Risk assessment of biocides in roof paint. Part 1: experimental determination and modelling of biocide leaching from roof paint.

Environ Sci Pollut Res Int

UFT-Centre for Environmental Research and Technology, University of Bremen, Leobener Strasse, 28359 Bremen, Germany.

Published: May 2008

Background, Aim And Scope: Many surface coatings, including roof paints, contain biocides. It is generally not known to what extent roof paint biocides leach from the paint, and consequently, what concentration the biocide may attain in a rainwater collection system. To this end the leaching of specific biocides from a variety of German roof paints was investigated and the resulting concentrations in collected rain water were estimated.

Materials And Methods: A laboratory simulation was used to determine the time dependant leaching rate of the biocide from the paint into synthetic rainwater. The concentrations of biocide in the leachate were quantified using HPLC. The course of the leachate concentrations over time was fitted using a simple mathematical model. This was then used to estimate concentrations of biocides in a typical household rainwater collection system over time.

Results: Surprisingly, the biocides found in the paints did not always concur with the declared biocides. Concerning the modelling of runoff concentrations, it was found that--under the model assumptions--the rain intensity and cumulative raining time after application are the dominant factors influencing the concentration of the biocide. At the highest modelled rain intensity of 40 mm/hour it only takes about 2 hours to reach peak concentrations lower than 0.1 mg/L, at 0.3 mm/hour it takes about 10 hours to reach peak concentrations of 1.3, 0.9, 5.2 and 1.1 mg/L for terbutryn from Emalux paint, terbutryn from Südwest paint, carbendazim from Emalux paint, and carbendazim from MIPA paint, respectively.

Discussion: The results confirm that biocides leached from roof paint will be present in roof runoff. The highest estimated peak concentrations are close to the water solubility of the respective biocides. This indicates that the model assumption of a concentration independent leaching rate will tendentially lead to an overestimation of the leached concentrations under these circumstances. However, under most circumstances such as higher rain intensities, and longer time after peak concentrations have been reached, the runoff concentrations are far from the solubility limit, and therefore it is proposed that the model assumptions are tenable.

Conclusions: The leaching of biocides from roof paints can be roughly assessed using a relatively simple approach. The declaration of biocidal ingredients in roof paints should be improved and information on their biocide leaching behaviour should be made available. Furthermore, the estimations should be evaluated by a field study.

Recommendations And Perspectives: The leaching study indicated that the concentrations of selected biocides can reach significant levels, especially after low intensity rainfall. Taking into account the inherent biological activity of the substances under scrutiny, it can already be concluded that it is not advisable to use runoff water from roofs freshly painted with biocide containing roof paints. These results have been complemented by a literature search of biological effects of the investigated biocides, ecotoxicological tests with several species and a risk analysis for organisms exposed to runoff water. This will be presented in Part 2 of this contribution.

Download full-text PDF

Source
http://dx.doi.org/10.1065/espr2007.12.465DOI Listing

Publication Analysis

Top Keywords

roof paints
20
roof paint
16
peak concentrations
16
biocides
12
concentrations
12
roof
10
paint
10
biocides roof
8
biocide leaching
8
concentration biocide
8

Similar Publications

Should climate and health researchers accept funding from industries that profit from climate-damaging consumption? In this Personal View, we aim to ignite discussions on this key topic and to introduce a guideline to possibly help climate and health researchers grappling with this complex question. Drawing from existing tools focused on other public health issues and the conclusions of the 2023 Lancet Series on commercial determinants of health, we propose a guideline comprising six parts: meeting public health and climate goals; building credibility and trust; avoiding undue dependence on particular sources of funding; not inflating without good reason the public image of industry; embedding processes to ensure transparency and independence; and protecting the freedom to publish. We invite other climate and public health scientists to report their own experiences and provide feedback on this guideline.

View Article and Find Full Text PDF

In this study, the cooling effect below ambient air temperature, heat dissipation properties and heating energy efficacy of a superomniphobic self-cleaning (SSC) highly emissive (HE) coating were systematically investigated. Except at midday, the SSC-HE coating with an extremely high solar reflectance of 0.985 showed a better cooling effect than a 10-cm-thick polyurethane insulation layer.

View Article and Find Full Text PDF

Environmental transport and sorting of glass retroreflective microbeads and their potential as proxies for road marking paints.

Sci Total Environ

December 2024

School of Geography, Earth and Environmental Sciences, University of Plymouth, Drake Circus, Plymouth PL4 8AA, United Kingdom of Great Britain and Northern Ireland.

Road marking paints are a potentially important contributor to the global microplastic pool but very little reliable information is available on their erosion or environmental distributions. As potential carriers of or proxies for road paints, we determine the concentrations and sorting of retroreflective glass microbeads in marking materials and in fractionated (< 5 mm) local dusts, soils and sediments. As an aid to our investigation, we also determine the concentrations of metals of geochemical significance or components of road paint pigments in markings and geosolids.

View Article and Find Full Text PDF

A 72-year-old man with idiopathic pulmonary fibrosis (IPF) was on home oxygen therapy at 1 L/min. He fell approximately 3 m onto a concrete surface while painting the roof of his home and was emergently transported to a local hospital due to pain in his lower back and right lower limb. His initial Krebs von den Lungen level decreased with medical treatments but has shown an increasing trend over the past three respiratory outpatient visits.

View Article and Find Full Text PDF

Smart building block with colored radiative cooling devices and quantum dot light emitting diodes.

Nanoscale

January 2024

Department of Materials Science and Engineering, Korea University 145, Anam-ro Seongbuk-gu, Seoul, 02841, Republic of Korea.

In this study, we design a smart building block with quantum-dot light-emitting diode (QLED) and colored radiative cooling devices. A smart light-emitting building block is fabricated using a bottom-inverted QLED that emits green light, an insulating layer, and a top radiative cooling structure that emits mid-infrared light. The heat generated during QLED operation is measured and analyzed to investigate the correlation between heat and QLED degradation.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!