We report on a new experimental method for enhanced backscattering spectroscopy (EBS) of strongly scattering media over a bandwidth from 530-1000 nm. The instrument consists of a supercontinuum light source and an angle-dependent detection system using a fiber-coupled grating spectrometer. Using a combination of two setups, the backscattered intensity is obtained over a large angular range and using circularly polarized light. We present broadband EBS of a TiO(2) powder and of a strongly scattering porous GaP layer. In combination with theoretical model fits, the EBS system yields the optical transport mean free path over the available spectral window.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/oe.16.001222 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
The Challenges and Opportunities for Performance Enhancement in Resonant Fiber Optic Gyroscopes.
Sensors (Basel)
January 2025
Department of Electrical Engineering, Indian Institute of Technology Madras, Chennai 600036, India.
In the last decade, substantial progress has been made to improve the performance of optical gyroscopes for inertial navigation applications in terms of critical parameters such as bias stability, scale factor stability, and angular random walk (ARW). Specifically, resonant fiber optic gyroscopes (RFOGs) have emerged as a viable alternative to widely popular interferometric fiber optic gyroscopes (IFOGs). In a conventional RFOG, a single-wavelength laser source is used to generate counter-propagating waves in a ring resonator, for which the phase difference is measured in terms of the resonant frequency shift to obtain the rotation rate.
View Article and Find Full Text PDFDelay Minimization for BAC-NOMA Offloading in UAV Networks.
Sensors (Basel)
December 2024
AVIC Aeronautics Computing Technology Research Institute, Xi'an 710069, China.
The rapid deployment and enhanced communication capabilities of unmanned aerial vehicles (UAVs) have enabled numerous real-time sensing applications. These scenarios often necessitate task offloading and execution under stringent transmission delay constraints, particularly for time-critical applications such as disaster rescue and environmental monitoring. This paper investigates the improvement of MEC-based task offloading services in energy-constrained UAV networks using backscatter communication (BackCom) with non-orthogonal multiple access (BAC-NOMA).
View Article and Find Full Text PDFIntelligent Pattern Recognition Using Distributed Fiber Optic Sensors for Smart Environment.
Sensors (Basel)
December 2024
Centre for Photonic Devices and Sensors, Department of Engineering, University of Cambridge, Cambridge CB3 0FA, UK.
Distributed fiber optic sensors (DFOSs) have become increasingly popular for intrusion detection, particularly in outdoor and restricted zones. Enhancing DFOS performance through advanced signal processing and deep learning techniques is crucial. While effective, conventional neural networks often involve high complexity and significant computational demands.
View Article and Find Full Text PDFDetailed Analysis of the Debris-Fretting Damage Areas on Coated Fuel Cladding.
Materials (Basel)
January 2025
Centrum Výzkumu Řež s.r.o., Hlavní 130, 250 68 Husinec-Řež, Czech Republic.
Fuel failure caused by fretting damage to cladding remains a relevant issue despite decades of research and development aimed at enhancing the physical parameters of fuel. This paper presents the results of experiments conducted at the Research Centre Řež on Zr-1%Nb alloy tube specimens covered with protective coatings made of chromium (Cr) and nitrogen (N) compounds. The experiments involved debris-fretting tests under dry conditions at room temperature as well as microscopic measurements of groove depths.
View Article and Find Full Text PDFThe Effect of H Fluence Irradiation on the Optical, Structural, and Morphological Properties of ZnO Thin Films.
Materials (Basel)
December 2024
Departamento de Física, Facultad de Ciencias, Universidad Nacional Autónoma de México, Ciudad de México 04510, Mexico.
Polycrystalline zinc oxide (ZnO) thin films were deposited on soda-lime glass substrates using the chemical spray pyrolysis method at 450 °C. The samples were irradiated with 8 keV H ions at three different fluences using a Colutron ion gun. The effects of the irradiation on the structural, morphological, and optical properties were studied with different techniques, including Rutherford Backscattering Spectrometry (RBS), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Ultraviolet and Visible Spectroscopy (UV-Vis).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!