A method was developed for the determination of tin in human serum by radiochemical neutron activation analysis, using the long-lived radioisotope Sn(T1/2 = 115.09 days). This radioisotope decays to a daughter isotope 113mIn, the most suitable nuclide for counting (T1/2 = 1.658 h, gamma-ray of 391.7 keV). Experience showed that, with the exception of the serum samples with the lowest tin levels, in the experimental conditions of the present study tin could mostly also be determined by using its radioisotope 117mSn(T1/2 = 13.61 days, gamma-ray of 158.5 keV). Samples were collected and prepared by using the procedure elaborated by the authors, which proved its effectiveness in preventing significant sample contamination on several occasions. Because samples had to be irradiated at 10(14) n.cm-2.s-1, dry ashing was necessary. After irradiation, tin was separated by solvent extraction of tin(IV) iodide from a sulfuric acid-ammonium iodide solution with toluene. The dry ashing and solvent extraction steps were exhaustively tested by means of radioactive tracer experiments whereas the accuracy and precision of the analytical method were thoroughly checked by analyzing biological reference materials (Bowen's kale powder, the NBS' bovine liver, the NBS' nonfat milk powder, and the "second-generation" biological reference material--freeze-dried human serum--for trace element determinations, developed by the authors).(ABSTRACT TRUNCATED AT 250 WORDS)

Download full-text PDF

Source
http://dx.doi.org/10.1021/ac00011a016DOI Listing

Publication Analysis

Top Keywords

determination tin
8
tin human
8
serum radiochemical
8
radiochemical neutron
8
neutron activation
8
activation analysis
8
dry ashing
8
solvent extraction
8
biological reference
8
human blood
4

Similar Publications

Multilayer laminated films are widely used as food packaging materials. The substances contained in these films have the potential to migrate into food in contact, but the actual situation is unknown. In this study, we first determined the contents of 24 elements in 42 food laminate bags by ICP-OES and ICP-MS.

View Article and Find Full Text PDF

In the blast furnace and basic oxygen furnace route, pig iron and steel scrap are used as resources for steel production. The scrap content can consist of many different types of scrap varying in origin and composition. This makes it difficult to compile the scrap mix and predict the future chemical analysis in the converter.

View Article and Find Full Text PDF

Accurately predicting the calving time in cattle is essential for optimizing livestock management and ensuring animal welfare. Our research focuses on developing a robust system for calving cattle classification and calving time prediction, utilizing 12-h trajectory data for 20 cattle. Our system classifies cattle as abnormal (requiring human assistance) or normal (not requiring assistance) and predicts calving times based on their individual behaviors.

View Article and Find Full Text PDF

The current research discusses polymer conjugation, formulation development, and evaluation of sorafenib-loaded polymeric nanomicelles of conjugated soluplus (solu-tin) and polymeric mixed nanomicelles of conjugated soluplus (solu-tin) with conjugated poloxamer 188 (polo-tin) for site-specific posterior segment delivery to the retina in managing retinoblastoma. Firstly, the soluplus and poloxamer 188 were conjugated with biotin by Fischer esterification reaction and evaluated by FTIR and H NMR for confirmation of covalent bond formation involving the carboxyl group of biotin and hydroxyl group of polymers. Secondly, the sorafenib-loaded solu-tin nanomicelles and mixed nanomicelles of solu-tin with polo-tin were formulated by the thin film hydration method.

View Article and Find Full Text PDF

Structural and photoelectric properties of p-i-n photodiodes based on GeSiSn/Si multiple quantum dots both on Si and silicon-on-insulator (SOI) substrates were investigated. Elastic strained state of grown films was demonstrated by x-ray diffractometry. Annealing of p-i-n structures before the mesa fabrication can improve the ideality factor of current-voltage characteristics.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!