Influencing factors, adsorption isotherm, adsorption kinetics and preliminary discussion on the mechanism of sulfide adsorption by nanoscale iron prepared in laboratory were studied using manual simulation sulfide wastewater. Experimental results indicate that the removal efficiency of S2- increases with increasing iron dosage and decreases with increasing initial S2- concentration and pH values. The removal efficiency of S2- is 100% when initial concentration is less than 100 mg x L(-1) and are 87.34%, 65.80% and 44.61% at pH 2, 7 and 13. The temperature at 25 degrees C favors the maximum adsorption of S2- with 19.17 mg x g(-1) of equilibrium adsorption quantity and the adsorption capacity decreas at higher or lower temperature. The adsorption data fit well to the Langmuir equation and the Freundlich equation. The sulfide adsorption follows the pseudo second order equation with the maximum initial sorption rate(h) is 1.575 3 mg x (g x mg)(-1) at 25 degrees C and the adsorption rate constant increases with the increasing of temperature. The activation energy(Ea) is 8.22 kJ x mol(-1). The mechanism of sulfide removal is being sorbed onto the iron nanoparticles via formation of surface compleses, FeOSH and iron sulfides (FeS, FeS2, FeSn).
Download full-text PDF |
Source |
|---|
Publication Analysis
Top Keywords
Similar Publications
In situ Selenization Induced Electron-Rich Pd with Weakened O2 Adsorption for Boosted Photocatalytic H2O2 Production.
Chemistry
January 2025
China University of Geosciences, Faculty of Materials Science and Chemistry, CHINA.
Pd cocatalysts show great potential for the photocatalytic production of H2O2. However, the catalytic efficiency of Pd cocatalyst is limited due to the strong adsorption of O2, which promotes O-O bond cleavage and thus reduces selectivity for the two-electron O2 reduction reaction. Considering that adjusting the electron density of Pd can predominately optimize Pd-Oads bond strength, in this work, electron-rich Pd sites are constructed by introducing Bi2Se3 middle layer between Pd cocatalysts and (010) facet of BiVO4 using an in-situ selenization strategy.
View Article and Find Full Text PDFCorrection to: Utilising date palm fibres as a permeable reactive barrier to remove methylene blue dye from groundwater: a batch and continuous adsorption study.
Environ Monit Assess
January 2025
Department of Environmental Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq.
Study on the modulation mechanism of the optoelectronic properties based on common electrode metal atom adsorption on graphene/MoTe.
J Mol Model
January 2025
College of Electronics and Information, Xi'an Polytechnic University, Xian, People's Republic of China.
Context: The two-dimensional graphene/MoTe heterostructure holds extensive potential applications in optoelectronic devices, sensors, and catalysts. To expand its optical applications, this study systematically investigates the adsorption stability of metal atoms (Au, Pt, Pd, and Fe) on the graphene/MoTe and their influence on its optoelectronic properties employing first-principles methods. The findings indicate that after the adsorption of Au and Pd, the structure retains its direct bandgap properties, while the adsorption of Pt and Fe exhibits indirect bandgap characteristics.
View Article and Find Full Text PDFIntermetallic RNiSi (R = Ca, La, and Y) Catalysts with Electron-Rich Ni Sites for Continuous Flow Selective Hydrogenation of Maleic Anhydride.
ACS Appl Mater Interfaces
January 2025
State Key Laboratory of Fine Chemicals, Laboratory of Advanced Materials and Catalytic Engineering, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China.
The industrial advancement of downstream products resulting from the directed hydrogenation of maleic anhydride is hindered by the limitations related to the activity and stability of catalysts. The development of nonprecious metal intermetallic compounds, in which active sites are adjustable in the local structures and electronic properties embedded within a distinct framework, holds immense potential in enhancing catalytic efficacy and stability. Herein, we report that nickel-based silicides catalysts, RNiSi (R = Ca, La, and Y), afford high efficiency in the selective hydrogenation of maleic anhydride.
View Article and Find Full Text PDFSurface State Control of Apatite Nanoparticles by pH Adjusters for Highly Biocompatible Coatings.
ACS Appl Mater Interfaces
January 2025
Department of Materials Science and Technology, Nagaoka University of Technology, 1603-1 Kamitomioka, Nagaoka, Niigata 940-2188, Japan.
Apatite nanoparticles are biocompatible nanomaterials, so their film formation on biodevices is expected to provide effective bonding with living organisms. However, the biodevice-apatite interfaces have not yet been elucidated because there is little experimental evaluation and discussion on the nanoscale interactions, as well as the apatite surface reactivities. Our group has demonstrated the biomolecular adsorption properties on a quartz crystal microbalance with dissipation (QCM-D) sensor coated with apatite nanoparticles, demonstrating the applicability of apatite nanoparticle films on devices.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!