Methane recovery from the anaerobic codigestion of municipal sludge and FOG.

Bioresour Technol

Carollo Engineers, 401 North Cattlemen Road, Sarasota, FL 34232, USA.

Published: August 2009

The anaerobic biodegradability of a mix of municipal primary sludge (PS), thickened waste activated sludge (TWAS) and fat, oil, and grease (FOG) was assessed using semi-continuous feed, laboratory-scale anaerobic digesters operated at mesophilic (35 degrees C) and thermophilic (52 degrees C) temperature. Addition of a large FOG fraction (48% of the total VS load) to a PS+TWAS mix, resulted in 2.95 times larger methane yield, 152 vs. 449 mL methane @ STP/g VS added at 35 degrees C and 2.6 times larger methane yield, 197 vs. 512 mL methane @ STP/g VS added at 52 degrees C. The high FOG organic load fraction was not inhibitory to the process. The results of this study demonstrate the benefit of sludge and FOG codigestion.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.biortech.2009.02.024DOI Listing

Publication Analysis

Top Keywords

sludge fog
8
times larger
8
larger methane
8
methane yield
8
methane stp/g
8
stp/g degrees
8
methane
5
fog
5
methane recovery
4
recovery anaerobic
4

Similar Publications

Article Synopsis
  • This study examines how conventional pollutants (organic sulfur) and emerging pollutants (microplastics, specifically PVC) interact during the incineration of dyeing sludge, potentially leading to secondary pollution.
  • The presence of PVC accelerates the breakdown of organic sulfur compounds and enhances the combustion process, resulting in increased emissions of harmful gases like CHSH, SO, and HCl.
  • A four-stage combustion model effectively describes this interaction, showcasing how PVC and organic sulfur lower the activation energy needed for bond breakage, making the combustion process more efficient but also more polluting.
View Article and Find Full Text PDF

Applying microbial electrolysis cells (MEC) is a biological approach to enhance the growth of high amounts of electroactive biofilm for extracellular electron transfer. The electroactive biofilm degrades the organics by oxidizing them at the anode and producing electrical energy. Addition of waste-activated sludge (WAS) with fat grease oil (FOG) produces an optimal reactor environment for microbial growth to enhance the exchange of electrons between cells via microbial electrolysis.

View Article and Find Full Text PDF

The deposition of fats, oil, and grease (FOG) in sewers reduces conveyance capacity and leads to sanitary sewer overflows. The major contributing factor lies in the indiscriminate disposal of used cooking oil (UCO) via kitchen sinks. While prior investigations have mostly highlighted the significance of Ca from concrete biocorrosion, the influence of common metal ions (e.

View Article and Find Full Text PDF

Analysis of key circRNA events in the AOP framework of TCS acting on zebrafish based on the data-driven.

Ecotoxicol Environ Saf

July 2024

National and Local Joint Engineering Laboratory of Municipal Sewage Resource Utilization Technology, School of Environmental Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, China. Electronic address:

Triclosan (TCS) is a broad-spectrum antibiotic widely used in various personal care products. Research has found that exposure to TCS can cause toxic effects on organisms including neurotoxicity, cardiotoxicity, disorders of lipid metabolism, and abnormal vascular development, and the corresponding toxic mechanisms are gradually delving into the level of abnormal expression of miRNA regulating gene expression. Although the downstream mechanism of TCS targeting miRNA abnormal expression to induce toxicity is gradually improving, its upstream mechanism is still in a fog.

View Article and Find Full Text PDF

The accumulation of fat, oil and grease (FOG) deposits in sanitary sewer systems is a significant cause of sewer overflows, mainly due to their tendency to adhere to pipe walls. The aim of this study is to (i) develop laboratory-prepared FOG deposits using a mixture of iron (Fe) and aluminium (Al) metal ions, fatty acids, saccharides and cooked oils, in addition to various sanitary waste materials such as paper towels, wipes and pads and (ii) examine the characteristics of these FOG deposits. The goals of this study were to (i) gain a deeper understanding of the impact of sanitary waste on the formation of FOG deposits and (ii) discuss the detailed physiochemical properties of these FOG deposits.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!