Sol-gel synthesized SnO2 nanoparticles with an average size of 2.0 nm obtained at 373 K were gradually annealed to 673 K in air for 25 minutes. Sequentially taken transmission electron microscopy (TEM) images showed that particle agglomeration of these non-matrix SnO2 nanocrystals was a very slow process. The blue shifts of the band gap (approximately 2.3 eV) obtained from the optical absorbance spectra were matched with the theoretical results of the size related excitonic binding energies. These calculations also supported the observed slow grain growth. The depth sensitive hardness measurements of the thin films indicated hardness in the range of 5.03 GPa to 6.79 GPa. These undoped and non-matrix SnO2 nanoparticles were also investigated with the X-ray photoelectrons spectroscopy (XPS), atomic force microscope (AFM), X-ray diffraction spectroscopy (XRD), and ac impedance analyzer.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1166/jnn.2007.875 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Synthesis of SnO₂/COF green nanomaterials for effective pesticide decomposition and promoting tomato plants growth.
Chem Asian J
January 2025
Northeast Agricultural University, College of Horticulture and Landscape Architecture, CHINA.
In last few decades, the agriculture sector is facing various type of crops diseases originated by crop pests. Among various crops the tomato plant is greatly affected by many pests such as aphids and whiteflies, which are badly decreasing tomato plant yield and effecting its growth. In last few years, various type of pesticides such as Neonicotinoids and Pyrethroids are employed with are badly effecting eco system and water bodies.
View Article and Find Full Text PDFPreparation and Gas-Sensitive Properties of SnO@BiO Core-Shell Heterojunction Structure.
Nanomaterials (Basel)
January 2025
School of Communication and Information Engineering, Xi'an University of Science and Technology, Xi'an 710054, China.
The SnO@BiO core-shell heterojunction structure was designed and synthesized via a hydrothermal method, and the structure and morphology of the synthesized samples were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Based on the conclusions from XRD and SEM, it can be observed that as the hydrothermal temperature increases, the content of BiO coated on the surface of SnO spheres gradually increases, and the diameter of BiO nanoparticles also increases. At a hydrothermal temperature of 160 °C, the SnO spheres are fully coated with BiO nanoparticles.
View Article and Find Full Text PDFImproving the Stability of Gas Diffusion Electrodes for CO Electroreduction to Formate with Sn and In-Based Catalysts at 500 mA cm: Effect of Electrode Design and Operation Mode.
ACS Omega
January 2025
Department of Chemical and Biological Engineering, The University of British Columbia, 2360 East Mall, Vancouver V6T 1Z3, Canada.
The electrochemical carbon dioxide reduction reaction (CORR) using renewable electricity sources could provide a sustainable solution for generating valuable chemicals, such as formate salt or formic acid. However, an efficient, stable, and scalable electrode generating formate at industrially viable current densities (>100 mA cm) is yet to be developed. Sn or In-based catalysts in gas diffusion electrodes (GDE) can efficiently produce formate.
View Article and Find Full Text PDFEnhanced Light Transmittance of Electron Transport Layer through Bilayer SnO2 for High-Performance Semitransparent Perovskite Solar Cells.
ChemSusChem
January 2025
North China Electric Power University, Changping district, NO.2, Beinong Road, CHINA.
Semitransparent perovskite solar cells (ST-PSCs) for building-integrated photovoltaics (BIPV) face the challenge of achieving high efficiency due to significant light loss. The SnO2 electron transport layer (ETL), utilized in n-i-p PSCs and prepared via the sol-gel method, is susceptible to aggregation on substrate, resulting in light scattering that diminishes absorption of the perovskite layer. In this study, we propose a strategy that combines atomic layer deposition (ALD) and sol-gel solution to deposit a bilayer SnO2 structure to address these issues.
View Article and Find Full Text PDFOrganic Crosslinked Tin Oxide Mitigating Buried Interface Defects for Efficient and Stable Perovskite Solar Cells.
Angew Chem Int Ed Engl
January 2025
Department of Materials Science and Engineering, Southern University of Science and Technology, Shenzhen, 518055, China.
Tin dioxide (SnO) stands as a promising material for the electron transport layer (ETL) in perovskite solar cells (PSCs) attributed to its superlative optoelectronic properties. The attainment of superior power conversion efficiency hinges critically on the preparation of high-quality SnO thin films. However, conventional nanoparticle SnO colloids often suffer from inherent issues such as numerous oxygen vacancy defects and film non-uniformity.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!