of simplicity and rapidity. However, it also suffers from insufficient sensitivity and limited reliability. It is well known that the results of LFBs can be false positive, and it is difficult to perform accurate quantification under low-abundance targets.
View Article and Find Full Text PDF"Nano-In-Nano" Schottky Diodes Fabricated by Combining Self-Aligned Nanogap Patterning with Bottom-Up ZnO Nanowire Growth.
ACS Appl Electron Mater
January 2025
Electrical Engineering Division, Engineering Department, University of Cambridge, Cambridge CB3 0FA, U.K.
Nanoscale semiconductors offer significant advantages over their bulk semiconductor equivalents for electronic devices as a result of the ability to geometrically tune electronic properties, the absence of internal grain boundaries, and the very low absolute number of defects that are present in such small volumes of material. However, these advantages can only be realized if reliable contacts can be made to the nanoscale semiconductor using a scalable, low-cost process. Although there are many low-cost "bottom-up" techniques for directly growing nanomaterials, the fabrication of contacts at the nanoscale usually requires expensive and slow techniques like e-beam lithography that are also hard to scale to a level of throughput that is required for commercialization.
View Article and Find Full Text PDFThe effects of anodization and instrumentation on titanium abutment surface characteristics and biofilm formation.
J Prosthodont
January 2025
Department of Prosthodontics, Indiana University School of Dentistry, Indianapolis, Indiana, USA.
Purpose: To assess the impact of anodization and instrumentation on titanium abutment surface characteristics (surface roughness and wettability) and biofilm formation (viability and mass).
Materials And Methods: Titanium discs were obtained from pre-milled abutment blanks made of titanium-6aluminum-7niobium alloy. Polished samples were divided into three groups: un-anodized, gold-anodized, and pink-anodized.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!