Study Design: The axial pullout strength of pedicle screws that were at different temperatures when inserted was compared in calf vertebrae.

Objective: To determine if insertional temperature of the screw itself affects pullout strength.

Summary Of Background Data: Fixation stability of pedicle screws depend on several factors. The development of alternate insertion techniques and screw designs were used to improve the stability. Polymethylmethacrylate and calcium sulfate augmentation have been shown to be viable options for improving fixation; but have the potential disadvantages.

Methods: Three cadaveric thoracic calf spines were instrumented between T1-T10 bilaterally with one type of pedicle screws stored at different insertional temperatures. The axial pullout tests were performed at cross head speed of 5 mm/min. Pullout loads and displacement were recorded at 1/20 seconds intervals until failure occurred.

Results: The highest pullout force was obtained with the screws inserted at 4 degrees C. These screws had a 19% increase in pullout strength compared with the screws inserted at 24 degrees C. The highest force/torque proportion was gained in the same group as 0.30 kn/Nm.

Conclusion: The technique showed increased pullout force with the screws inserted at 4 degrees C. Using pedicle screws stored at 4 degrees C before instrumentation, seems reasonable in an attempt to obtain a better bone-screw interface.

Download full-text PDF

Source
http://dx.doi.org/10.1097/BRS.0b013e31817c4f9cDOI Listing

Publication Analysis

Top Keywords

pedicle screws
20
screws inserted
16
pullout strength
12
inserted degrees
12
screws
9
insertional temperature
8
pullout
8
strength pedicle
8
axial pullout
8
screws stored
8

Similar Publications

Purpose Of The Study: The annual number of spinal fusion procedures has been increasing and is well documented worldwide. The O-arm is slowly becoming the standard for transpedicular screw insertion. The accuracy and safety of this method have been confirmed by many studies.

View Article and Find Full Text PDF

Evaluation of Pedicle Screw Position on Computerized Tomography Using Three-Dimensional Reconstruction Software.

Medicina (Kaunas)

December 2024

Spine Center and Department of Orthopedic Surgery, Seoul National University College of Medicine, Seoul National University Bundang Hospital, Seongnam 13620, Republic of Korea.

: Recent advances in intraoperative navigation systems have improved the accuracy of pedicle screw placement in spine surgery. However, many hospitals have limited access to these advanced technologies due to resource constraints. In such settings, postoperative computed tomography (CT) evaluation remains crucial for assessing screw placement and related potential complications.

View Article and Find Full Text PDF

Objective: We aimed to investigate the incidence of delayed-onset neurological deficits (DONDs), DOND-related reoperation rates following adult spinal deformity (ASD) surgery, and efficacy of transverse process hooks (TPHs) at the uppermost instrumented vertebra (UIV) compared to pedicle screws (PSs).

Methods: We included 90 consecutive patients who underwent instrumented fusion from the sacrum to the distal thoracic spine for ASD, with a minimum follow-up of 24 months. Clinical and radiological outcomes were compared between 33 patients in the TPH group and 57 patients in the PS group, using the Scoliosis Research Society-22 Outcomes questionnaire (SRS-22), Medical Outcomes Study Questionnaire Short-Form 36 (SF-36), and various spinal sagittal parameters.

View Article and Find Full Text PDF

Pedicle screws are commonly used for vertebral instrumentation, and a postoperative computed tomography (CT) scan is used to evaluate their position within the pedicle. Medial pedicle screw breaching occurs in 20%-40% of cases. This study investigated the correlation between radiographically evident medial breaching and the incidence of nerve injury, shedding light on the clinical implications.

View Article and Find Full Text PDF

The purpose of this study was to present the surgical technique of Unilateral Biportal Endoscopic (UBE) decompression combined with percutaneous pedicle screws for the treatment of thoracolumbar burst fractures with secondary spinal stenosis. Thoracolumbar burst fracture is a common traumatic disease in spinal surgery. In the Arbeitsgemeinschaft für Osteosynthesefragen (AO) classification of thoracolumbar fractures, Type A fractures have the highest incidence, accounting for about 70%, with A1 and A3 types being the most common.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!