AI Article Synopsis
- The study aimed to investigate how Radii barrier sleeves affect the cure depth of composite resin.
- The experiment involved filling a cylinder mold with resin and comparing the cure depths using a photo-curing machine with and without the sleeves.
- Results showed a minimal difference in cure depth (4.38 mm vs. 4.27 mm) with no significant statistical variation, concluding that the sleeves do not impact the cure depth under the same lighting conditions.
Article Abstract
Objective: To explore the effect of Radii barrier sleeves on the cure depth of composite resin.
Methods: Cylinder mold was prepared, and the resin was filled strictly into the mold. The surface was flattened and then cured with plastic engraver's knife.The depth of composite resin which was cured by QHL75TM with or without Radii barrier sleeves was compared.
Results: The cure depth of composite resin which were cured by QHL75TM with or without Radii barrier sleeves of photo-curing machine was 4.38 mm and 4.27 mm respectively,with no statistical difference.
Conclusion: The cure depth of composite resin is not influenced by Radii barrier sleeves under the same light condition.
Download full-text PDF |
Source |
|---|
Publication Analysis
Top Keywords
Similar Publications
Adhesion-driven vesicle translocation through membrane-covered pores.
Biophys J
January 2025
Theoretical Physics of Living Matter, Institute of Biological Information Processing and Institute for Advanced Simulation, Forschungszentrum Jülich, 52425 Jülich, Germany. Electronic address:
Translocation across barriers and through constrictions is a mechanism that is often used in vivo for transporting material between compartments. A specific example is apicomplexan parasites invading host cells through the tight junction that acts as a pore, and a similar barrier crossing is involved in drug delivery using lipid vesicles penetrating intact skin. Here, we use triangulated membranes and energy minimization to study the translocation of vesicles through pores with fixed radii.
View Article and Find Full Text PDFTailoring Polyelectrolyte Multilayer Nanofiltration Membranes by Aerosol-Assisted Printing: Insights into Membrane Formation Mechanisms.
Environ Sci Technol
January 2025
Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University, Kowloon, Hong Kong 999077, China.
Polyelectrolyte multilayer (PEM) membranes, with advantageous features of versatile chemistry and structures, are driving the development of advanced nanofiltration (NF) membranes with exceptional performance. While developing a printing method holds great promise for the eventual mass production of these membranes, reports on the printing method and the underlying mechanisms of membrane formation are currently scarce. Herein, we develop an aerosol-assisted printing (AAP) system for fabricating PEM NF membranes with highly tunable separation characteristics.
View Article and Find Full Text PDFImproving Corrosion Resistance of Rare Earth Zirconates to Calcium-Magnesium-Alumina-Silicate Molten Salt Through High-Entropy Strategy.
Materials (Basel)
December 2024
School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China.
The erosion caused by high-temperature calcium-magnesium-alumina-silicate (CMAS) has emerged as a critical impediment to the advancement of thermal barrier coating (TBC). In this study, a series of high-entropy rare earth zirconates, (LaSmDyErGd)(ZrCe)O ( = 0, 0.2, 0.
View Article and Find Full Text PDFCMAS Corrosion Behavior of Mid-Entropy Rare-Earth Hafnate (YGdYb)HfO as Thermal Barrier Coating Candidate.
Materials (Basel)
December 2024
Tianjin Key Laboratory of Advanced Joining Technology, School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China.
High-temperature CMAS corrosion has become a crucial factor inhibiting the further development of thermal barrier coatings (TBCs) because of the increasing service temperature of aero-engines. Herein, a novel mid-entropy rare-earth hafnate (YGdYb)HfO (YGYbH) was prepared by ultrafast high-temperature sintering (UHS) technology, and its CMAS corrosion behavior and mechanism were investigated. During corrosion, the CaRE(SiO)O apatite phase with a lower formation enthalpy and entropy-stabilized effect had a more intense tendency to be generated, which improves the density and stability of the reaction layer, hindering the further penetration of molten CMAS.
View Article and Find Full Text PDFRevisiting Thomson's model with multiply charged superfluid helium nanodroplets.
J Chem Phys
December 2024
Departament FQA, Facultat de Física, Universitat de Barcelona, Av. Diagonal 645, 08028 Barcelona, Spain.
We study superfluid helium droplets multiply charged with Na+ or Ca+ ions. When stable, the charges are found to reside in equilibrium close to the droplet surface, thus representing a physical realization of Thomson's model. We find the minimum radius of the helium droplet that can host a given number of ions using a model whose physical ingredients are the solvation energy of the cations, calculated within the helium density functional theory approach, and their mutual Coulomb repulsion energy.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!