First- and second-generation dendrimers (Ru3 and Ru6) have been synthesized, and their photophysical properties were investigated in solution and when adsorbed on the nanocrystalline TiO2 surface. The performance of Ru3 and Ru6 as charge transfer photosensitizers in nanocrytalline TiO2 based solar cells was also investigated. The best photovoltaic performance was obtained by the Ru3 based solar cell yielding a short circuit current of J sc = 5.52 mA.cm (-2) and an open circuit voltage of V oc = 626 mV, corresponding to an overall conversion efficiency of eta = 1.80% that is approximately double the conversion efficiency of the reference compound Ru1 (eta = 0.91%) and of the second generation dendrimer Ru6 (eta = 0.95%). The particular efficiency of the first generation dendrimer, Ru3, is attributed to the better light-harvesting properties of the doped nanocrystalline TiO2 film when compared to Ru1, whereas the poor performance of the second generation dendrimer, Ru6, is attributed to the uneven adsorption of all of the ruthenium moieties to the nanocrystalline TiO2 surface at the same time.

Download full-text PDF

Source
http://dx.doi.org/10.1021/ic702432uDOI Listing

Publication Analysis

Top Keywords

nanocrystalline tio2
12
generation dendrimer
12
photophysical properties
8
solar cells
8
ru3 ru6
8
tio2 surface
8
performance ru3
8
based solar
8
conversion efficiency
8
second generation
8

Similar Publications

Water pollution, resulting from industrial effluents, agricultural runoff, and pharmaceutical residues, poses serious threats to ecosystems and human health, highlighting the need for innovative approaches to effective remediation, particularly for non-biodegradable emerging pollutants. This research work explores the influence of shape-controlled nanocrystalline titanium dioxide (TiO NC), synthesized by a simple hydrothermal method, on the photodegradation efficiency of three different classes of emerging environmental pollutants: phenol, pesticides (methomyl), and drugs (sodium diclofenac). Experiments were conducted to assess the influence of the water matrix on treatment efficiency by using ultrapure water and stormwater (basic) collected from an urban drainage system as matrices.

View Article and Find Full Text PDF

Carbon Nanosphere-Based TiO Double Inverse Opals.

Molecules

January 2025

Institute of Physical Metallurgy, Metal Forming and Nanotechnology, University of Miskolc, H-3515 Miskolc, Hungary.

Inverse opals (IOs) are intensively researched in the field of photocatalysis, since their optical properties can be fine-tuned by the initial nanosphere size and material. Another possible route for photonic crystal programming is to stack IOs with different pore sizes. Accordingly, single and double IOs were synthesized using vertical deposition and atomic layer deposition.

View Article and Find Full Text PDF

Nanocrystalline TiO is a perspective semiconductor gas-sensing material due to its long-term stability of performance, but it is limited in application because of high electrical resistance. In this paper, a gas-sensing nanocomposite material with p-p heterojunction is introduced based on p-conducting Cr-doped TiO in combination with p-conducting CrO. Materials were synthesized via a single-step flame spray pyrolysis (FSP) technique and comprehensively studied by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) specific surface area analysis, transition electron microscopy (TEM), energy dispersive X-ray (EDX) spectroscopy, X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), and Raman spectroscopy.

View Article and Find Full Text PDF

Engineering Active Interfaces on the Surface of Porous Single-Crystalline TiO Monoliths for Enhanced Catalytic Activity and Stability.

Research (Wash D C)

January 2025

Key Laboratory of Design & Assembly of Functional Nanostructures, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002, China.

The engineering design and construction of active interfaces represents a promising approach amidst numerous initiatives aimed at augmenting catalytic activity. Herein, we present a novel approach to incorporate interconnected pores within bulk single crystals for the synthesis of macroscopic porous single-crystalline rutile titanium oxide (R-TiO). The porous single crystal (PSC) R-TiO couples a nanocrystalline framework as the solid phase with pores as the fluid phase within its structure, providing unique advantages in localized structure construction and in the field of catalysis.

View Article and Find Full Text PDF

Enhanced production of jet fuel precursors via furfural/cyclopentanone aldol condensation by synergistic pairing TiO with nano-ZSM-5 zeolite.

Bioresour Technol

November 2024

Thermochemical Processes Unit, IMDEA Energy Institute, Avda. Ramón de la Sagra, 3, E28935, Móstoles, Madrid, Spain; Group of Chemical and Environmental Engineering, Rey Juan Carlos University, C/ Tulipán s/n, E28933, Móstoles, Madrid, Spain. Electronic address:

Aldol condensation of biomass-derived compounds offers a sustainable route to jet fuel precursors. This study explores catalysts based on nanocrystalline ZSM-5 zeolite (n-ZSM-5) modified with various metals (Ca, Mg, Sn, Ti, Zr) for the aldol condensation of furfural (FFL) and cyclopentanone (CPO). While both reactants can enter the ZSM-5 micropores, the resulting C10 (FC) and C15 (FC) adducts are too large to be formed within or to exit the microporosity, being instead produced over the external acid sites.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!