We demonstrate a compact all-fiber sampling probe for an optical coherence tomography (OCT) system. By forming a focusing lens directly on the tip of an optical fiber, a compact sampling probe could be implemented. To simultaneously achieve a sufficiently long working distance and a good lateral resolution, we employed a large-mode area photonic crystal fiber (PCF) and a coreless silica fiber (CSF) of the same diameters. A working distance of up to 1270 microm, a 3 dB distance range of 2210 microm, and a transverse resolution of 14.2 microm were achieved with the implemented PCF lensed fiber; these values are comparable to those obtainable with a conventional objective lens having an NA of 0.25 (10 x). The performance of the OCT system equipped with the proposed PCF lensed fiber is presented by showing the OCT images of a rat finger as a biological sample and a pearl as an in-depth sample.

Download full-text PDF

Source
http://dx.doi.org/10.1364/ao.47.001510DOI Listing

Publication Analysis

Top Keywords

lensed fiber
12
optical coherence
8
coherence tomography
8
sampling probe
8
oct system
8
working distance
8
pcf lensed
8
fiber
5
fiber probes
4
probes designed
4

Similar Publications

Availability of a suitable tool for carrying out non-invasive measurement of Raman signatures in situ, from biological tissues having low Raman cross section is a clinically unmet need faced with manifold challenges. A Raman probe can prove to be an invaluable component of clinical Raman diagnostic systems. We present development of a Raman probe capable of measuring artefact free Raman spectra of biological tissues in situ.

View Article and Find Full Text PDF

Ultra short pulse Ti:sapphire lasers, crucial for most demanding applications, have traditionally been complex and costly due to their pump sources. GaN-based laser diodes offer new prospects for pumping, yet challenges persist in achieving sufficient Ti:sapphire output power and beam quality. We introduce what we believe to be a novel approach using pulsed blue laser diode pumping of a Ti:sapphire amplifier.

View Article and Find Full Text PDF

We proposed a label-free method for the identification and classification of atherosclerosis plaques by combining optical coherence tomography (OCT) with ultraviolet autofluorescence spectroscopy (uFLS). By aligning the OCT source and the FLS excitation beams, we were able to illuminate the same spot on plaques fixed to the integrated probe, which underwent rotational scanning. This setup enabled the detection of both OCT images and uFLS spectra of the plaques in a co-localized manner.

View Article and Find Full Text PDF

Natural selection has driven arthropods to evolve fantastic natural compound eyes (NCEs) with a unique anatomical structure, providing a promising blueprint for artificial compound eyes (ACEs) to achieve static and dynamic perceptions in complex environments. Specifically, each NCE utilises an array of ommatidia, the imaging units, distributed on a curved surface to enable abundant merits. This has inspired the development of many ACEs using various microlens arrays, but the reported ACEs have limited performances in static imaging and motion detection.

View Article and Find Full Text PDF

The impact of thermal lensing (TL) on the transverse mode instability (TMI) threshold power in rod-type fiber amplifiers is investigated. Simulations are conducted with a 3D coupled mode analysis on a set of five scaled large pitch fiber (LPF) amplifiers. The LPF fibers are represented by surrogate step-index fibers (SIFs) with scaled cladding diameters, core diameters, and numerical apertures for a fixed normalized frequency V equal to 3.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!