Carbon NanoFibers (CNFs) with hierarchically structure have been immobilized onto Activated Carbon (AC) by impregnation with an aqueous solution of Fe(CH3COO)2, reduction and subsequent chemical vapor decomposition of ethylene. The morphology of the CNFs can be modulated by adjusting the pH of the Fe(CH3COO)2 solution used for impregnating the AC. A stable yield of 35% in the oxidative dehydrogenation of ethylbenzene to styrene was obtained at a temperature of 673 K, around 200 K lower than the current industrial process. The immobilized CNFs on AC catalysts combine the catalytic properties of the carbon nanofibers and the suprastructure of the AC host. The final material is an easy to handle active catalyst, with an open structure of immobilized CNFs avoiding the pressure drop problem, which is typically observed for fine powder forms of CNFs. The immobilized CNFs on AC are attractive for gas-phase fixed-bed industrial applications.

Download full-text PDF

Source
http://dx.doi.org/10.1166/jnn.2007.845DOI Listing

Publication Analysis

Top Keywords

carbon nanofibers
12
immobilized cnfs
12
immobilized activated
8
activated carbon
8
structure immobilized
8
cnfs
6
carbon
5
immobilized
5
novel catalyst
4
catalyst synthesis
4

Similar Publications

Carbon quantum dot-anchored polyaniline on electrospun carbon nanofibers as freestanding electrodes for symmetric solid-state supercapacitors.

Dalton Trans

January 2025

Key Laboratory for Photonic and Electronic Bandgap Materials, Ministry of Education, School of Physics and Electronic Engineering, Harbin Normal University, Harbin 150025, People's Republic of China.

A binder-free and freestanding electrode was designed by uniformly immobilizing carbon quantum dot (CQD)-anchored polyaniline (PANI) heterostructures onto electrospun carbon nanofibers (CNFs) a facile hierarchical assembly process. The fabricated freestanding CNF/PANI/CQD electrode exhibits a unique three-dimensional (3D) network nanostructure, which accelerates ion migration between the interior and surface of the electrode, thereby enhancing its charging and discharging performance. Moreover, the functional groups on the surface of CQDs could anchor PANI through possible chemical bonding, which not only improves the stability of the PANI/CQD heterojunction but also creates an additional conductive channel for the PANI polymer.

View Article and Find Full Text PDF

[This corrects the article DOI: 10.1039/C9RA10485B.].

View Article and Find Full Text PDF

Nonfullerene acceptors with carbon-oxygen-bridged fused nonacyclic donor units enable efficient organic solar cells.

Phys Chem Chem Phys

January 2025

State Key Laboratory of Powder Metallurgy, College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, P. R. China.

The power conversion efficiency (PCE) of an organic solar cell (OSC) mainly depends on the chemical structures and intrinsic properties of its active layer materials. The development of new nonfullerene acceptors (NFAs) has significantly boosted the PCEs of OSCs over the last decade. Herein, two carbon-oxygen-bridged fused nonacyclic donor units were developed to synthesize two NFAs, namely TTPIC-Ar and iTTPIC-Ar, respectively.

View Article and Find Full Text PDF

Biomass, as a source of lignocellulose, can be valorized into carbon micro/nanofibers for adsorbing greenhouse gas (GHGs) emissions, especially CO. This article is derived from systematic evidence evaluation of published studies, presenting new, innovative, and systemic approaches to lignocellulose-based carbon micro/nanofiber studies. The review covers a general overview of carbon micro/nanofiber studies, mapping chronicles of the studies, carbon micro/nanofiber types for CO uptake, carbon micro/nanofibers fabrication and characterization, obtained carbonaceous material activation and performances, regulatory frameworks, and sustainability.

View Article and Find Full Text PDF

Nanocellulose/activated carbon composite aerogel beads with high adsorption capacity for toxins in blood.

Int J Biol Macromol

January 2025

School of Chemistry, Chemical Engineering and Life Sciences, Wuhan University of Technology, Luoshi Road 122, Wuhan 430070, China; School of Materials Science and Engineering, Wuhan University of Technology, Luoshi Road 122, Wuhan 430070, China. Electronic address:

Activated carbon is extensively utilized in blood purification applications. However, its performance has been significantly limited by their poor blood compatibility. In this work, 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO)-oxidized cellulose nanofibers (TOCN) and activated carbon (AC) were used to form composite beads by the drop curing method to improve hemocompatibility.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!