Defect detection and localization in orthotropic wood slabs by inversion of dynamic surface displacements.

The nondestructive evaluation inversion and generalized force-mapping techniques developed and demonstrated for isotropic thin plates by Bucaro et al. [(2004). "Detection and localization of inclusions in plates using inversion of point actuated surface displacements," J. Acoust. Soc. Am. 115, 201-206] are extended to the case of orthotropic plates. The extended techniques are applied to a finite-element generated numerical database for point excited wooden slabs with and without an internal defect at 5 and 10 kHz. Operation of the original isotropic algorithms on the wood surface displacements is shown to fail in recovering the uniform elastic parameters or in detecting and locating the defect. The new algorithms based on the wave equation for a thin, orthotropic plate successfully convert the surface displacements on the uniform wooden slab to elastic parameter maps which serve to detect and localize the defect in the flawed plate. The results, particularly at the higher frequency, indicate that the onset of failure in the thin plate approximation impacts both the inversion and the generalized force-mapping accuracy. However, in this case use of the inversion algorithm to obtain modified wave equation coefficients followed by operation of the force-mapping algorithm with these new parameters inserted is shown to successfully mitigate this effect.