Electrostatic and electrokinetic contributions to the elastic moduli of a driven membrane.

Eur Phys J E Soft Matter

Laboratoire de Physico-Chimie Théorique, UMR 7083, ESPCI, Paris, France.

Published: March 2009

We discuss the electrostatic contribution to the elastic moduli of a cell or artificial membrane placed in an electrolyte and driven by a DC electric field. The field drives ion currents across the membrane, through specific channels, pumps or natural pores. In steady state, charges accumulate in the Debye layers close to the membrane, modifying the membrane elastic moduli. We first study a model of a membrane of zero thickness, later generalizing this treatment to allow for a finite thickness and finite dielectric constant. Our results clarify and extend the results presented by D. Lacoste, M. Cosentino Lagomarsino, and J.F. Joanny (EPL 77, 18006 (2007)), by providing a physical explanation for a destabilizing term proportional to [see formula in text] in the fluctuation spectrum, which we relate to a nonlinear (E(2)) electrokinetic effect called induced-charge electro-osmosis (ICEO). Recent studies of ICEO have focused on electrodes and polarizable particles, where an applied bulk field is perturbed by capacitive charging of the double layer and drives the flow along the field axis toward surface protrusions; in contrast, we predict "reverse" ICEO flows around driven membranes, due to curvature-induced tangential fields within a nonequilibrium double layer, which hydrodynamically enhance protrusions. We also consider the effect of incorporating the dynamics of a spatially dependent concentration field for the ion channels.

Download full-text PDF

Source
http://dx.doi.org/10.1140/epje/i2008-10433-1DOI Listing

Publication Analysis

Top Keywords

elastic moduli
12
double layer
8
membrane
6
field
5
electrostatic electrokinetic
4
electrokinetic contributions
4
contributions elastic
4
moduli driven
4
driven membrane
4
membrane discuss
4

Similar Publications

Background: Currently, some novel rods with lower elastic modulus have the potential as alternatives to traditional titanium alloy rods in lumbar fusion. However, how the elastic modulus of the rod (rod-E) influences the biomechanical performance of lumbar interbody fusion remains unclear. This study aimed to explore the quantitative relationships between rod-E and the biomechanical performance of transforaminal lumbar interbody fusion (TLIF).

View Article and Find Full Text PDF

Hydrogels are natural/synthetic polymer-based materials with a large percentage of water content, usually above 80 %, and are suitable for many application fields such as wearable sensors, biomedicine, cosmetics, agriculture, etc. However, their performance is susceptible to environmental changes in temperature, relative humidity, and mechanical deformation due to their aqueous and soft nature. We investigate the mechanical response of both filled and unfilled alginate/gellan hydrogels using a combined axial-torsional rheometric approach with cylindrical samples of large length/diameter ratio under controlled temperature and relative humidity.

View Article and Find Full Text PDF

Silicate glasses are commonly used for many important industrial applications. As such, the literature provides a wealth of different structural, physical, thermodynamic and mechanical properties for many different chemical compositions of oxide glasses. However, a frequent limitation to existing datasets is that only one or two material properties can be evaluated for a given sample.

View Article and Find Full Text PDF

Single-Crystal Elasticity of α-Hydroquinone-An Analogue for Organic Planetary Materials.

ACS Earth Space Chem

January 2025

Department of Physics and Astronomy, University of Texas at San Antonio, San Antonio, Texas 78249, United States.

In this study, we measured the single-crystal elasticity of α-hydroquinone at ambient conditions using Brillouin spectroscopy to assess the feasibility of this technique for studying the mechanical properties of organic ices in the outer solar system. In this study, α-hydroquinone serves as an ambient temperature analogue for low-temperature organic ices on Titan and other solar system bodies. We found that a satisfactory Brillouin spectrum can be obtained in less than 5 min of experimental time with negligible damage to the sample.

View Article and Find Full Text PDF

Fast 3D printing of fine, continuous, and soft fibers via embedded solvent exchange.

Nat Commun

January 2025

Department of Mechanical Science and Engineering, The Grainger College of Engineering, University of Illinois Urbana-Champaign, Urbana, IL, USA.

Nature uses fibrous structures for sensing and structural functions as observed in hairs, whiskers, stereocilia, spider silks, and hagfish slime thread skeins. Here, we demonstrate multi-nozzle printing of 3D hair arrays having freeform trajectories at a very high rate, with fiber diameters as fine as 1.5 µm, continuous lengths reaching tens of centimeters, and a wide range of materials with elastic moduli from 5 MPa to 3500 MPa.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!