We report on a single-end diode-pumped waveguide laser providing output power in excess of 20 mW with 17% slope efficiency in robust single longitudinal and transverse mode operation at 1533.5 nm. The active medium was an Er:Yb-doped waveguide only 9-mm long fabricated by Ag-Na ion-exchange in a phosphate glass. The overall cavity length including butt-coupled fiber-Bragg-grating mirrors was <60 mm. We also report on high power waveguide lasers providing more than 160 mW output power and 46% slope efficiency in multimode operation. Feasibility of high power single mode waveguide lasers based on ion-exchange technology in phosphate glasses is also experimentally investigated by using a 50-mm long active waveguide specially designed for efficient single-end pumping.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/oe.16.012334 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
All-inorganic perovskite materials have been widely used in various devices, including lasers, light-emitting diodes (LEDs), and solar cells, due to their exceptional optoelectronic properties. Devices utilizing high-quality single crystals are anticipated to achieve significantly enhanced performance. In this work, we present a high-performance vertical cavity surface emitting laser (VCSEL) based on a single-crystal CsPbBr microplatelet, fabricated through a simple solution process and sandwiched between two distributed Bragg reflector (DBRs).
View Article and Find Full Text PDFA novel, to the best of our knowledge, optical fiber whispering-gallery mode (WGM) sensor for simultaneously measuring humidity and temperature is proposed and investigated. The proposed sensor is realized by a polyvinyl alcohol (PVA)-coated capillary tube coupling with an optical single-mode fiber (SMF), which is integrated with a fiber Bragg grating (FBG). The as-fabricated sensor can be used not only for relative humidity (RH) sensing but also for temperature detection.
View Article and Find Full Text PDFIn this paper, we propose and demonstrate an integrated polarization-insensitive single-mode filter (SMF) on a 340 nm silicon-on-insulator (SOI) platform, by introducing two lateral coupling waveguides to couple high-order modes from central single-mode waveguide to lateral waveguides. The experimental results show that the excess loss is <0.29 dB and the extinction ratio is >20 dB with a broad bandwidth of 136 nm for the fabricated SMF with a compact footprint of <13 µm.
View Article and Find Full Text PDFIn this Letter, we show the attraction of a microbubble at a fiber end face by the solute Marangoni force. The microbubble is formed by partial filling of an ethanol-water mixture in the microcavity that is spliced to the end face of a single-mode fiber. Due to different surface tension of ethanol and water, the uneven temperature gradient induced by a laser causes the non-uniform distribution of ethanol-water molecules on the bubble surface.
View Article and Find Full Text PDFThe control of temporal noise of the pump could add an additional degree of freedom to manipulate the spectrum of continuous-wave (CW) pumped SC generation. In this paper, we experimentally tailor the CW-pumped supercontinuum (SC) generation in a cascaded Raman random fiber laser (CRRFL) based on a 1 µm pump with tunable temporal dynamics. The pump is based on a spectrally filtered ytterbium-doped random fiber laser (YRFL) seed laser, which can be amplified to a 10 W level with the tunable temporal noise.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!