There is an increasing demand to improve dentofacial esthetics in the adult population. This demand usually requires a close collaboration within the various disciplines of dentistry and the patient at every stage of the therapy. The materials and techniques used by these interdisciplinary clinicians must be conservative and minimally invasive. Fiber-reinforced composite technology offers such solutions for chairside applications. This case report presents two cases where fiber-reinforced ribbon and composite complex was used in a multidisciplinary approach to improve esthetics.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.4103/0970-9290.42965 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Improving the thermal performance of PVC windows with pultruded thermoplastic reinforcement.
Sci Rep
January 2025
Center for Materials Technologies, Skolkovo Institute of Science and Technology, Moscow, Russia.
Today, composite profiles of constant cross section are widely used in advanced engineering structures. The use of composite profiles in window and door structures can reduce thermal bridging and reduce energy consumption for heating and cooling. This article focuses on the production of new, thermoplastic-based structural pultruded profiles and their application in a PVC (polyvinylchloride) window structure as a reinforcement.
View Article and Find Full Text PDFFunctionally Graded Oxide Scale on (Hf,Zr,Ti)B Coating with Exceptional Ablation Resistance Induced by Unique Ti Dissolving.
Adv Sci (Weinh)
January 2025
Shaanxi Key Laboratory of Fiber Reinforced Light-Weight Composites, State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an, 710072, China.
Multicomponent Ti-containing ultra-high temperature ceramics (UHTCs) have emerged as more promising ablation-resistant materials than typical UHTCs for applications above 2000 °C. However, the underlying mechanism of Ti improving the ablation performance is still obscure. Here, (Hf,Zr,Ti)B coatings are fabricated by supersonic atmospheric plasma spraying, and the effects of Ti content on the ablation performance under an oxyacetylene flame are investigated.
View Article and Find Full Text PDFHigh-Resolution TG-TOFMS Coupled with Principal Component Analysis and Kendrick Mass Defect Analysis: Elucidation of Molecular-Scale Degradation Behavior of Glass Fiber Reinforced Polypropylene during Thermo-Oxidative Degradation.
Anal Chem
January 2025
Research Institute for Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Higashi, Tsukuba 305-8565, Japan.
This study presents a novel approach that combines thermogravimetric analysis with time-of-flight mass spectrometry (TG-TOFMS), principal component analysis (PCA), and Kendrick mass defect (KMD) analysis─referred to as TG-PCA-KMD─to investigate molecular-scale structural changes and quantitatively assess the progression of thermo-oxidative degradation in glass fiber reinforced polypropylene (GF/PP). TG-TOFMS enables the simultaneous and sensitive detection of both structural changes due to thermo-oxidative degradation and compositional changes in the filler and matrix. PCA and KMD analysis are crucial for identifying specific ion series derived from the degraded PP matrix in the high-resolution mass spectra obtained through TG-TOFMS.
View Article and Find Full Text PDFA Taguchi-based study on the control factors of reinforced composites with the fiber of coir and pineapple leaves.
Heliyon
January 2025
Department of Industrial and Production Engineering, Bangladesh Army University of Science and Technology (BAUST), Saidpur, Cantonment, Bangladesh.
The use of composite materials, whether metallic or non-metallic, is becoming more popular nowadays because of some of their superior characteristics compared to the use of wood and metallic materials alone. From this perspective, a new natural fiber reinforced composite by varying the fiber orientation was developed in this study using coir and pineapple leaf fiber. This work uses the Taguchi method to investigate the different effects of control factors on mechanical and physical characteristics of the fabricated natural fiber-based composites.
View Article and Find Full Text PDFEffect of Depth of Cut and Number of Layers on the Surface Roughness and Surface Homogeneity After Milling of Al/CFRP Stacks.
Materials (Basel)
January 2025
Faculty of Mechanical Engineering, Poznan University of Technology, Pl. Marii Skłodowskiej-Curie 5, 60-965 Poznań, Poland.
A multilayer structure is a type of construction consisting of outer layers and a core, which is mainly characterized by high strength and specific stiffness, as well as the ability to dampen vibration and sound. This structure combines the high strength of traditional materials (mainly metals) and composites. Currently, sandwich structures in any configurations (types of core) are one of the main directions of technology development and research.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!