Surgical hand disinfection using alcohol: the effects of alcohol type, mode and duration of application.

J Hosp Infect

Department of Hygiene and Medical Microbiology, Medical University Vienna, Kinderspitalgasse 15, A-1095 Vienna, Austria.

Published: March 2009

Due to their strong antimicrobial activity, rapid action, good dermal tolerance and ease of application, alcohol-based hand rubs are recommended for pre-operative preparation of the surgical team's hands. Using the EN 12791 protocol, three commercial products containing either mixtures of propan-1-ol and propan-2-ol or ethanol at total alcohol concentrations (w/w) between 73% (propanols) and 78.2% (ethanol), as the main active agents, were tested with a shortened application of 1.5 min rather than the usual 3 min. Preparation A containing 30% propan-1-ol and 45% propan-2-ol not only passed the test at this short application but even exceeded, though not significantly, the efficacy of the reference disinfection procedure in EN 12791 when applied for 3 min. Preparation B containing 45% propan-1-ol and 28% propan-2-ol fulfilled the required standard whereas the ethanol (78.2%)-based product C did not (P<0.1). This demonstrates that some, but not all, alcohol-based hand rubs pass the test even within 1.5 min, emphasising the importance of validation before a product is introduced into clinical practice. In another series with both preparation A and 60% v/v propan-1-ol, it was demonstrated that the additional inclusion of the forearms into the disinfection procedure, not required by EN 12791 but normal practice in surgical hand disinfection, does not significantly interfere with the antimicrobial efficacy of either hand rub. Therefore, the mode of test procedure in EN 12791 does not need specific adaptation for hand disinfection by surgical teams.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jhin.2008.11.006DOI Listing

Publication Analysis

Top Keywords

min preparation
8
surgical hand
4
hand disinfection
4
disinfection alcohol
4
alcohol effects
4
effects alcohol
4
alcohol type
4
type mode
4
mode duration
4
application
4

Similar Publications

Deoxynivalenol (DON) is one of the most harmful mycotoxins that poses great health threats to human and animals. Herein, a simple and sensitive magnetic beads-based fluorescent biosensor was successfully prepared for detection of DON in cereals. A stable double-stranded DNA (dsDNA, biotin-sDNA+FAM-cDNA/AP) was formed on the surface of streptavidin-coated magnetic beads (SMBs).

View Article and Find Full Text PDF

Metal-organic frameworks (MOFs) derived materials are extensively utilized in wastewater treatment owing to their remarkable catalytic efficacy and durability. This study exploited iron-cerium-based bimetallic metal-organic framework (FeCe-MOF) as a sacrificial template, which was subsequently calcined at 700 °C to produce an iron-cerium-based bimetallic carbon nanospheres (FeCe@C). The FeCe@C has active sites of bimetallic Fe and Ce derivatives, demonstrating exceptional activation efficiency for persulfate, resulting in approximately 98.

View Article and Find Full Text PDF

Polyimide (PI)-based gas separation membranes are of great interest in the field of H purification owing to their good thermal stability, chemical stability, and mechanical properties. Among polyimide-based membranes, intrinsically microporous polyimides are easily soluble in common organic solvents, showing great potential for fabricating hollow fiber gas separation membranes. However, based on the solution-diffusion model, improving the free volume or the movability of polymer chains can improve gas permeability, but would result in poor thermal stability.

View Article and Find Full Text PDF

Objective: To investigate the safety, feasibility and acceptability of the Neurofenix platform for upper-limb rehabilitation in acute and subacute stroke.

Design: A feasibility randomised controlled trial with a parallel process evaluation.

Setting: Acute Stroke Unit and participants' homes (London, UK).

View Article and Find Full Text PDF

Iontophoresis-driven transdermal drug delivery system based on porous microneedles for hyperuricemia treatment.

Int J Pharm

January 2025

School of Materials Science and Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China; International Scientific and Technological Cooperation Base of Intelligent Biomaterials and Functional Fibers, Hangzhou 310018, China; Zhejiang-Mauritius Joint Research Center for Biomaterials and Tissue Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, PR China. Electronic address:

An iontophoresis-driven porous microneedles (IPMNs) system has been developed for hyperuricemia management, which can be effectively prolong the anti-hyperuricemia effect. Porous microneedles (PMNs) with good biocompatibility, high porous volume, and excellent substance exchange capacity were firstly prepared for drug transdermal delivery and active iontophoresis.In vitro experiments showed that the transdermal delivery efficiency of anti-hyperuricemia drug (Allopurinol, AP) could be controlled using the iontophoresis current of IPMNs system.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!