A new chelating polymeric sorbent has been developed using Merrifield chloromethylated resin anchored with quinoline-8-ol (HQ). The modified polymeric resin was characterized by FT-IR spectroscopy and elemental analysis. The HQ anchored resin showed superior binding affinity for U(VI) over Th(IV) and La(III). The influence of various physicochemical parameters on the recovery of U(VI) were optimized by both static and dynamic methods. The phase exchange kinetic studies performed for U(VI) revealed that <5min was sufficient for reaching equilibrium metal ion sorption. The maximum sorption capacity of HQ anchored resin for U(VI) was found to be 120.30mgg(-1) of resin which is higher than other solid phase extraction sorbents reported so far excepting N,N-dibutyl, N'-benzoyl thiourea sorbed Amberlite XAD-16. The developed HQ anchored polymeric resin is highly selective as none of the extraneous species were found to have any deleterious effect. Solid phase extraction (SPE) studies performed using HQ anchored polymeric resin offered enrichment factor of 100 and the lowest concentration below which recoveries become non-quantitative is 5mugl(-1). The accuracy of the developed SPE method in conjunction with Arsenazo III procedure was tested by analyzing marine sediment (MESS-3) and soil (IAEA-Soil 7) reference materials. Furthermore, the above procedure has been successfully employed for the analysis of real soil and sediment samples.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.talanta.2005.04.019 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
22 months follow-up of deep marginal acquisition with thermacut bur in management of deep subgingival interproximal carious lesions: a case report.
BMC Oral Health
January 2025
Professor of Conservative Dentistry, Faculty of Dentistry, Cairo University, Giza, Egypt.
Background: Minimally invasive dentistry is now becoming the forefront of restorative dentistry, involving less traumatic treatment protocols, conservation of tooth structure and surrounding tissues, enhancing the long-term survivability of treated teeth, and improving the overall quality of life for patients.
Objective: The current case report was conducted to evaluate acquiring deep subgingival interproximal carious lesions by the mean of thermacut bur gingivectomy, in terms of patient satisfaction through pain evaluation, Bleeding on Probing, Pocket Depth, Crestal Bone Level evaluation, and restoration evaluation using modified USPHS criteria.
Material And Methods: A patient with a deep proximal cavity in the posterior tooth was thoroughly examined and underwent Thermacut Bur Gingivectomy (TBG) after caries removal followed by direct resin composite restoration of the prepared cavity.
Home-use agents in the treatment of dentin hypersensitivity: clinical effectiveness evaluation with different measurement methods.
Clin Oral Investig
January 2025
Faculty of Dentistry, Department of Restorative Dentistry, Çanakkale Onsekiz Mart University, Çanakkale, 17100, Turkey.
Objectives: This study aimed to evaluate the effectiveness of home-use desensitizing agents over an 8-week period by comparing them using different measurement methods.
Methods: A randomized, controlled clinical trial was conducted with 180 individuals aged between 18 and 70 who clinically diagnosed dentin hypersensitivity (DH) in two or more non-adjacent teeth. Subjects who met the inclusion criteria (n = 164) were randomly allocated into five test groups-using Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), Arginine, Novamin, Propolis, and Potassium nitrate-and a control group using standard fluoride toothpaste.
Integrating 3D printing of biomaterials with nitric oxide release.
Biomater Sci
January 2025
Institute of Chemistry, University of Campinas, UNICAMP, Campinas 13083-970, São Paulo, Brazil.
The pivotal roles played by nitric oxide (NO) in tissue repair, inflammation, and immune response have spurred the development of a wide range of NO-releasing biomaterials. More recently, 3D printing techniques have significantly broadened the potential applications of polymeric biomaterials in biomedicine. In this context, the development of NO-releasing biomaterials that can be fabricated through 3D printing techniques has emerged as a promising strategy for harnessing the benefits of localized NO release from implantable devices, tissue regeneration scaffolds, or bandages for topical applications.
View Article and Find Full Text PDFRevealing the Dynamics of Sustainable Epoxy-Acrylate Networks from Recycled Plastics Blends and Oligomeric Lignin Precursors.
ChemSusChem
January 2025
VITO NV, Match Unit, BELGIUM.
The growing pursuit of carbon circularity in material fabrication has led to the increased use of recycled and biobased resources, especially in epoxy resin systems. Fossil-based bisphenols are being replaced with recycled bisphenol A (r-BPA) and lignin derivatives, both derived from previous processes. In this study, r-BPA was chemically recycled from end-of-life televisions, then converted into r-DGEBA and r-DAGBA through glycidylation and acrylic acid ring-opening.
View Article and Find Full Text PDFCarbon dot embedded hybrid microgel from synthesis to sensing: Experimental and theoretical approach.
Anal Chim Acta
February 2025
Department of Chemistry and Centre of Advanced Studies in Chemistry, Panjab University, Chandigarh, 160014, India; Department of Applied Chemistry, Maulana Abul Kalam Azad University of Technology, Simhat, Haringhata, West Bengal, 741249, India. Electronic address:
Background: The intellectual progress in fabricating artificial probes for selective appraisal of biologically admissible amino acids has displayed exponential growth in recent era.The neoteric era in material science has witnessed the significant application of carbon quantum dots (CQDs). However, the hybrid microgel of CQDs was less explored.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!