The effect of hydrodynamic forces on animal cell cultures, while extensively studied, still lacks significant, fundamental understanding. A previous manuscript reported on the acute exposure of CHO cells to hydrodynamic forces in a second generation convergent-divergent microfluidic device (Mollet et al., 2007). In this study, the use of this device is extended in a proof of concept system in which suspended animal cells, grown in a typical bioreactor, are subjected to chronic exposure of moderately high levels of hydrodynamic forces by way of a continuous recycle loop between the bioreactor and the microfluidic device. A strain of CHO cells (CHO-6E6) was grown in a batch culture under controlled pH, temperature, and dissolved oxygen conditions. At mid exponential stage of growth in the bioreactor the recycle flow was initiated. The cells either stopped growing or started dying at EDR values that were significantly lower (one to two orders of magnitude) than those previously reported to kill cells from a single, acute exposure. These observations allow further refinement in the design of bioprocess equipment since it provides a more accurate threshold, above which one does not want to subject animal cells to continuous exposure to specific levels of hydrodynamic forces.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/bit.22146 | DOI Listing |
Curr Biol
December 2024
Université Paris Cité, CNRS, Institut Jacques Monod, 75013 Paris, France; Equipe Labellisée LIGUE Contre le Cancer, 75013 Paris, France. Electronic address:
The regulation of mitotic spindle positioning and orientation is central to the morphogenesis of developing embryos and tissues. In many multicellular contexts, cell geometry has been shown to have a major influence on spindle positioning, with spindles that commonly align along the longest cell shape axis. To date, however, we still lack an understanding of how the nature and amplitude of intracellular forces that position, orient, or hold mitotic spindles depend on cell geometry.
View Article and Find Full Text PDFSci Rep
January 2025
School of Chinese Materia Medica, Beijing University of Chinese Medicine, Beijing, 102488, China.
The main advantages of microneedles are precise drug delivery through human skin, minimal tissue damage and painlessness. We conducted structural analysis and skin puncture studies of hollow microneedles using ANSYS for three materials: Hafnium Dioxide (HfO), Polyglycolic acid (PGA) and Polylactic acid (PLA). Firstly, we selected three lengths, three tip diameters and three base diameters to conduct a L(3) orthogonal experiment.
View Article and Find Full Text PDFJ Colloid Interface Sci
December 2024
School of Minerals Processing and Bioengineering, Central South University, Changsha 410083, PR China. Electronic address:
The ecological risk of microplastics (MPs) is raising concern about their transport and fate in aquatic ecosystems. The capture of MPs by bubbles is a ubiquitous natural phenomenon in water-based environment, which plays a critical role in the global cycling of MPs, thereby increasing their environmental threats. However, the nanoscale interaction mechanisms between bubbles and MPs underlying MPs transport by bubbles in complex environmental systems remain elusive.
View Article and Find Full Text PDFBiomimetics (Basel)
December 2024
College of Oceanography, Hohai University, Nanjing 210024, China.
In order to figure out the wall effect on the propulsive property of an auto-propelled foil, the commercial open-source code ANSYS Fluent was employed to numerically evaluate the fluid dynamics of flexible foil under various wall distances. A virtual model of NACA0015 foil undergoing travelling wavy motion was adopted, and the research object included 2D and 3D models. To capture the foil's moving boundary, the dynamic grid technique coupled with the overlapping grid was utilized to realize the foil's positive deformation and passive forward motion.
View Article and Find Full Text PDFJ Colloid Interface Sci
December 2024
Department of Chemical and Biomolecular Engineering, Case School of Engineering, Case Western Reserve University, Cleveland, OH 44106, United States.
We present a study combining experimental measurements, theoretical analysis, and simulations to investigate core-shell microcapsules interacting with a solid boundary, with a particular focus on understanding the short-range potential energy well arising from the tethered force. The microcapsules, fabricated using a Pickering emulsion template with a cinnamon oil core and calcium alginate shell, were characterized for size (∼5-6μm in diameter) and surface charge (∼-20mV). We employed total internal reflection microscopy and particle tracking to measure the microcapsule-boundary interactions and diffusion, from which potential energy and diffusivity profiles were derived.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!