The normal-incidence efficiencies of two 4800-grooves/mm ruled replica gratings, one with a dual-bandpass molybdenum/silicon multilayer coating and the other with a gold coating, were measured by use of synchrotron radiation in the 125-325-A wavelength region. The peak reflectance of the multilayer coating was 22% in the first Bragg order near 235 A and 28% in the second Bragg order near 126 A. The peak efficiency of the multilayer grating was 2.6% in the first diffraction order near 225 A and 0.3% in the second diffraction order near 125 A. The efficiencies of the multilayer grating were much higher than the corresponding efficiencies of the gold grating. The characterization of the surfaces of the gratings by atomic force microscopy indicated rms microroughness values in the 5-18-microm(-1) frequency range of 12-20 A for the multilayer grating and 22-32 A for the gold grating. Both gratings had bumpy surface features larger than the nominal groove height. The rather large surface roughness and groove irregularities had a detrimental effect on the grating efficiencies.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/ao.38.001920 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Nonlinear emission phenomena observed in transition metal dichalcogenides (TMDCs) have significantly advanced the development of robust nonlinear optical sources within two-dimensional materials. However, the intrinsic emission characteristics of TMDCs are inherently dependent on the specific material, which constrains their tunability for practical applications. In this study, we propose a strategy for the selective enhancement and modification of second-harmonic generation (SHG) emission in a multilayer WS flake through the implementation of a silicon (Si)-based circular Bragg grating (CBG) structure positioned on an Au/SiO substrate.
View Article and Find Full Text PDFIn this work, a specially designed multilayer indium tin oxide (ITO) mesh structure metasurface was proposed as a microwave absorber, achieving both excellent angle-insensitive broadband absorption and high shielding effectiveness (SE). It features gradually changing surface resistance ( ), to expand the absorption bandwidth while maintaining high SE. Also, a folded square ring metasurface was designed to effectively suppress surface wave grating lobes, as well as to reduce the unit size of the metasurface and thus the absorber.
View Article and Find Full Text PDFFluorescence emission regulation is of great interest for its promising applications in various fields such as microscopy, chemical analysis, encryption, and sensing. Most studies focus on the regulation of the fluorescence emission process. However, the spectral separation of excitation and emission of fluorophores requires careful design of resonances to cover both emission and excitation wavelengths, which is a better choice to enhance fluorescence intensity.
View Article and Find Full Text PDFMoiré metasurfaces with tunable near-infrared-I chiroptical responses for biomolecular chirality discrimination.
Nanoscale
January 2025
Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen 518055, China.
Manipulating circular dichroism in chiral metasurfaces has been increasingly important for a wide range of polarization-sensitive photonic applications. However, simple methods for presenting chiral nanostructures with tunable and considerable chiroptical responses in the near-infrared-I regime remains underexplored. Herein, two sheets of suspended symmetric bilayer metagratings fabricated single-step electron beam lithography are stacked into a moiré metasurface with its circular dichroism value reaching up to 20.
View Article and Find Full Text PDFThis paper addresses the burning issue of both low transmission and limited extinction ratio in polarizers based on a single layer subwavelength grating in short infrared wavelengths. In this work, an alternative polarizer with four layers of subwavelength gratings in gold, encapsulated in silica, was developed. Systematic simulations using the finite-difference time-domain (FDTD) method were carried out in designing the polarizer for the structural dimensions to ensure the highest transmission and the highest extinction ratio.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!