This research focused on immersion method synthesis of visible light active salicylic acid (SA)-modified TiO2 nanotube array electrode and its photoelectrocatalytic (PEC) activity. The SA-modified TiO2 nanotube array electrode was synthesized by immersing in SA solution with an anodized TiO2 nanotube array electrode. Scanning electron microscope (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), infrared spectroscopy (IR), UV-vis diffuse reflectance spectrum (DRS), and Surface photovoltage (SPV) were used to characterize this electrode. It was found that SA-modified TiO2 nanotube array electrode absorbed well into visible region and exhibited enhanced visible light PEC activity on the degradation of p-nitrophenol (PNP). The degradation efficiencies increased from 63 to 100% under UV light, and 79-100% under visible light (lambda>400 nm), compared with TiO2 nanotube array electrode. The enhanced PEC activity of SA-modified TiO2 nanotube array electrode was attributed to the amount of surface hydroxyl groups introduced by SA-modification and the extension of absorption wavelength range.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jhazmat.2008.11.066 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Ultrathin ALD Coatings of Zr and V Oxides on Anodic TiO Nanotube Layers: Comparison of the Osteoblast Cell Growth.
ACS Appl Mater Interfaces
December 2024
Central European Institute of Technology, Brno University of Technology, Purkynova 123, 612 00 Brno, Czech Republic.
The current study investigates and compares the biological effects of ultrathin conformal coatings of zirconium dioxide (ZrO) and vanadium pentoxide (VO) on osteoblastic MG-63 cells grown on TiO nanotube layers (TNTs). Coatings were achieved by the atomic layer deposition (ALD) technique. TNTs with average tube diameters of 15, 30, and 100 nm were fabricated on Ti substrates (via electrochemical anodization) and were used as primary substrates for the study.
View Article and Find Full Text PDFUV-activated gas sensor based on ordered mesoporous ZnO-TiO heterogeneous composites for trace NO detection at room temperature.
Talanta
December 2024
School of Materials Science and Engineering, Shanghai Institute of Technology, Shanghai 201418, China. Electronic address:
The growing modern industry has promoted the development of gas sensors for environmental monitoring and safety checks. However, the traditional chemical resistance gas sensor still has some disadvantages such as high power consumption and limited detection, mainly due to the lack of charge transfer ability of sensing materials. In this paper, an ordered UV-activated gas sensor with mesoporous ZnO/TiO nanotube composite was prepared by precisely controlling the growth of ZnO on the inner wall of TiO nanotube.
View Article and Find Full Text PDFConstructing Heterojunction Photocatalyst Systems with Spatial Distribution of Au Single Atoms for CO Reduction.
ACS Appl Mater Interfaces
December 2024
School of Environmental Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, P. R. China.
In single-atomic photocatalyst systems, the spatial distribution of single atoms on heterojunctions and its impact on photocatalytic processes, particularly on carrier dynamics and the CO reduction process involving multielectron reactions, remains underexplored. To address this gap, a WO/TiO nanotube heterojunction with a spatially selective distribution of Au single atoms was developed using an oxygen vacancy anchoring strategy for CO photoreduction. By anchoring Au atoms onto the WO or TiO components, a substantial number of active sites are generated and the electron transfer pathways from the heterojunction toward Au sites are formed, thereby enhancing carrier separation and concentration.
View Article and Find Full Text PDFsynthesis of an Al and V co-doped TiO NTA interlayer-enhanced PbO composite for efficient zinc electrowinning.
Nanoscale
December 2024
Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, China.
The high overpotential of the oxygen evolution reaction (OER) and the strong corrosion of the anode are the main problems currently faced by the zinc hydrometallurgical process. This study achieved the successful synthesis of titanium dioxide nanotubes doped by Al and V on a TC4 alloy. Subsequently, a composite electrode, TC4/AVTN-7/PbO-ZrO-CoO, was prepared utilizing composite electrodeposition.
View Article and Find Full Text PDFEnhancement of biocompatibility of anodic nanotube structures on biomedical Ti-6Al-4V alloy via ultrathin TiO coatings.
Front Bioeng Biotechnol
December 2024
Center of Materials and Nanotechnologies, Faculty of Chemical Technology, University of Pardubice, Pardubice, Czechia.
This work aims to describe the effect of the surface modification of TiO nanotube (TNT) layers on Ti-6Al-4V (TiAlV) alloy by ultrathin TiO coatings prepared via Atomic Layer Deposition (ALD) on the growth of MG-63 osteoblastic cells. The TNT layers with two distinctly different inner diameters, namely ∼15 nm and ∼50 nm, were prepared via anodic oxidation of the TiAlV alloy. Flat, i.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!