The sorption of U(VI) by N, N-dibutyl, N'-benzoylthiourea (DBBT) impregnated resin has been studied. DBBT impregnated resin was prepared by direct adsorption of chelating ligand onto macroporous support, Amberlite XAD-16. The adsorption of DBBT on the macroporous support is shown by FTIR spectroscopy to be the result of only weak chelating ligand-support interactions. Parameters such as the pH effect on the sorption of uranium, the sorption capacity of the impregnated resin, the stripping of uranium and the effect of coexisting ions were investigated by batch experiments. The results demonstrated that uranium(VI) ions, at pH 4.5-7 could be sorbed completely using 0.1 g Amberlite XAD-16 resin loaded with DBBT. The sorption capacity of the impregnated resin is 0.90 mmol uranium(VI) g(-1). Quantitative recovery of U(VI) is achieved by stripping with 0.1 M HNO(3). The method was applied to the determination of uranium in synthetic samples. The precision of the method was 2.4 RSD% in a concentration of 1.20 mug ml(-1) for ten replicate analysis.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/s0039-9140(01)00476-3 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Gold(III) Ions Sorption on Amberlite XAD-16 Impregnated with TBP After Leaching Smart Card Chips.
Molecules
January 2025
Department of Inorganic Chemistry, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Skłodowska University, Maria Curie-Skłodowska Sq. 2, 20-031 Lublin, Poland.
Owing to the intensive development of electrical and electronic equipment, there is an increasing demand for precious metals, which are often used for its production. Due to their scarce supply, it is important to recover them from secondary sources. A promising way to recover precious metals are impregnated resins.
View Article and Find Full Text PDFThe Effect of Textile Structure Reinforcement on Polymer Composite Material Mechanical Behavior.
Polymers (Basel)
December 2024
Faculty of Technology, Goce Delcev University, Krste Misirkov 10-A, P.O. Box 201, 2000 Shtip, North Macedonia.
Investigating the impact of textile structure reinforcement on the mechanical characteristics of polymer composites produced by the compression molding technique was the goal of this work. An epoxy resin system served as the matrix, and various woven (plain, twill, basket), nonwoven (mat), and unidirectional (UD) textile structures made from E-glass fibers were employed as reinforcement elements. Compression molding of pre-impregnated textile materials (prepregs) was used to create the composites.
View Article and Find Full Text PDFSelective Scandium Elution from DEHPA-Impregnated Ion-Exchange Resin After Metal Loading from Acidic Chloride Solutions.
Materials (Basel)
December 2024
Laboratory of Metallurgy, School of Mining and Metallurgical Engineering, National Technical University of Athens, Iroon Polytechniou 9 Str., Zografou Campus, 15773 Athens, Greece.
This paper investigates the elution behavior of scandium from DEHPA (Di-(2-ethylhexyl) phosphoric acid)-impregnated resins that proceed with metal loading from acidic chloride solutions. DEHPA resins stem from their recognized selectivity for Sc extraction from acidic solutions. This study focuses on the elution process after ion-exchange extraction and examines various elution systems to achieve selective Sc recovery.
View Article and Find Full Text PDFA review of cellulose and lignin contained rattan materials: Structure, properties, modifications, applications and perspectives.
Int J Biol Macromol
December 2024
Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China. Electronic address:
Rattan is a multi-purpose plant resource in the tropical forest treasure house. With its good technological characteristics, it has become an excellent material for the preparation of industry. The original rattan is an important forest product second only to wood and bamboo.
View Article and Find Full Text PDFWeak Fiber Bragg Grating Array-Based In Situ Flow and Defects Monitoring During the Vacuum-Assisted Resin Infusion Process.
Sensors (Basel)
November 2024
School of Information Engineering, Wuhan University of Technology, Wuhan 430070, China.
Monitoring of real-time flow and defects in the vacuum-assisted resin infusion (VARI) process can provide important guidelines for full impregnation of dry reinforcement. A weak fiber Bragg grating array was employed to obtain quasi-distributed monitoring results in real-time. Sensitivity testing of different kinds of coated optical fiber sensors (OFs) was carried out first, and the polyacrylate-coated OF showed a greater wavelength-shift response than the polyimide-coated one.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!